Fluid catalytic cracking catalyst demetalation by converting metal poisons to washable sulfur containing compounds

1986 ◽  
Vol 25 (4) ◽  
pp. 549-553 ◽  
Author(s):  
Jin S. Yoo ◽  
J. A. Karch ◽  
E. H. Burk
Keyword(s):  
Catalytic Cracking ◽  
Fluid Catalytic Cracking ◽  
Sulfur Containing ◽  
Sulfur Containing Compounds

scholarly journals THE REACTION OF NITROUS ACID WITH CYSTINE AND RELATED SULFUR-CONTAINING COMPOUNDS

1934 ◽  
Vol 104 (3) ◽  
pp. 601-610 ◽  
Author(s):  
S. Allan Lough ◽  
Howard B. Lewis
Keyword(s):  
Nitrous Acid ◽  
Sulfur Containing ◽  
Sulfur Containing Compounds

Modeling, simulation, and optimization for producing ultra-low sulfur and high-octane number gasoline by separation and conversion of fluid catalytic cracking naphtha

Fuel ◽  
2021 ◽  
Vol 299 ◽  
pp. 120740
Author(s):  
Yuhao Zhang ◽  
Mengmeng Liu ◽  
Liang Zhao ◽  
Suxin Liu ◽  
Jinsen Gao ◽  
...  
Keyword(s):  
Octane Number ◽  
Catalytic Cracking ◽  
Fluid Catalytic Cracking ◽  
Simulation And Optimization ◽  
Modeling Simulation ◽  
Low Sulfur ◽  
High Octane

scholarly journals Research on Hazardous Waste Removal Management: Identification of the Hazardous Characteristics of Fluid Catalytic Cracking Spent Catalysts

Molecules ◽  
2021 ◽  
Vol 26 (8) ◽  
pp. 2289
Author(s):  
Haihui Fu ◽  
Yan Chen ◽  
Tingting Liu ◽  
Xuemei Zhu ◽  
Yufei Yang ◽  
...  
Keyword(s):  
Surface Water ◽  
Hazardous Waste ◽  
Environmental Quality ◽  
Catalytic Cracking ◽  
Petroleum Refining ◽  
Fluid Catalytic Cracking ◽  
Refining Industry ◽  
Spent Catalyst ◽  
Spent Catalysts ◽  
Petroleum Refining Industry

Fluid catalytic cracking (FCC) spent catalysts are the most common catalysts produced by the petroleum refining industry in China. The National Hazardous Waste List (2016 edition) lists FCC spent catalysts as hazardous waste, but this listing is very controversial in the petroleum refining industry. This study collects samples of waste catalysts from seven domestic catalytic cracking units without antimony-based passivation agents and identifies their hazardous characteristics. FCC spent catalysts do not have the characteristics of flammability, corrosiveness, reactivity, or infectivity. Based on our analysis of the components and production process of the FCC spent catalysts, we focused on the hazardous characteristic of toxicity. Our results show that the leaching toxicity of the heavy metal pollutants nickel, copper, lead, and zinc in the FCC spent catalyst samples did not exceed the hazardous waste identification standards. Assuming that the standards for antimony and vanadium leachate are 100 times higher than that of the surface water and groundwater environmental quality standards, the leaching concentration of antimony and vanadium in the FCC spent catalyst of the G set of installations exceeds the standard, which may affect the environmental quality of surface water or groundwater. The quantities of toxic substances in all spent FCC catalysts, except those from G2, does not exceed the standard. The acute toxicity of FCC spent catalysts in all installations does not exceed the standard. Therefore, we exclude “waste catalysts from catalytic cracking units without antimony-based passivating agent passivation nickel agent” from the “National Hazardous Waste List.”

Combined mild hydrocracking and fluid catalytic cracking process for efficient conversion of light cycle oil into high-quality gasoline

Fuel ◽  
2021 ◽  
Vol 292 ◽  
pp. 120364
Author(s):  
Peipei Miao ◽  
Xiaolin Zhu ◽  
Yangling Guo ◽  
Jie Miao ◽  
Mengyun Yu ◽  
...  
Keyword(s):  
Catalytic Cracking ◽  
Fluid Catalytic Cracking ◽  
Light Cycle ◽  
High Quality ◽  
Light Cycle Oil ◽  
Efficient Conversion ◽  
Cycle Oil ◽  
Cracking Process

Molecular Reconstruction of Hydrocarbons and Sulfur-Containing Compounds in Atmospheric and Vacuum Gas Oils

2021 ◽  
Author(s):  
Aleksandar Bojkovic ◽  
Thomas Dijkmans ◽  
Hang Dao Thi ◽  
Marko Djokic ◽  
Kevin M. Van Geem
Keyword(s):  
Sulfur Containing ◽  
Sulfur Containing Compounds

scholarly journals Assessment of the Rheological and Mechanical Properties of Geopolymer Concrete Comprising Fly Ash and Fluid Catalytic Cracking Residue as Aluminosilicate Precursor

2021 ◽  
Vol 11 (7) ◽  
pp. 3032
Author(s):  
Tuan Anh Le ◽  
Sinh Hoang Le ◽  
Thuy Ninh Nguyen ◽  
Khoa Tan Nguyen
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Fly Ash ◽  
Flexural Strength ◽  
Catalytic Cracking ◽  
Fluid Catalytic Cracking ◽  
High Alumina ◽  
Geopolymer Concrete ◽  
Sem Images

The use of fluid catalytic cracking (FCC) by-products as aluminosilicate precursors in geopolymer binders has attracted significant interest from researchers in recent years owing to their high alumina and silica contents. Introduced in this study is the use of geopolymer concrete comprising FCC residue combined with fly ash as the requisite source of aluminosilicate. Fly ash was replaced with various FCC residue contents ranging from 0–100% by mass of binder. Results from standard testing methods showed that geopolymer concrete rheological properties such as yield stress and plastic viscosity as well as mechanical properties including compressive strength, flexural strength, and elastic modulus were affected significantly by the FCC residue content. With alkali liquid to geopolymer solid ratios (AL:GS) of 0.4 and 0.5, a reduction in compressive and flexural strength was observed in the case of geopolymer concrete with increasing FCC residue content. On the contrary, geopolymer concrete with increasing FCC residue content exhibited improved strength with an AL:GS ratio of 0.65. Relationships enabling estimation of geopolymer elastic modulus based on compressive strength were investigated. Scanning electron microscope (SEM) images and X-ray diffraction (XRD) patterns revealed that the final product from the geopolymerization process consisting of FCC residue was similar to fly ash-based geopolymer concrete. These observations highlight the potential of FCC residue as an aluminosilicate source for geopolymer products.

Sign in / Sign up

Export Citation Format

Share Document