scholarly journals Achieving fast start-up of anammox process by promoting the growth of anammox bacteria with FeS addition

2020 ◽  
Vol 3 (1) ◽  
Author(s):  
Chunzhen Zou ◽  
Beibei Guo ◽  
Xuming Zhuang ◽  
Liying Ren ◽  
Shou-Qing Ni ◽  
...  
Keyword(s):  
Microbial Community ◽  
Nitrogen Removal ◽  
Nitrite Reductase ◽  
Removal Rate ◽  
Anammox Bacteria ◽  
Gene Encoding ◽  
Start Up ◽  
Fast Start ◽  
The Difference ◽  
Anammox Process

Abstract The effects of FeS on nitrogen removal performance and microbial community of anammox process were studied. During the start-up period, the removal efficiencies of nitrite and total nitrogen were significantly improved by FeS. The addition of FeS increased the content of iron ions in the reactor and promoted the synthesis of heme c, which was involved in the formation of various enzymes. Compared with the control, the abundance of anammox bacteria in the FeS reactor was increased by 29%, and the expression level of the nirS gene (encoding cd1 type nitrite reductase containing heme) was nearly doubled. The content of nitrite reductase (ammonia-forming) in the community was increased by 26.4%. The difference in functional bacteria and enzyme contents in the microbial community resulted in a difference in nitrogen removal rate (NRR) between the two reactors. High-throughput results indicated that FeS increased the richness and diversity of microbial community and enhanced the metabolic function of the microbial community. The addition of FeS did not change the dominant position of Ca. Kuenenia in both reactors. But the relative abundance of heterotrophic denitrifying bacteria was reduced with FeS, which may be related to the inhibition effect of S2− produced by FeS.

scholarly journals Start – Up Proses Anammox Menggunakan Lumpur Telaga Kotobaru sebagai Inokulum

2020 ◽  
Vol 21 (2) ◽  
pp. 138-146
Author(s):  
Randi Permana Putra ◽  
Zulkarnaini Zulkarnaini ◽  
Puti Sri Komala
Keyword(s):  
Nitrogen Removal ◽  
Removal Rate ◽  
Colorimetric Method ◽  
Nitrogen Loading ◽  
Continuous Reactor ◽  
Anammox Bacteria ◽  
Tropical Country ◽  
Method Performance ◽  
Start Up ◽  
Anammox Process

ABSTRACTThe anammox process plays an essential role in removing nitrogen from the waters anaerobically. Since the discovery of anammox in 1995, no studies have reported anammox bacteria from the Indonesian environment. This research aims to begin exploring anammox bacteria from the environment in Indonesia as a tropical country. The exploration was carried out with a start-up anammox process in a continuous reactor. The reactor was constructed using a housing filter equipped with a string wound filter as a supporting media for biofilm. Sludge from Koto Baru Lake, Tanah Datar, Indonesia, was used as inoculum. The substrate was fed into the reactor through the inside of the filter using a peristaltic pump. Ammonium and nitrite were supplemented to the substrate at a 70-150 mg-N/L concentration and operated at room temperature. The samples were collected once a week. Ammonium and nitrite were measured using the colorimetric method, nitrate using the ultraviolet spectrophotometric method. Performance of nitrogen removal and the growth biofilm in the reactor shown the success of the start of the anammox process. After 140 days of reactor operation, the maximum value of nitrogen removal rate (NRR) was 0.271 kg-N/m3.day at the nitrogen loading rate (NLR) 0.3095 kg-N/m3.day. Ammonium conversion efficiency (ACE) and nitrogen removal efficiency (NRE) during start-up were 97.07% and 91.92%. Red biofilm growth on the filter and the reactor's inner wall, which is characteristic of the anammox bacteria biomass.Keywords: anammox, Indonesia, Koto Baru Lake, tropical   ABSTRAKProses anammox memiliki peran penting dalam penyisihan nitrogen dari perairan secara anaerobik. Sejak ditemukannya anammox pada 1995, belum ada penelitian yang melaporkan keberadaan bakteri anammox dari lingkungan Indonesia. Tujuan dari penelitian ini adalah untuk memulai eksplorasi bakteri anammox dari lingkungan di Indonesia sebagai negara tropis. Eksplorasi dilakukan dengan start-up proses anammox pada sebuah reaktor kontinu. Reaktor terdiri dari housing filter yang dilengkapi dengan string wound filter sebagai media lekat untuk biofilm. Lumpur dari Telaga Koto Baru digunakan sebagai inokulum. Substrat dialirkan ke dalam reaktor melalui bagian dalam filter menggunakan pompa peristaltik. Amonium dan nitrit ditambahkan ke substrat dengan konsentrasi 70-150 mg-N/L dan dioperasikan pada suhu kamar. Konsentrasi amonium dan nitrit diukur dengan metode kolorimetri, serta konsentrasi nitrat dianalisis menggunakan metode spektrofotometri UV dengan interval pengukuran sampel setiap 5 hari. Pengamatan penyisihan nitrogen dan pertumbuhan biofilm di reaktor menunjukkan keberhasilan dimulainya proses anammox. Setelah 140 hari operasional reaktor, didapatkan nilai tingkat penyisihan nitrogen  (TPyN) maksimum 0,271 kg-N/m3.hari pada tingkat pemuatan nitrogen (TPN) 0,3095 kg-N/m3.hari. Nilai efisiensi konversi amonium (EKA) dan efisiensi penyisihan nitrogen (EPN) maksimum selama start-up adalah : 97,07% dan 91,92%. Biofilm berwarna merah tumbuh pada filter dan dinding bagian dalam reaktor yang merupakan karakteristik dari biomasa bakteri anammox.Kata kunci: anammox, Indonesia, Telaga Koto Baru, tropis

Assessment of Inocula and N-Removal Performance of Anaerobic Ammonium Oxidation (ANAMMOX) for the Treatment of Aged Landfill Leachates

2012 ◽  
Vol 518-523 ◽  
pp. 2391-2398
Author(s):  
Yan He ◽  
Gong Ming Zhou ◽  
Min Sheng Huang ◽  
Min Tong
Keyword(s):  
Activated Sludge ◽  
Nitrogen Removal ◽  
Removal Rate ◽  
Granular Sludge ◽  
Nitrogen Loading ◽  
Anaerobic Granular Sludge ◽  
Landfill Leachates ◽  
N Removal ◽  
Start Up ◽  
Anammox Process

Three kinds of seeding sludge, i.e. conventional activated sludge, anaerobic granular sludge and the nitrifying activated sludge from the nitritation reactor treating aged leachates were evaluated in batch mode to screen the optimized inoculum for the rapid start-up of ANAMMOX reactor. The feasibility of the ANAMMOX process for the treatment of aged leachates was also investigated in a modified upflow anaerobic sludge blanket (UASB, 0.05m3). The batch experiments revealed that the nitrifying activated sludge from the nitritation reactor could respectively achieve the NRR (nitrogen removal rate) of 0.0365 kg N/(m3.d) and the ARR (ammonium removal rate) of 0.013 kg N/(m3.d) on day 12, which were greatly higher than those of the other two tested sludge samples. The mixture of the aforementioned nitrifying activated sludge and anaerobic granular sludge was established as an effective inoculum for the prompt start-up of ANAMMOX reactor. The maximum total nitrogen removal rate of 0.826 kg N/(m3.d) could be obtained for the treatment of “old” leachates under NLR (nitrogen loading rate) of 1.028 kg N/(m3.d). It is concluded that the N-removal performance of ANAMMOX process is still to be improved for actual engineering application to aged landfill leachates.

Exploration of rapid start-up of the CANON process from activated sludge inoculum in a sequencing biofilm batch reactor (SBBR)

2015 ◽  
Vol 73 (3) ◽  
pp. 535-542 ◽  
Author(s):  
Yangfan Deng ◽  
Xiaoling Zhang ◽  
Ying Miao ◽  
Bo Hu
Keyword(s):  
Nitrogen Removal ◽  
Dna Analysis ◽  
Removal Rate ◽  
Batch Reactor ◽  
Ammonia Concentration ◽  
Nitrite Accumulation ◽  
Start Up ◽  
Fast Start ◽  
Total Nitrogen Removal ◽  
Canon Process

In this study, a laboratory-scale sequencing biofilm batch reactor (SBBR) was employed to explore a fast start-up of completely autotrophic nitrogen removal over nitrite (CANON) process. Partial nitrification was achieved by controlling free ammonia concentration and operating at above 30 °C; then the reactor was immediately operated with alternating periods of aerobiosis and anaerobiosis to start the anammox process. The CANON process was successfully achieved in less than 50 d, and the total-nitrogen removal efficiency and the nitrogen removal rate were 81% and 0.14 kg-N m−3 d−1 respectively. Afterwards, with the increasing of ammonium loading rate a maximum nitrogen removal rate of 0.39 kg-N m−3 d−1 was achieved on day 94. DNA analysis showed that ‘Candidatus Brocadia’ was the dominant anammox species and Nitrosomonas was the dominant aerobic ammonium-oxidizing bacteria in the CANON reactor. This study revealed that due to shortening the persistent and stable nitrite accumulation period the long start-up time of the CANON process can be significantly reduced.

Nitrogen removal efficiency and microbial community analysis of ANAMMOX biofilter at ambient temperature

2015 ◽  
Vol 71 (5) ◽  
pp. 725-733 ◽  
Author(s):  
Zeng Taotao ◽  
Li Dong ◽  
Zeng Huiping ◽  
Xie Shuibo ◽  
Qiu Wenxin ◽  
...  
Keyword(s):  
Microbial Community ◽  
Ambient Temperature ◽  
Removal Efficiency ◽  
Nitrogen Removal ◽  
Denaturing Gradient Gel Electrophoresis ◽  
Removal Rate ◽  
Ammonia Concentration ◽  
Visual Observation ◽  
Microbial Community Analysis ◽  
Anammox Bacteria

An upflow anaerobic biofilter (AF) was developed to investigate anaerobic ammonium-oxidizing (ANAMMOX) efficiency in treating low-strength wastewater at ambient temperature (15.3–23.2 °C). Denaturing gradient gel electrophoresis (DGGE) and fluorescence in situ hybridization were used to investigate treatment effects on the microbial community. Stepwise decreases in influent ammonia concentration could help ANAMMOX bacteria selectively acclimate to low-ammonia conditions. With an influent ammonia concentration of 46.5 mg/L, the AF reactor obtained an average nitrogen removal rate of 2.26 kg/(m3 day), and a removal efficiency of 75.9%. polymerase chain reaction-DGGE results showed that microbial diversity in the low matrix was greater than in the high matrix. Microbial community structures changed when the influent ammonia concentration decreased. The genus of functional ANAMMOX bacteria was Candidatus Kuenenia stuttgartiensis, which remained stationary across study phases. Visual observation revealed that the relative proportions of ANAMMOX bacteria decreased from 41.6 to 36.3% across three study phases. The AF bioreactor successfully maintained high activity due to the ANAMMOX bacteria adaptation to low temperature and substrate conditions.

scholarly journals Aplikasi Proses Anammox Dalam Penyisihan Nitrogen Menggunakan Reaktor Up-Flow Anaerobic Sludge Blanket

2020 ◽  
Vol 21 (1) ◽  
pp. 31-39
Author(s):  
Zulkarnaini Zulkarnaini ◽  
Reri Afrianita ◽  
Ilham Hagi Putra
Keyword(s):  
Nitrogen Removal ◽  
Nitrogen Loading ◽  
Laboratory Scale ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Anammox Bacteria ◽  
Stable Operation ◽  
Start Up ◽  
Anaerobic Sludge Blanket ◽  
Anammox Process

ABSTRACTAnammox process is a more practical alternative in biological nitrogen removal compared to conventional nitrification-denitrification processes. This process conducted at the optimum temperature of 370C. Indonesia, as a tropical country, has the potential for the application of anammox processes to remove nitrogen in wastewater. The purpose of this study was to analyze the efficiency of nitrogen removal in the anammox process using the Up-Flow Anaerobic Sludge Blanket (UASB) reactor at ambient temperature with variations in the hydraulic retention time (HRT) of 24 hours and 12 hours, at the laboratory scale. Samples are measured twice a week using a UV-Vis spectrophotometer. As a seeding sludge for start-up, the reactor was inoculated with granular anammox bacteria genus Candidatus Brocadia. At the stable operation, the ratio of ΔNO2--N:ΔNH4+-N and ΔNO3--N:ΔNH4+-N approach the stoichiometry of the anammox process were 1.20 and 0.21, respectively. The performance of nitrogen removal with 24-hour HRT obtained a maximum nitrogen removal rate (NRR) of 0.113 kg-N/m3.d with nitrogen loading rate (NLR) 0.14 kg-N/m3.d, and at 12-hour HRT, maximum NRR  of 0.196 kg-N/m3.d with NLR 0,28 kg-N/m3.d. Ammonium Conversion Efficiency (ACE) and Nitrogen Removal Efficiency (NRE) maximum for HRT 24 hours were 82% and 77%, respectively while HRT 12 hours were 72% and 68%, respectively. The anammox process operated stably in the tropical temperature with a temperature range of 23-280C on a laboratory scale using the UASB reactor.Keywords: anammox, nitrogen, temperature, tropical, uasb.ABSTRAKProses anammox menjadi alternatif yang lebih efektif dalam penyisihan nitrogen secara biologi dibandingkan dengan proses konvensional nitrifikasi-denitrifikasi. Proses ini berlangsung optimum pada suhu 370C. Indonesia sebagai negara tropis memiliki potensi untuk aplikasi proses anammox untuk menghilangkan nitrogen pada air limbah. Penelitian ini bertujuan untuk menganalisis efesiensi penyisihan nitrogen pada proses anammox menggunakan Up-Flow Anaerobic Sludge Blanket (UASB) reaktor pada suhu ambien dengan variasi Waktu Tinggal Hidrolik (WTH) 24 jam dan 12 jam, pada skala laboratorium. Sampel diukur dua kali setiap minggu menggunakan spektrofotometer UV-Vis. Sebagai seeding sludge (lumpur biakan) untuk start-up (memulai) reaktor digunakan bakteri anammox genus Candidatus Brocadia berbentuk granular. Berdasarkan hasil pengukuran, didapatkan nilai rasio ΔNO2--N:ΔNH4+-N dan ΔNO3--N:ΔNH4+-N mendekati stoikiometri proses anammox yaitu 1,20 dan 0,21. Kinerja penyisihan nitrogen dengan WTH 24 jam didapatkan nilai tingkat penyisihan nitrogen (TPyN ) maksimum 0,113 kg-N/m3.h pada tingkat pemuatan nitrogen (TPN) 0,14 kg-N/m3.h, dan WTH 12 jam nilai TPyN  maksimum 0,196 kg-N/m3.h pada TPN 0,28 kg-N/m3.h. Nilai efisiensi konversi amonia (EKA) dan efisiensi penyisihan nitrogen (EPN) maksimum pada WTH 24 jam berturut-turut adalah 82% dan 77%, sedangkan pada WTH 12 jam berturut-turut adalah 72% dan 68%. Penelitian membuktikan bahwa proses anammox dapat berlangsung stabil pada daerah tropis dengan suhu terukur 21-290C pada skala laboratorium menggunakan UASB reaktor. Kata kunci: Anammox, nitrogen, temperatur, tropis, uasb.

Effects of Acetate on Metabolism of Anaerobic Ammonium-Oxidizing Bacteria

2014 ◽  
Vol 1073-1076 ◽  
pp. 297-300
Author(s):  
Jia Jing Sun ◽  
Lei Zhang ◽  
Luo Wang ◽  
Xiao Bo Chen
Keyword(s):  
Nitrogen Removal ◽  
Removal Rate ◽  
Anaerobic Ammonium Oxidation ◽  
Ammonium Oxidation ◽  
Organic Matters ◽  
Start Up ◽  
Anammox Process

Anaerobic ammonium oxidation (anammox) process is a heated researched biotechnology for nitrogen removal in wastewater. The application of the process is limited due to its long start-up time and sensitivity to organic matters. This paper discussed the effects of acetate on anammox process. The nitrogen removal rate of anammox process was elevated at low acetate content (1 mmol/L) and decreased at high acetate content (3 and 4 mmol/L). The ratios among NH4+-N, NO2--N and NO3--N were not related acetate content and remained at 1:1.50:0.07, but the ratios between acetate and three forms of nitrogen were acetate dependent.

scholarly journals Start-Up of Anammox SBR from Non-Specific Inoculum and Process Acceleration Methods by Hydrazine

Water ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 350
Author(s):  
Ivar Zekker ◽  
Oleg Artemchuk ◽  
Ergo Rikmann ◽  
Kelvin Ohimai ◽  
Gourav Dhar Bhowmick ◽  
...  
Keyword(s):  
Nitrogen Removal ◽  
Biological Nutrient Removal ◽  
Anaerobic Sludge ◽  
Anammox Bacteria ◽  
Ammonium Oxidation ◽  
Reject Water ◽  
Start Up ◽  
Anammox Activity ◽  
Optimum Salinity ◽  
Anammox Process

Biological nutrient removal from wastewater to reach acceptable levels is needed to protect water resources and avoid eutrophication. The start-up of an anaerobic ammonium oxidation (anammox) process from scratch was investigated in a 20 L sequence batch reactor (SBR) inoculated with a mixture of aerobic and anaerobic sludge at 30 ± 0.5 °C with a hydraulic retention time (HRT) of 2–3 days. The use of NH4Cl, NaNO2, and reject water as nitrogen sources created different salinity periods, in which the anammox process performance was assessed: low (<0.2 g of Cl−/L), high (18.2 g of Cl−/L), or optimum salinity (0.5–2 g of Cl−/L). Reject water feeding gave the optimum salinity, with an average nitrogen removal efficiency of 80%, and a TNRR of 0.08 kg N/m3/d being achieved after 193 days. The main aim was to show the effect of a hydrazine addition on the specific anammox activity (SAA) and denitrification activity in the start-up process to boost the autotrophic nitrogen removal from scratch. The effect of the anammox intermediate hydrazine addition was tested to assess its concentration effect (range of 2–12.5 mg of N2H4/L) on diminishing denitrifier activity and accelerating anammox activity at the same time. Heterotrophic denitrifiers’ activity was diminished by all hydrazine additions compared to the control; 5 mg of N2H4/L added enhanced SAA compared to the control, achieving an SAA of 0.72 (±0.01) mg N/g MLSS/h, while the test with 7.5 mg of N2H4/L reached the highest overall SAA of 0.98 (±0.09) mg N g/MLSS/h. The addition of trace amounts of hydrazine for 6 h was also able to enhance SAA after inhibition by organic carbon source sodium acetate addition at a high C/N ratio of 10/1. The start-up of anammox bacteria from the aerobic–anaerobic suspended biomass was successful, with hydrazine significantly accelerating anammox activity and decreasing denitrifier activity, making the method applicable for side-stream as well as mainstream treatment.

Effects of Butyrate on Autotrophic Anaerobic Ammonium Oxidation (Annammox)

2014 ◽  
Vol 675-677 ◽  
pp. 410-415
Author(s):  
Hang Li ◽  
Lei Zhang ◽  
Zhi Xing Li ◽  
Xiao Bo Chen
Keyword(s):  
Nitrogen Removal ◽  
Removal Rate ◽  
Anaerobic Ammonium Oxidation ◽  
Ammonium Oxidation ◽  
Organic Matters ◽  
Start Up ◽  
Anammox Process

Anaerobic ammonium oxidation (anammox) process is a heated researched biotechnology for nitrogen removal in wastewater. The application of the process is limited due to its long start-up time and sensitivity to organic matters. This paper discussed the effects of butyrate on anammox process. The nitrogen removal rate of anammox process was elevated at low butyrate content (1 mmol/L) and decreased at high butyrate content (3 mmol/L). NH4+-N:NO2--N:NO3--N:butyrate ratio was 1:1.25:0.08:0.04 and 1:7.26:0.10:1.85 when butyrate concentration was 1 mmol/L and 3 mmol/L.

scholarly journals Start-Up, Modelling and Simulation of the Anammox Process in a Membrane Bioreactor

2012 ◽  
Vol 33 (4) ◽  
pp. 639-650 ◽  
Author(s):  
Grzegorz Cema ◽  
Adam Sochacki ◽  
Jakub Kubiatowicz ◽  
Piotr Gutwiński ◽  
Joanna Surmacz-Górska
Keyword(s):  
Removal Efficiency ◽  
Nitrogen Removal ◽  
Membrane Bioreactor ◽  
Predictive Power ◽  
Anammox Bacteria ◽  
Model Parameters ◽  
Ammonium Oxidation ◽  
Start Up ◽  
Model Predictions ◽  
Anammox Process

There are certain well-known methods of diminishing concentrations of nitrogen compounds, but they are ineffective in case of nitrogen-rich wastewater with a low content of biodegradable carbon. Partial nitritation followed by anaerobic ammonium oxidation (Anammox) process appear to be an excellent alternative for traditional nitrification and denitrification. This paper presents the feasibility of successful start-up of Anammox process in a laboratory-scale membrane bioreactor (MBR). It was shown that the combination of membrane technology and Anammox process allowed to create a new highly efficient and compact system for nitrogen removal. It was possible to achieve average nitrogen removal efficiency equal to 76.7 ± 8.3%. It was shown that the start-up period of 6 months was needed to obtain high nitrogen removal efficiency. The applied biochemical model of the Anammox process was based on the state-of-the-art Activated Sludge Model No.1 (ASM 1) which was modified for accounting activity of autotrophs (nitrite-oxidising bacteria and nitrateoxidising bacteria) and anammox bacteria. In order to increase the predictive power of the simulation selected parameters of the model were adjusted during model calibration. Readjustment of the model parameters based on the critically evaluated data of the reactor resulted in a satisfactory match between the model predictions and the actual observations.

Enhanced long-term nitrogen removal by organotrophic anammox bacteria under different C/N ratio constraints: quantitative molecular mechanism and microbial community dynamics

RSC Advances ◽  
2016 ◽  
Vol 6 (90) ◽  
pp. 87593-87606 ◽  
Author(s):  
Duntao Shu ◽  
Yanling He ◽  
Hong Yue ◽  
Junling Gao ◽  
Qingyi Wang ◽  
...  
Keyword(s):  
Microbial Community ◽  
Organic Carbon ◽  
Nitrogen Removal ◽  
Community Dynamics ◽  
Anammox Bacteria ◽  
Ammonium Oxidation ◽  
Microbial Community Dynamics ◽  
Low Levels ◽  
Anammox Process

The anaerobic ammonium oxidation (anammox) process has mainly been applied to NH4+–N-rich wastewater with very low levels of organic carbon (<0.5 g COD per g N).

Sign in / Sign up

Export Citation Format

Share Document