scholarly journals Crude Oil Sensing using Carbon Nano Structures Synthetized from Phoenix Dactylifera L. Cellulose

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Chouaib Fethiza Tedjani ◽  
Omar Ben Mya ◽  
Abdelkrim Rebiai ◽  
Abdelhamid Khachkhouche ◽  
Abdelhakim Dehbi ◽  
...  

AbstractThis study reports on the crude oil-sensing using carbon nano structures (CNSs). A mixture of CNSs was obtained by a simple method of preparation using palm cellulose ash and nitric acid as precursors, the powder was characterized by x-ray diffraction and infrared spectroscopy. The optical density of crude oil from Rhoud El-Baguel area (Southeast of Algeria) studied using UV-Vis spectroscopy, before and after adding an amount of CNSs powder to view the CNSs crude oil sensing and therefore a new method to determine the quality of crude oils and the comparison between them. Results show that CNSs prepared from palm cellulose ash have a good crystallinity and it is formed mainly from carbon nano dots (CNDs) with 4.32 Å in layers spacing and 7.4 Å in crystallite size, indicate that CNSs can be used as an excellent crude oil sensor.

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 643
Author(s):  
Xuhang Zhou ◽  
Qiulin Tan ◽  
Xiaorui Liang ◽  
Baimao Lin ◽  
Tao Guo ◽  
...  

Performing high-temperature measurements on the rotating parts of aero-engine systems requires wireless passive sensors. Surface acoustic wave (SAW) sensors can measure high temperatures wirelessly, making them ideal for extreme situations where wired sensors are not applicable. This study reports a new SAW temperature sensor based on a langasite (LGS) substrate that can perform measurements in environments with temperatures as high as 1300 °C. The Pt electrode and LGS substrate were protected by an AlN passivation layer deposited via a pulsed laser, thereby improving the crystallization quality of the Pt film, with the function and stability of the SAW device guaranteed at 1100 °C. The linear relationship between the resonant frequency and temperature is verified by various high-temperature radio-frequency (RF) tests. Changes in sample microstructure before and after high-temperature exposure are analyzed using scanning electron microscopy (SEM) and X-ray diffraction (XRD). The analysis confirms that the proposed AlN/Pt/Cr thin-film electrode has great application potential in high-temperature SAW sensors.


2012 ◽  
Vol 31 (6) ◽  
pp. 723-725 ◽  
Author(s):  
Gholamreza Nabiyouni ◽  
Parviz Boroojerdian ◽  
Kambiz Hedayati ◽  
Davood Ghanbari

AbstractLead sulfide nanoparticles were synthesized at room temperature via a simple chemical reaction. In this synthesis, 2-mercaptoethanolwas used as the capping agent and sodium sulfide was used as a sulfur source. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet-visible (UV-vis) spectroscopy and Fourier transform infrared (FT-IR) spectroscopy Electron microscopy study showed that without using a capping agent the bulk PbS is obtained, while adding the mercaptoethanol leads to production of nanoparticles. We found that the electronic absorption spectra as well as the particle sizes depend on the used capping agents. Two exitonic peaks with a large blue shift were observed when mercaptoethanol was used.


2007 ◽  
Vol 19 (1) ◽  
pp. 295
Author(s):  
K. Yotsushima ◽  
M. Shimizu ◽  
H. Kon ◽  
Y. Izaike

A simple method to evaluate the quality of in vitro-matured bovine oocytes is available for development of an in vitro embryo production system. Oocyte quality relates closely to oocyte fatty acid composition and mitochondrial distribution. The purpose of this study was to examine the influence of the quality of cumulus–oocyte complexes (COCs) and serum supplementation in IVM medium on the distribution of bovine oocyte specific gravities by sedimentation with Percoll before and after IVM. COCs were aspirated from abattoir-derived ovaries and were classified as classes A to D by the morphology of their cumulus cell layers as follows: class A, compact and more than 3 layers thick; class B, compact but <3 layers; class C, partially naked and <3 layers; and class D, naked or expanded. The classified COCs were cultured in TCM-199 supplemented with 0.1% BSA, 5 µg mL−1 insulin, 10 µg mL−1 transferrin, and 10 ng mL−1 transforming growth factor-α (M199-BITT) for 22–24 h. To evaluate the influence of serum supplementation, oocytes from classes A and B were also incubated in M199-BITT as serum-free culture or TCM-199 supplemented with 10% fetal calf serum as serum-supplemented culture. Percoll solutions were prepared by diluting Percoll with PBS supplemented with 0.3% BSA, 1 mg mL−1 glucose, and 0.2 mM sodium pyrvate to 20, 17.5, 15, 12.5, 10, 7.5, and 5% solutions. After removal of cumulus cells, denuded oocytes were put on the surface of Percoll solution for 3 min, and the precipitated oocytes were transferred to stepwise high density solution. The percent of Percoll solution just before buoyancy was considered as the oocyte specific gravity value. Statistical analysis was performed by one-way ANOVA. Oocytes from class A had the highest specific gravities before and after IVM in all classes (Table 1). After IVM, oocyte specific gravities from classes A and C were higher than those of oocytes before IVM (class A: P < 0.05, class C: P < 0.001). The specific gravities of in vitro-matured oocytes cultured in serum-free medium were higher than those cultured in serum-supplemented medium (15.3 ± 0.3%, n = 71, and 14.0 ± 0.3%, n = 58; P < 0.01). These results show that the specific gravity was affected by the morphological quality of COC, and the culture conditions for IVM may profile the metabolic activity of oocytes during IVM. Table 1.Specific gravities of the bovine oocytes classified by morphology of COC before and after IVM


Author(s):  
Muhammad A. Imam ◽  
Nitin Chopra

A new class of nano-cube core-shell heterostructures containing Ag coating on the top of WO3 was fabricated. Physical vapor deposition was used to produce WO3 based nano-heterostructures. All kind of wet toxic chemical process was avoided to make the process simple and contaminant free. Sputtering of WO3 and a subsequent thermal annealing process was done to create nano-cubes of WO3. After that, sputtering of Ag was performed to form the Ag-WO3 core-shell nano-heterostructures (CSNH). The CSNHs were characterized using field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), X-ray diffraction analysis (XRD) and UV-vis spectroscopy. The morphologies, elemental analysis, interfaces, crystallinity, phases, and chemical compositions were analyzed. The bottom-up growth of WO3 nanocubes was studied using different time periods at 900°C. Ag coating was also studied before and after annealing. Finally, an optical property (band gap) was also analyzed using Tauc plot derive from absorption spectra. The tailoring the band gap of WO3 from ~2.9eV to ~ 2.45 eV was observed while Ag-WO3 CSNH formed.


Sign in / Sign up

Export Citation Format

Share Document