scholarly journals Enhancing thermoelectric properties of single-walled carbon nanotubes using halide compounds at room temperature and above

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Bogumiła Kumanek ◽  
Grzegorz Stando ◽  
Paweł Stando ◽  
Karolina Matuszek ◽  
Karolina Z. Milowska ◽  
...  

AbstractCarbon nanotubes (CNTs) are materials with exceptional electrical, thermal, mechanical, and optical properties. Ever since it was demonstrated that they also possess interesting thermoelectric properties, they have been considered a promising solution for thermal energy harvesting. In this study, we present a simple method to enhance their performance. For this purpose, thin films obtained from high-quality single-walled CNTs (SWCNTs) were doped with a spectrum of inorganic and organic halide compounds. We studied how incorporating various halide species affects the electrical conductivity, the Seebeck coefficient, and the Power Factor. Since thermoelectric devices operate under non-ambient conditions, we also evaluated these materials' performance at elevated temperatures. Our research shows that appropriate dopant selection can result in almost fivefold improvement to the Power Factor compared to the pristine material. We also demonstrate that the chemical potential of the starting CNT network determines its properties, which is important for deciphering the true impact of chemical and physical functionalization of such ensembles.

2019 ◽  
Vol 55 (18) ◽  
pp. 2636-2639 ◽  
Author(s):  
W. Huang ◽  
F. Toshimitsu ◽  
K. Ozono ◽  
M. Matsumoto ◽  
A. Borah ◽  
...  

Flavin extraction method realized an improved power factor by easy removal of the dispersant from semiconducting SWNT sheet.


Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3808 ◽  
Author(s):  
Blazej Podlesny ◽  
Bogumila Kumanek ◽  
Angana Borah ◽  
Ryohei Yamaguchi ◽  
Tomohiro Shiraki ◽  
...  

Single-walled carbon nanotubes (SWCNTs) remain one of the most promising materials of our times. One of the goals is to implement semiconducting and metallic SWCNTs in photonics and microelectronics, respectively. In this work, we demonstrated how such materials could be obtained from the parent material by using the aqueous two-phase extraction method (ATPE) at a large scale. We also developed a dedicated process on how to harvest the SWCNTs from the polymer matrices used to form the biphasic system. The technique is beneficial as it isolates SWCNTs with high purity while simultaneously maintaining their surface intact. To validate the utility of the metallic and semiconducting SWCNTs obtained this way, we transformed them into thin free-standing films and characterized their thermoelectric properties.


2004 ◽  
Vol 126 (49) ◽  
pp. 15982-15983 ◽  
Author(s):  
Soo-Hwan Jeong ◽  
Ju-Hye Ko ◽  
Jong-Bong Park ◽  
Wanjun Park

Small ◽  
2012 ◽  
Vol 8 (13) ◽  
pp. 2045-2052 ◽  
Author(s):  
Mourad Berd ◽  
Pascal Puech ◽  
Ariete Righi ◽  
Arezki Benfdila ◽  
Marc Monthioux

2022 ◽  
Author(s):  
Shuxun Wan ◽  
Zhongming Chen ◽  
Liping Hao ◽  
Shichao Wang ◽  
Benzhang Li ◽  
...  

Abstract We present a method of constructing composites composed of conjugated polyelectrolytes (CPEs) and single-walled carbon nanotubes (SWCNTs) to obtain a high-performing flexible thermoelectric generator. In this approach, three kinds of polymers, namely, poly[(1,4-(2,5-didodecyloxybenzene)-alt-2,5-thiophene] (P1), poly[(1,4-(2,5-bis-sodium butoxysulfonate-phenylene)-alt-2,5-thiophene] (P2), and poly[(1,4-(2,5-bis-acid butoxysulfonic-phenylene)-alt-2,5-thiophene] (P3) are designed, synthesized and complexed with SWCNTs as thermoelectric composites. The electrical conductivities of CPEs/SWCNTs (P2/SWCNTs, and P3/SWCNTs) nanocomposites are much higher than those of non-CPEs/SWCNTs (P1/SWCNTs) nanocomposites. Among them, the electrical conductivity of P2/SWCNTs with a ratio of 1:4 reaches 3686 S cm-1, which is 12.4 times that of P1/SWCNTs at the same SWCNT mass ratio. Moreover, CPEs/SWCNTs composites (P2/SWCNTs) display remarkably improved thermoelectric properties with the highest power factor (PF) of 163 μW m-1 K-2. In addition, a thermoelectric generator is fabricated with P2/SWCNTs composite films, and the output power and power density of this generator reach 1.37 μW and 1.4 W m-2 (cross-section) at ΔT=70 K. This result is over three times that of the thermoelectric generator composed of non-CPEs/SWCNTs composite films (P1/SWCNTs, 0.37 μW). The remarkably improved electrical conductivities and thermoelectric properties of the CPEs/SWCNTs composites (P2/SWCNTs) are attributed to the enhanced interaction. This method for constructing CPEs/SWCNTs composites can be applied to produce thermoelectric materials and devices.


Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2720
Author(s):  
Mengdi Wang ◽  
Qin Yao ◽  
Sanyin Qu ◽  
Yanling Chen ◽  
Hui Li ◽  
...  

Single-walled carbon nanotubes (SWNTs) have been widely used as leading additives for improving the thermoelectric properties of organic materials, due to their unique structure and excellent electronic transport properties. However, the as-synthesized SWNTs are mixtures (mix-SWNT) of semiconducting (sc-SWNT) and metallic (met-SWNT) carbon nanotubes. The significantly different surface character and transport behavior of sc-SWNT and met-SWNT frequently raise the difficulty of modifying microstructures, and tuning transport properties of SWNTs/organic composites, when using mix-SWNTs as dispersion phase. Herein, we prepared high quality sc-SWNTs/rr-P3DDT composite film by presorting pure sc-SWNT from the raw mix-SWNTs using regioregular poly(3-dodecylthiophene) (rr-P3DDT). Both the smoothness and compactness of sc-SWNTs/rr-P3DDT are great improved, as compared with the mix-SWNTs/rr-P3DDT films, and the sc-SWNTs are well-dispersed and uniformly wrapped by rr-P3DDT with diameter less than 50 nm. The significantly enhanced Seebeck coefficients and power factors are obtained in the sc-SWNT/rr-P3DDT samples. As the result, the maximum power factor of 60 μW/mK2 in 50 wt% sc-SWNTs sample is 70% higher than that of mix-SWNTs/P3DDT sample. This work reveals the effectiveness of pure semiconductor SWNTs as fillers to optimize the thermoelectric properties of CNT/polymer nano-composites.


Materials ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 3567 ◽  
Author(s):  
Bogumiła Kumanek ◽  
Grzegorz Stando ◽  
Paweł S. Wróbel ◽  
Dawid Janas

Carbon nanotubes have been intensively researched for many years because of a wide array of promising properties that they have. In this paper, we present the impact of synthesis parameters on thermoelectric properties of nanocarbon material. We conducted a number of syntheses of multi-walled carbon nanotubes (MWCNTs) at different temperatures (800 and 900 °C) using various amounts of catalyst (2%, 5.5%, and 9.6%) to facilitate the process. We also tested the influence of injection rate of precursor and the necessity of material purification on thermoelectric properties of MWCNTs. The electrical conductivity, thermal conductivity, and Seebeck coefficient were measurement for all samples. Based on these parameters, the values of Power Factor and Figure of Merit were calculated. The results show that the most important parameter in the context of thermoelectric properties is purity of employed MWCNTs. To obtain appropriate material for this purpose optimum synthesis temperature and appropriate content of the catalyst must be selected. The study also reveals that post-synthetic purification of nanocarbon is essential to produce an attractive material for thermoelectrics.


2018 ◽  
Vol 60 (12) ◽  
pp. 2649-2655 ◽  
Author(s):  
I. A. Tambasov ◽  
A. S. Voronin ◽  
N. P. Evsevskaya ◽  
M. N. Volochaev ◽  
Yu. V. Fadeev ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document