Flexible Regenerated Cellulose/Boron Nitride Nanosheet High-Temperature Dielectric Nanocomposite Films with High Energy Density and Breakdown Strength

2018 ◽  
Vol 6 (5) ◽  
pp. 7151-7158 ◽  
Author(s):  
Jiaping Lao ◽  
Haian Xie ◽  
Zhuqun Shi ◽  
Gang Li ◽  
Bei Li ◽  
...  
Keyword(s):  
High Temperature ◽  
Energy Density ◽  
Boron Nitride ◽  
Breakdown Strength ◽  
High Energy ◽  
High Energy Density ◽  
Nanocomposite Films ◽  
Regenerated Cellulose ◽  
Boron Nitride Nanosheet

Cellulose nanofibril/boron nitride nanosheet composites with enhanced energy density and thermal stability by interfibrillar cross-linking through Ca2+

2018 ◽  
Vol 6 (4) ◽  
pp. 1403-1411 ◽  
Author(s):  
Junwei Yang ◽  
Haian Xie ◽  
Hao Chen ◽  
Zhuqun Shi ◽  
Tao Wu ◽  
...  
Keyword(s):  
Energy Density ◽  
Breakdown Strength ◽  
Dielectric Materials ◽  
High Energy ◽  
High Energy Density ◽  
Cross Linking ◽  
Cellulose Nanofibril ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Boron Nitride Nanosheet

Flexible and eco-friendly dielectric materials with high energy density and breakdown strength have promising applications in energy storage devices.

Aromatic Polyurea for High Temperature High Energy Density Capacitors

2008 ◽  
Vol 1134 ◽  
Author(s):  
Yong Wang ◽  
Xin Zhou ◽  
Minren Lin ◽  
Sheng-Guo David Lu ◽  
Jun-Hong Lin ◽  
...  
Keyword(s):  
High Temperature ◽  
Energy Density ◽  
High Performance ◽  
High Efficiency ◽  
Breakdown Strength ◽  
Dielectric Material ◽  
Weibull Model ◽  
High Energy ◽  
High Energy Density ◽  
Low Dissipation

AbstractWe investigate aromatic polyureas which can be fabricated in the form of thin films through CVD. It was found that the polymer possesses a flat dielectric response (k∼ 4.2 and loss <1%)) to more than 200°C. The frequency-independent dielectric properties in the investigated frequency range(1kHz∼1MHz), low conductance, low dissipation factor (∼0.005), high breakdown strength (>800MV/m), high energy density (>12J/cm3) and high efficiency suggest this polymer can be a good candidate material for high temperature energy storage capacitors. Breakdown strength was analyzed with Weibull model over a broad temperature range (25°C ∼180°C). Experimental results indicate that aromatic polyurea is more like a nonpolar linear dielectric material because of its highly cross-linked structures. The experiment results further show that this polymer maintains its high performance even at high temperatures.

scholarly journals Recent Advances in the Synthesis of Polymer-Grafted Low-K and High-K Nanoparticles for Dielectric and Electronic Applications

Molecules ◽  
2021 ◽  
Vol 26 (10) ◽  
pp. 2942
Author(s):  
Bhausaheb V. Tawade ◽  
Ikeoluwa E. Apata ◽  
Nihar Pradhan ◽  
Alamgir Karim ◽  
Dharmaraj Raghavan
Keyword(s):  
Energy Density ◽  
Polymer Nanocomposites ◽  
High Performance ◽  
Breakdown Strength ◽  
Polymer Nanocomposite ◽  
High Energy ◽  
Polymer Chains ◽  
High Energy Density ◽  
Grafted Nanoparticles ◽  
Grafting From

The synthesis of polymer-grafted nanoparticles (PGNPs) or hairy nanoparticles (HNPs) by tethering of polymer chains to the surface of nanoparticles is an important technique to obtain nanostructured hybrid materials that have been widely used in the formulation of advanced polymer nanocomposites. Ceramic-based polymer nanocomposites integrate key attributes of polymer and ceramic nanomaterial to improve the dielectric properties such as breakdown strength, energy density and dielectric loss. This review describes the ”grafting from” and ”grafting to” approaches commonly adopted to graft polymer chains on NPs pertaining to nano-dielectrics. The article also covers various surface initiated controlled radical polymerization techniques, along with templated approaches for grafting of polymer chains onto SiO2, TiO2, BaTiO3, and Al2O3 nanomaterials. As a look towards applications, an outlook on high-performance polymer nanocomposite capacitors for the design of high energy density pulsed power thin-film capacitors is also presented.

Enhanced dielectric properties and thermostability in polyimide composites with core-shell structured polyimide@BaTiO3 nanoparticles

2021 ◽  
pp. 095400832199352
Author(s):  
Wei Deng ◽  
Guanguan Ren ◽  
Wenqi Wang ◽  
Weiwei Cui ◽  
Wenjun Luo
Keyword(s):  
Dielectric Constant ◽  
Dielectric Loss ◽  
Energy Density ◽  
Breakdown Strength ◽  
In Situ Polymerization ◽  
Dielectric Materials ◽  
High Energy ◽  
Amic Acid ◽  
High Energy Density ◽  
Core Shell

Polymer composites with high dielectric constant and thermal stability have shown great potential applications in the fields relating to the energy storage. Herein, core-shell structured polyimide@BaTiO3 (PI@BT) nanoparticles were fabricated via in-situ polymerization of poly(amic acid) (PAA) and the following thermal imidization, then utilized as fillers to prepare PI composites. Increased dielectric constant with suppressed dielectric loss, and enhanced energy density as well as heat resistance were simultaneously realized due to the presence of PI shell between BT nanoparticles and PI matrix. The dielectric constant of PI@BT/PI composites with 55 wt% fillers increased to 15.0 at 100 Hz, while the dielectric loss kept at low value of 0.0034, companied by a high energy density of 1.32 J·cm−3, which was 2.09 times higher than the pristine PI. Moreover, the temperature at 10 wt% weight loss reached 619°C, demonstrating the excellent thermostability of PI@BT/PI composites. In addition, PI@BT/PI composites exhibited improved breakdown strength and toughness as compared with the BT/PI composites due to the well dispersion of PI@BT nanofillers and the improved interfacial interactions between nanofillers and polymer matrix. These results provide useful information for the structural design of high-temperature dielectric materials.

Poly(tetrafluoroethylene-hexafluoropropylene) films with high energy density and low loss for high-temperature pulse capacitors

Polymer ◽  
2017 ◽  
Vol 114 ◽  
pp. 311-318 ◽  
Author(s):  
Xiaomeng Zhang ◽  
Yifei Zhao ◽  
Yuhao Wu ◽  
Zhicheng Zhang
Keyword(s):  
High Temperature ◽  
Energy Density ◽  
High Energy ◽  
High Energy Density ◽  
Low Loss ◽  
Temperature Pulse

High temperature thermal storage materials with high energy density and conductivity

Solar Energy ◽  
2018 ◽  
Vol 163 ◽  
pp. 307-314 ◽  
Author(s):  
Samuel Reed ◽  
Heber Sugo ◽  
Erich Kisi
Keyword(s):  
High Temperature ◽  
Energy Density ◽  
Thermal Storage ◽  
High Energy ◽  
High Energy Density ◽  
Storage Materials
Sign in / Sign up

Export Citation Format

Share Document