scholarly journals Au Nanoparticle Monolayer Nanosheets as Flexible Transparent Conductive Electrodes

Author(s):  
Mizuki Matsukawa ◽  
Ke-Hsuan Wang ◽  
Yoshiro Imura ◽  
Takeshi Kawai
2020 ◽  
Vol 16 (5) ◽  
pp. 793-804
Author(s):  
Naimeh Mahheidari ◽  
Jamal Rashidiani ◽  
Hamid Kooshki ◽  
Khadijeh Eskandari

Background: Today, nanoparticles hold great promise in biomedical researches and applications including bacteria detection. The rapid and sensitive outcomes of bacteria detection strategies using nanoparticle conjugates become determinative, especially in bacterial outbreaks. In the current research, we focused on detecting V. cholera bacteria and its toxin using a thiocyanate/Au nanoparticle. Thiocyanate adsorbed strongly on the surface of gold nanoparticles and changed the surface by enhancing surface plasmon resonance of gold nanoparticles. Objective: This method is tried to introduce a simple and fast procedure to assay vibrio cholera. So, it is observed by the naked eyes as well. Methods: We used two antibodies (Ab) for V. cholera detection: a) a primary antibody conjugated to magnetic nanoparticles (MNPs) for trapping V. cholera bacterial cells, and b) a secondary Abconjugated thiocyanate-GNPs as a colorimetric detector. Then, an immuno-magnetic separation system connected to a colorimetric assay was designed based on the GNPs. The results were measured by ultraviolet-visible (UV-Vis) spectroscopy. Results: The results showed that gold nanoparticles are an appropriate optical assay for detecting biological samples in a minimum concentration and also it can be easily seen by the naked eyes. The linear range of this biosensor is 3.2×104 to 28×104 cells per ml. Conclusion: In this research, a colorimetric immune assay based on gold nanoparticles was designed to improve the sensitivity of V. cholera detection. Also, this method can be used for the detection of other biological agents.


2019 ◽  
Vol 8 (1) ◽  
pp. 56-61
Author(s):  
Aneeya K. Samantara ◽  
Debasrita Dash ◽  
Dipti L. Bhuyan ◽  
Namita Dalai ◽  
Bijayalaxmi Jena

: In this article, we explored the possibility of controlling the reactivity of ZnO nanostructures by modifying its surface with gold nanoparticles (Au NPs). By varying the concentration of Au with different wt% (x = 0.01, 0.05, 0.08, 1 and 2), we have synthesized a series of (ZnO/Aux) nanocomposites (NCs). A thorough investigation of the photocatalytic performance of different wt% of Au NPs on ZnO nanosurface has been carried out. It was observed that ZnO/Au0.08 nanocomposite showed the highest photocatalytic activity among all concentrations of Au on the ZnO surface, which degrades the dye concentration within 2 minutes of visible light exposure. It was further revealed that with an increase in the size of plasmonic nanoparticles beyond 0.08%, the accessible surface area of the Au nanoparticle decreases. The photon absorption capacity of Au nanoparticle decreases beyond 0.08% resulting in a decrease in electron transfer rate from Au to ZnO and a decrease of photocatalytic activity. Background: Due to the industrialization process, most of the toxic materials go into the water bodies, affecting the water and our ecological system. The conventional techniques to remove dyes are expensive and inefficient. Recently, heterogeneous semiconductor materials like TiO2 and ZnO have been regarded as potential candidates for the removal of dye from the water system. Objective: To investigate the photocatalytic performance of different wt% of Au NPs on ZnO nanosurface and the effect of the size of Au NPs for photocatalytic performance in the degradation process. Methods: A facile microwave method has been adopted for the synthesis of ZnO nanostructure followed by a reduction of gold salt in the presence of ZnO nanostructure to form the composite. Results: ZnO/Au0.08 nanocomposite showed the highest photocatalytic activity which degrades the dye concentration within 2 minutes of visible light exposure. The schematic mechanism of electron transfer rate was discussed. Conclusion: Raspberry shaped ZnO nanoparticles modified with different percentages of Au NPs showed good photocatalytic behavior in the degradation of dye molecules. The synergetic effect of unique morphology of ZnO and well anchored Au nanostructures plays a crucial role.


2011 ◽  
Vol 2011 ◽  
pp. 1-6 ◽  
Author(s):  
Akihiko Nagata ◽  
Takeo Oku ◽  
Tsuyoshi Akiyama ◽  
Atsushi Suzuki ◽  
Yasuhiro Yamasaki ◽  
...  

Phthalocyanines/fullerene organic photovoltaic cells were fabricated and characterized. Effects of Au nanoparticle addition to a hole transfer layer were also investigated, and power conversion efficiencies of the photovoltaic cells were improved after blending the Au nanoparticle into PEDOT:PSS. Nanostructures of the Au nanoparticles were investigated by transmission electron microscopy and X-ray diffraction. Energy levels of molecules were calculated by molecular orbital calculations, and the nanostructures and electronic property were discussed.


2010 ◽  
Vol 11 (4) ◽  
pp. 1052-1059 ◽  
Author(s):  
Stacey Kirkland-York ◽  
Yilin Zhang ◽  
Adam E. Smith ◽  
Adam W. York ◽  
Faqing Huang ◽  
...  

Nanophotonics ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Yingying Jin ◽  
Liu Yang ◽  
Chenxinyu Pan ◽  
Zhangxing Shi ◽  
Bowen Cui ◽  
...  

Abstract By placing a single Au nanoparticle on the surface of a cadmium sulfide (CdS) nanowire, we demonstrate strong coupling of localized surface plasmon resonance (LSPR) modes in the nanoparticle and whispering gallery modes (WGMs) in the nanowire. For a 50-nm-diameter Au-nanosphere particle, strong coupling occurs when the nanowire diameter is between 300 and 600 nm, with a mode splitting up to 80 meV. Using a temperature-induced spectral shift of the resonance wavelength, we also observe the anticrossing behavior in the strongly coupled system. In addition, since the Au nanosphere has spherical symmetry, the supported LSPR mode can be selectively coupled with transverse electric (TE) and transverse magnetic (TM) WGMs in the nanowire. The ultracompact strong-coupling system shown here may provide a versatile platform for studying hybrid “photon–plasmon” nanolasers, nonlinear optical devices, and nanosensors.


Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 766
Author(s):  
Tihomir Car ◽  
Ivan Jakovac ◽  
Ivana Šarić ◽  
Sigrid Bernstorff ◽  
Maja Micetic

Structural, optical and electrical properties of Al+MoO3 and Au+MoO3 thin films prepared by simultaneous magnetron sputtering deposition were investigated. The influence of MoO3 sputtering power on the Al and Au nanoparticle formation and spatial distribution was explored. We demonstrated the formation of spatially arranged Au nanoparticles in the MoO3 matrix, while Al incorporates in the MoO3 matrix without nanoparticle formation. The dependence of the Au nanoparticle size and arrangement on the MoO3 sputtering power was established. The Al-based films show a decrease of overall absorption with an Al content increase, while the Au-based films have the opposite trend. The transport properties of the investigated films also are completely different. The resistivity of the Al-based films increases with the Al content, while it decreases with the Au content increase. The reason is a different transport mechanism that occurs in the films due to their different structural properties. The choice of the incorporated material (Al or Au) and its volume percentage in the MoO3 matrix enables the design of materials with desirable optical and electrical characteristics for a variety of applications.


2021 ◽  
Vol 13 (4) ◽  
pp. 4886-4893
Author(s):  
Yuning Wang ◽  
Kun Zhang ◽  
Tongtong Tian ◽  
Weilong Shan ◽  
Liang Qiao ◽  
...  

2020 ◽  
Vol 3 (12) ◽  
pp. 12388-12393
Author(s):  
Bofan Zhao ◽  
Indu Aravind ◽  
Sisi Yang ◽  
Yu Wang ◽  
Ruoxi Li ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document