scholarly journals Start-Up of Anammox SBR from Non-Specific Inoculum and Process Acceleration Methods by Hydrazine

Water ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 350
Author(s):  
Ivar Zekker ◽  
Oleg Artemchuk ◽  
Ergo Rikmann ◽  
Kelvin Ohimai ◽  
Gourav Dhar Bhowmick ◽  
...  
Keyword(s):  
Nitrogen Removal ◽  
Biological Nutrient Removal ◽  
Anaerobic Sludge ◽  
Anammox Bacteria ◽  
Ammonium Oxidation ◽  
Reject Water ◽  
Start Up ◽  
Anammox Activity ◽  
Optimum Salinity ◽  
Anammox Process

Biological nutrient removal from wastewater to reach acceptable levels is needed to protect water resources and avoid eutrophication. The start-up of an anaerobic ammonium oxidation (anammox) process from scratch was investigated in a 20 L sequence batch reactor (SBR) inoculated with a mixture of aerobic and anaerobic sludge at 30 ± 0.5 °C with a hydraulic retention time (HRT) of 2–3 days. The use of NH4Cl, NaNO2, and reject water as nitrogen sources created different salinity periods, in which the anammox process performance was assessed: low (<0.2 g of Cl−/L), high (18.2 g of Cl−/L), or optimum salinity (0.5–2 g of Cl−/L). Reject water feeding gave the optimum salinity, with an average nitrogen removal efficiency of 80%, and a TNRR of 0.08 kg N/m3/d being achieved after 193 days. The main aim was to show the effect of a hydrazine addition on the specific anammox activity (SAA) and denitrification activity in the start-up process to boost the autotrophic nitrogen removal from scratch. The effect of the anammox intermediate hydrazine addition was tested to assess its concentration effect (range of 2–12.5 mg of N2H4/L) on diminishing denitrifier activity and accelerating anammox activity at the same time. Heterotrophic denitrifiers’ activity was diminished by all hydrazine additions compared to the control; 5 mg of N2H4/L added enhanced SAA compared to the control, achieving an SAA of 0.72 (±0.01) mg N/g MLSS/h, while the test with 7.5 mg of N2H4/L reached the highest overall SAA of 0.98 (±0.09) mg N g/MLSS/h. The addition of trace amounts of hydrazine for 6 h was also able to enhance SAA after inhibition by organic carbon source sodium acetate addition at a high C/N ratio of 10/1. The start-up of anammox bacteria from the aerobic–anaerobic suspended biomass was successful, with hydrazine significantly accelerating anammox activity and decreasing denitrifier activity, making the method applicable for side-stream as well as mainstream treatment.

scholarly journals Aplikasi Proses Anammox Dalam Penyisihan Nitrogen Menggunakan Reaktor Up-Flow Anaerobic Sludge Blanket

2020 ◽  
Vol 21 (1) ◽  
pp. 31-39
Author(s):  
Zulkarnaini Zulkarnaini ◽  
Reri Afrianita ◽  
Ilham Hagi Putra
Keyword(s):  
Nitrogen Removal ◽  
Nitrogen Loading ◽  
Laboratory Scale ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Anammox Bacteria ◽  
Stable Operation ◽  
Start Up ◽  
Anaerobic Sludge Blanket ◽  
Anammox Process

ABSTRACTAnammox process is a more practical alternative in biological nitrogen removal compared to conventional nitrification-denitrification processes. This process conducted at the optimum temperature of 370C. Indonesia, as a tropical country, has the potential for the application of anammox processes to remove nitrogen in wastewater. The purpose of this study was to analyze the efficiency of nitrogen removal in the anammox process using the Up-Flow Anaerobic Sludge Blanket (UASB) reactor at ambient temperature with variations in the hydraulic retention time (HRT) of 24 hours and 12 hours, at the laboratory scale. Samples are measured twice a week using a UV-Vis spectrophotometer. As a seeding sludge for start-up, the reactor was inoculated with granular anammox bacteria genus Candidatus Brocadia. At the stable operation, the ratio of ΔNO2--N:ΔNH4+-N and ΔNO3--N:ΔNH4+-N approach the stoichiometry of the anammox process were 1.20 and 0.21, respectively. The performance of nitrogen removal with 24-hour HRT obtained a maximum nitrogen removal rate (NRR) of 0.113 kg-N/m3.d with nitrogen loading rate (NLR) 0.14 kg-N/m3.d, and at 12-hour HRT, maximum NRR  of 0.196 kg-N/m3.d with NLR 0,28 kg-N/m3.d. Ammonium Conversion Efficiency (ACE) and Nitrogen Removal Efficiency (NRE) maximum for HRT 24 hours were 82% and 77%, respectively while HRT 12 hours were 72% and 68%, respectively. The anammox process operated stably in the tropical temperature with a temperature range of 23-280C on a laboratory scale using the UASB reactor.Keywords: anammox, nitrogen, temperature, tropical, uasb.ABSTRAKProses anammox menjadi alternatif yang lebih efektif dalam penyisihan nitrogen secara biologi dibandingkan dengan proses konvensional nitrifikasi-denitrifikasi. Proses ini berlangsung optimum pada suhu 370C. Indonesia sebagai negara tropis memiliki potensi untuk aplikasi proses anammox untuk menghilangkan nitrogen pada air limbah. Penelitian ini bertujuan untuk menganalisis efesiensi penyisihan nitrogen pada proses anammox menggunakan Up-Flow Anaerobic Sludge Blanket (UASB) reaktor pada suhu ambien dengan variasi Waktu Tinggal Hidrolik (WTH) 24 jam dan 12 jam, pada skala laboratorium. Sampel diukur dua kali setiap minggu menggunakan spektrofotometer UV-Vis. Sebagai seeding sludge (lumpur biakan) untuk start-up (memulai) reaktor digunakan bakteri anammox genus Candidatus Brocadia berbentuk granular. Berdasarkan hasil pengukuran, didapatkan nilai rasio ΔNO2--N:ΔNH4+-N dan ΔNO3--N:ΔNH4+-N mendekati stoikiometri proses anammox yaitu 1,20 dan 0,21. Kinerja penyisihan nitrogen dengan WTH 24 jam didapatkan nilai tingkat penyisihan nitrogen (TPyN ) maksimum 0,113 kg-N/m3.h pada tingkat pemuatan nitrogen (TPN) 0,14 kg-N/m3.h, dan WTH 12 jam nilai TPyN  maksimum 0,196 kg-N/m3.h pada TPN 0,28 kg-N/m3.h. Nilai efisiensi konversi amonia (EKA) dan efisiensi penyisihan nitrogen (EPN) maksimum pada WTH 24 jam berturut-turut adalah 82% dan 77%, sedangkan pada WTH 12 jam berturut-turut adalah 72% dan 68%. Penelitian membuktikan bahwa proses anammox dapat berlangsung stabil pada daerah tropis dengan suhu terukur 21-290C pada skala laboratorium menggunakan UASB reaktor. Kata kunci: Anammox, nitrogen, temperatur, tropis, uasb.

scholarly journals Start-Up, Modelling and Simulation of the Anammox Process in a Membrane Bioreactor

2012 ◽  
Vol 33 (4) ◽  
pp. 639-650 ◽  
Author(s):  
Grzegorz Cema ◽  
Adam Sochacki ◽  
Jakub Kubiatowicz ◽  
Piotr Gutwiński ◽  
Joanna Surmacz-Górska
Keyword(s):  
Removal Efficiency ◽  
Nitrogen Removal ◽  
Membrane Bioreactor ◽  
Predictive Power ◽  
Anammox Bacteria ◽  
Model Parameters ◽  
Ammonium Oxidation ◽  
Start Up ◽  
Model Predictions ◽  
Anammox Process

There are certain well-known methods of diminishing concentrations of nitrogen compounds, but they are ineffective in case of nitrogen-rich wastewater with a low content of biodegradable carbon. Partial nitritation followed by anaerobic ammonium oxidation (Anammox) process appear to be an excellent alternative for traditional nitrification and denitrification. This paper presents the feasibility of successful start-up of Anammox process in a laboratory-scale membrane bioreactor (MBR). It was shown that the combination of membrane technology and Anammox process allowed to create a new highly efficient and compact system for nitrogen removal. It was possible to achieve average nitrogen removal efficiency equal to 76.7 ± 8.3%. It was shown that the start-up period of 6 months was needed to obtain high nitrogen removal efficiency. The applied biochemical model of the Anammox process was based on the state-of-the-art Activated Sludge Model No.1 (ASM 1) which was modified for accounting activity of autotrophs (nitrite-oxidising bacteria and nitrateoxidising bacteria) and anammox bacteria. In order to increase the predictive power of the simulation selected parameters of the model were adjusted during model calibration. Readjustment of the model parameters based on the critically evaluated data of the reactor resulted in a satisfactory match between the model predictions and the actual observations.

scholarly journals Anammox biofilm process using sugarcane bagasse as an organic carrier

2021 ◽  
Vol 26 (1) ◽  
pp. 25
Author(s):  
Zulkarnaini Zulkarnaini ◽  
Puti Sri Komala ◽  
Arief Almi
Keyword(s):  
Sugarcane Bagasse ◽  
Nitrogen Removal ◽  
Removal Rate ◽  
Nitrogen Loading ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Ammonium Oxidation ◽  
Biofilm Process ◽  
Anaerobic Sludge Blanket ◽  
Anammox Process

The anaerobic ammonium oxidation (anammox) biofilm process commonly uses various inorganic carriers to enhance nitrogen removal under anaerobic conditions. This study aims to analyze the performance of nitrogen removal in anammox process using sugarcane bagasse as an organic carrier. The experiment was carried out by using an up‐flow anaerobic sludge blanket (UASB) reactor for treating artificial wastewater at room temperature. The reactor was fed with ammonium and nitrite with the concentrations of 70‐150 mg–N/L and variations in the hydraulic retention time of 24 and 12 h. The granular anammox belongs to the genus Candidatus Brocadia sinica that was added as an inoculum of the reactor operation. The experimental stoichiometric of anammox for ΔNO2‐–N: ΔNH4+–N and ΔNO3‐: ΔNH4+ were 1.24 and 0.18, respectively, which is similar to anammox stoichiometry. The maximum Nitrogen Removal Rate (NRR) has achieved 0.29 kg–N/m3.d at Nitrogen Loading Rate (NLR) 0.6 kg–N/m3.d. The highest ammonium conversion efficiency (ACE) and nitrogen removal efficiency (NRE) were 88% and 85%, respectively. Based on this results, it indicated that sugarcane bagasse as organic carriers could increase the amount of total nitrogen removal by provided of denitrification process but inhibited the anammox process at a certain COD concentration.

Performance and inhibition recovery of anammox reactors seeded with different types of sludge

2011 ◽  
Vol 63 (4) ◽  
pp. 710-718 ◽  
Author(s):  
S. Q. Ni ◽  
J. Meng
Keyword(s):  
Nitrogen Removal ◽  
Granular Sludge ◽  
Recovery Process ◽  
Nitrogen Loading ◽  
Anaerobic Sludge ◽  
Anammox Bacteria ◽  
Recovery Processes ◽  
Anammox Activity ◽  
Different Types ◽  
Anaerobic Sludge Blanket

In order to study the performance, inhibition and recovery processes of different types of anammox sludge, three up-flow anaerobic sludge blanket reactors were inoculated with flocculent sludge, granular sludge, and cultured inactive methanogenic granules. During stable period, with nitrogen loading rates of 0.9–1.1 kg/m3/d, the total nitrogen removal efficiencies of these reactors averaged at 86.5%, 90.8% and 93.5%, respectively. The kinetics study indicated that the reactor seeded with cultured inactive methanogenic granules possessed the highest nitrogen removal potential, followed by the granular anammox reactor and the flocculent anammox reactor. The study suggested that a concentration as high as 988.3 mg NH4+-N/L and 484.4 mg NO2−-N/L could totally inhibit granular anammox bacteria and result in a inhibition of 50% flocculent anammox activity. In addition, reactors seeded with flocculent sludge and anammox granules could be fully recovered by decreasing their influent substrate concentrations. However, the decrease of influent substrate concentration for the reactor with cultured inactive methanogenic granules could only restore about 75% of its bacterial activity. In this study, anammox bacteria purity was the major factor to evaluate the recovery ability in comparison with sludge type. Free ammonia was a more appropriate indicator for the anammox recovery process compared to free nitric acid.

High nitrogen removal rate using ANAMMOX process at short hydraulic retention time

2013 ◽  
Vol 67 (5) ◽  
pp. 968-975 ◽  
Author(s):  
C. G. Casagrande ◽  
A. Kunz ◽  
M. C. De Prá ◽  
C. R. Bressan ◽  
H. M. Soares
Keyword(s):  
Nitrogen Removal ◽  
Removal Rate ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Ammonium Oxidation ◽  
High Nitrogen ◽  
Total N ◽  
Column Reactor ◽  
Anaerobic Sludge Blanket ◽  
Anammox Process

The anaerobic ammonium oxidation (ANAMMOX) is a chemolithoautotrophic process, which converts NH4+ to N2 using nitrite (NO2−) as the electron acceptor. This process has very high nitrogen removal rates (NRRs) and is an alternative to classical nitrification/denitrification wastewater treatment. In the present work, a strategy for nitrogen removal using ANAMMOX process was tested evaluating their performance when submitted to high loading rates and very short hydraulic retention times (HRTs). An up-flow ANAMMOX column reactor was inoculated with 30% biomass (v v−1) fed from 100 to 200 mg L−1 of total N (NO2−-N + NH4+-N) at 35 °C. After start-up and process stability the maximum NRR in the up-flow anaerobic sludge blanket (UASB) reactor was 18.3 g-N L−1 d−1 operated at 0.2 h of HRT. FISH (fluorescence in situ hybridization) analysis and process stoichiometry confirmed that ANAMMOX was the prevalent process for nitrogen removal during the experiments. The results point out that high NRRs can be obtained at very short HRTs using up-flow ANAMMOX column reactor configuration.

scholarly journals Enrichment of anaerobic ammonium oxidation (anammox) bacteria for short start-up of the anammox process: a review

2015 ◽  
Vol 57 (30) ◽  
pp. 13958-13978 ◽  
Author(s):  
Mumtazah Ibrahim ◽  
Norjan Yusof ◽  
Mohd Zulkhairi Mohd Yusoff ◽  
Mohd Ali Hassan
Keyword(s):  
Anaerobic Ammonium Oxidation ◽  
Anammox Bacteria ◽  
Ammonium Oxidation ◽  
Start Up ◽  
Anammox Process

scholarly journals Achieving fast start-up of anammox process by promoting the growth of anammox bacteria with FeS addition

2020 ◽  
Vol 3 (1) ◽  
Author(s):  
Chunzhen Zou ◽  
Beibei Guo ◽  
Xuming Zhuang ◽  
Liying Ren ◽  
Shou-Qing Ni ◽  
...  
Keyword(s):  
Microbial Community ◽  
Nitrogen Removal ◽  
Nitrite Reductase ◽  
Removal Rate ◽  
Anammox Bacteria ◽  
Gene Encoding ◽  
Start Up ◽  
Fast Start ◽  
The Difference ◽  
Anammox Process

Abstract The effects of FeS on nitrogen removal performance and microbial community of anammox process were studied. During the start-up period, the removal efficiencies of nitrite and total nitrogen were significantly improved by FeS. The addition of FeS increased the content of iron ions in the reactor and promoted the synthesis of heme c, which was involved in the formation of various enzymes. Compared with the control, the abundance of anammox bacteria in the FeS reactor was increased by 29%, and the expression level of the nirS gene (encoding cd1 type nitrite reductase containing heme) was nearly doubled. The content of nitrite reductase (ammonia-forming) in the community was increased by 26.4%. The difference in functional bacteria and enzyme contents in the microbial community resulted in a difference in nitrogen removal rate (NRR) between the two reactors. High-throughput results indicated that FeS increased the richness and diversity of microbial community and enhanced the metabolic function of the microbial community. The addition of FeS did not change the dominant position of Ca. Kuenenia in both reactors. But the relative abundance of heterotrophic denitrifying bacteria was reduced with FeS, which may be related to the inhibition effect of S2− produced by FeS.

scholarly journals Start up and Stabilization of Anammox Process in an Anaerobic Membrane Bioreactor (an MBR)

2017 ◽  
pp. 117
Author(s):  
S. Suneethi ◽  
Kurian Joseph
Keyword(s):  
Membrane Bioreactor ◽  
Aquatic Toxicity ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Anammox Bacteria ◽  
Ammonium Oxidation ◽  
Anaerobic Membrane Bioreactor ◽  
Seed Culture ◽  
Start Up ◽  
Anammox Process

Release of nitrate and ammonia rich wastewaters into the natural waters promotes eutrophication, aquatic toxicity and deterioration in water quality. Anaerobic Ammonium Oxidation (ANAMMOX) process is an advanced biological nitrogen removal alternative to traditional nitrification – denitrification, which removes ammonia using nitrite as the electron acceptor without oxygen. The feasibility to enrich ANAMMOX bacteria from anaerobic seed culture to start up an Anaerobic Membrane Bioreactor (An MBR) for N – removal is reported in this paper. The seed culture used was anaerobic digester sludge collected from a Sewage Treatment Plant (STP) in Chennai. Stabilization performance of An MBR is reported for a period of 250 days, for the presence of ANAMMOX bacteria and its sustained activity in terms of Nitrogen transformations to Ammonia, Nitrite and Nitrate along with Hydrazine and Hydroxylamine.

scholarly journals Coupled anaerobic ammonium oxidation and hydrogenotrophic denitrification for simultaneous NH4-N and NO3-N removal

2018 ◽  
Vol 79 (5) ◽  
pp. 975-984 ◽  
Author(s):  
Tatsuru Kamei ◽  
Rawintra Eamrat ◽  
Kenta Shinoda ◽  
Yasuhiro Tanaka ◽  
Futaba Kazama
Keyword(s):  
Nitrogen Removal ◽  
Inorganic Nitrogen ◽  
Nitrate Removal ◽  
Fixed Bed ◽  
Anaerobic Ammonium Oxidation ◽  
Anammox Bacteria ◽  
Ammonium Oxidation ◽  
N Removal ◽  
Anammox Process

Abstract Nitrate removal during anaerobic ammonium oxidation (anammox) treatment is a concern for optimization of the anammox process. This study demonstrated the applicability and long-term stability of the coupled anammox and hydrogenotrophic denitrification (CAHD) process as an alternative method for nitrate removal. Laboratory-scale fixed bed anammox reactors (FBR) supplied with H2 to support denitrification were operated under two types of synthetic water. The FBRs showed simultaneous NH4-N and NO3-N removal, indicating that the CAHD process can support NO3-N removal during the anammox process. Intermittent H2 supply (e.g. 5 mL/min for a 1-L reactor, 14/6-min on/off cycle) helped maintain the CAHD process without deteriorating its performance under long-term operation and resulted in a nitrogen removal rate of 0.21 kg-N/m3/d and ammonium, nitrate, and dissolved inorganic nitrogen removal efficiencies of 73.4%, 80.4%, and 77%, respectively. The microbial community structure related to the CAHD process was not influenced by changes in influent water quality, and included the anammox bacteria ‘Candidatus Jettenia’ and a Sulfuritalea hydrogenivorans-like species as the dominant bacteria even after long-term reactor operation, suggesting that these bacteria are key to the CAHD process. These results indicate that the CAHD process is a promising method for enhancing the efficiency of anammox process.

Effects of Acetate on Metabolism of Anaerobic Ammonium-Oxidizing Bacteria

2014 ◽  
Vol 1073-1076 ◽  
pp. 297-300
Author(s):  
Jia Jing Sun ◽  
Lei Zhang ◽  
Luo Wang ◽  
Xiao Bo Chen
Keyword(s):  
Nitrogen Removal ◽  
Removal Rate ◽  
Anaerobic Ammonium Oxidation ◽  
Ammonium Oxidation ◽  
Organic Matters ◽  
Start Up ◽  
Anammox Process

Anaerobic ammonium oxidation (anammox) process is a heated researched biotechnology for nitrogen removal in wastewater. The application of the process is limited due to its long start-up time and sensitivity to organic matters. This paper discussed the effects of acetate on anammox process. The nitrogen removal rate of anammox process was elevated at low acetate content (1 mmol/L) and decreased at high acetate content (3 and 4 mmol/L). The ratios among NH4+-N, NO2--N and NO3--N were not related acetate content and remained at 1:1.50:0.07, but the ratios between acetate and three forms of nitrogen were acetate dependent.

Sign in / Sign up

Export Citation Format

Share Document