Thermodynamic Properties ofN-Isopropylacrylamide in Water: Solubility Transition, Phase Separation of Supersaturated Solution, and Glass Formation

2010 ◽  
Vol 114 (46) ◽  
pp. 14995-15002 ◽  
Author(s):  
Shigeo Sasaki ◽  
Satoshi Okabe ◽  
Yuji Miyahara

1941 ◽  
Vol 9 (11) ◽  
pp. 801-806 ◽  
Author(s):  
Edwin N. Lassettre ◽  
John P. Howe


2010 ◽  
Vol 10 (16) ◽  
pp. 7795-7820 ◽  
Author(s):  
A. Zuend ◽  
C. Marcolli ◽  
T. Peter ◽  
J. H. Seinfeld

Abstract. Semivolatile organic and inorganic aerosol species partition between the gas and aerosol particle phases to maintain thermodynamic equilibrium. Liquid-liquid phase separation into an organic-rich and an aqueous electrolyte phase can occur in the aerosol as a result of the salting-out effect. Such liquid-liquid equilibria (LLE) affect the gas/particle partitioning of the different semivolatile compounds and might significantly alter both particle mass and composition as compared to a one-phase particle. We present a new liquid-liquid equilibrium and gas/particle partitioning model, using as a basis the group-contribution model AIOMFAC (Zuend et al., 2008). This model allows the reliable computation of the liquid-liquid coexistence curve (binodal), corresponding tie-lines, the limit of stability/metastability (spinodal), and further thermodynamic properties of multicomponent systems. Calculations for ternary and multicomponent alcohol/polyol-water-salt mixtures suggest that LLE are a prevalent feature of organic-inorganic aerosol systems. A six-component polyol-water-ammonium sulphate system is used to simulate effects of relative humidity (RH) and the presence of liquid-liquid phase separation on the gas/particle partitioning. RH, salt concentration, and hydrophilicity (water-solubility) are identified as key features in defining the region of a miscibility gap and govern the extent to which compound partitioning is affected by changes in RH. The model predicts that liquid-liquid phase separation can lead to either an increase or decrease in total particulate mass, depending on the overall composition of a system and the particle water content, which is related to the hydrophilicity of the different organic and inorganic compounds. Neglecting non-ideality and liquid-liquid phase separations by assuming an ideal mixture leads to an overestimation of the total particulate mass by up to 30% for the composition and RH range considered in the six-component system simulation. For simplified partitioning parametrizations, we suggest a modified definition of the effective saturation concentration, Cj*, by including water and other inorganics in the absorbing phase. Such a Cj* definition reduces the RH-dependency of the gas/particle partitioning of semivolatile organics in organic-inorganic aerosols by an order of magnitude as compared to the currently accepted definition, which considers the organic species only.



2019 ◽  
Vol 32 (11) ◽  
Author(s):  
Afroja Akter Mishu ◽  
Md. Ruhul Amin ◽  
Malik Abdul Rub ◽  
Md. Anamul Hoque ◽  
Shariff E. Kabir ◽  
...  


1989 ◽  
Vol 177 ◽  
Author(s):  
Daniel Blankschtein ◽  
Sudhakar Puvvada

IntroductionIn this paper we present a conceptual overview of our recently developed molecular-thermodynamic approach to predict micellization, thermodynamic properties, and phase separation of micellar solutions. A detailed exposition may be found in Ref..



1986 ◽  
Vol 85 (12) ◽  
pp. 7268-7288 ◽  
Author(s):  
Daniel Blankschtein ◽  
George M. Thurston ◽  
George B. Benedek


2020 ◽  
Author(s):  
Zeyu Deng ◽  
Gopalakrishnan Sai Gautam ◽  
Sanjeev Krishna Kolli ◽  
Jean-Nöel Chotard ◽  
Anthony K. Cheetham ◽  
...  

<p>The replacement of the presently used liquid electrolytes by a non-flammable solid electrolyte is an important avenue to create safer batteries. The Natrium Superionic CONductor<b> </b>(NaSiCON) Na<sub>1+x</sub>Zr<sub>2</sub>Si<sub>x</sub>P<sub>3-x</sub>O<sub>12</sub> (0 < x < 3) that displays high bulk ionic conductivity and good stability towards other NaSiCON-based electrodes is a good solid electrolyte in NaSiCON-based batteries. Despite the sizeable share of research on Na<sub>1+x</sub>Zr<sub>2</sub>Si<sub>x</sub>P<sub>3-x</sub>O<sub>12</sub>, the structural and thermodynamic properties of NaSiCON require better understanding for more efficient synthesis and optimization as a solid electrolyte, which often follows chemical intuition. Here, we analyze the thermodynamic properties of the NaSiCON electrolyte by constructing the Na<sub>1+x</sub>Zr<sub>2</sub>Si<sub>x</sub>P<sub>3-x</sub>O<sub>12</sub> phase diagram, based on density functional theory calculations, a cluster expansion framework, and Monte Carlo simulations. Specifically, we build the phase diagram as a function of temperature and composition (0 < x < 3) for the high-temperature rhombohedral structure, which has been also observed in several positive electrode materials, such as Na<sub>3</sub>Ti<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub>, Na<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub> and Na<sub>3</sub>Cr<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub>. Through the phase diagram, we identify the concentration domains providing the highest Na<sup>+</sup>-ion conductivity and previously unreported phase-separation behavior across three different single-phase regions. Further, we note the similarities in the phase behavior between Na<sub>1+x</sub>Zr<sub>2</sub>Si<sub>x</sub>P<sub>3-x</sub>O<sub>12</sub> and other NaSiCON-based mono-transition metal electrodes and discuss the potential competition between thermodynamics and kinetics in experimentally observed phase separation. Our work is an important addition in understanding the thermodynamics of NaSiCON-based materials and in the development of inexpensive Na-ion batteries. From our results we propose that the addition of SiO<sub>4</sub><sup>4–</sup> moieties to single-transition metal NaSiCON-phosphate-based electrodes will slow significantly the kinetics toward phase separation. </p>



1980 ◽  
Vol 41 (C8) ◽  
pp. C8-313-C8-316
Author(s):  
T. Shiotani ◽  
T. Ichimura ◽  
A. Ueda


2007 ◽  
Vol 361-363 ◽  
pp. 265-268
Author(s):  
Leila Lefebvre ◽  
Laurent Gremillard ◽  
Jérôme Chevalier ◽  
Didier Bernache-Assollant

In this study, we report on the effect of Bioglass® structural transformations on its sintering behaviour. In a previous paper, we showed that while heating up to 1000°C, five successive transformations occur: glassy transition, phase separation, two crystallization processes and a second glassy transition. The sintering of the material exhibits two main shrinkage stages associated to the two glassy transitions at 550°C and 850°C. At 580°C, the glass-in-glass phase separation induces a decrease of the sintering rate immediately followed by the crystallisation of the major phase Na2CaSi2O6 between 600 and 700°C, from the surface to the bulk of the particles. A completed inhibition of sintering takes place followed by a minor shrinkage due to volume crystallization. A plateau is observed until the second glassy transition.





Sign in / Sign up

Export Citation Format

Share Document