scholarly journals Wide range and highly linear signal processed systematic humidity sensor array using Methylene Blue and Graphene composite

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Muhammad Umair Khan ◽  
Gul Hassan ◽  
Rayyan Ali Shaukat ◽  
Qazi Muhammad Saqib ◽  
Mahesh Y. Chougale ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Linear Combination ◽  
Linear Function ◽  
Humidity Sensor ◽  
Sensor Array ◽  
Combination Method ◽  
Humidity Sensing ◽  
Sensing Applications ◽  
Wide Range ◽  
Graphene Flakes

AbstractThis paper proposes a signal processed systematic 3 × 3 humidity sensor array with all range and highly linear humidity response based on different particles size composite inks and different interspaces of interdigital electrodes (IDEs). The fabricated sensors are patterned through a commercial inkjet printer and the composite of Methylene Blue and Graphene with three different particle sizes of bulk Graphene Flakes (BGF), Graphene Flakes (GF), and Graphene Quantum Dots (GQD), which are employed as an active layer using spin coating technique on three types of IDEs with different interspaces of 300, 200, and 100 µm. All range linear function (0–100% RH) is achieved by applying the linear combination method of nine sensors in the signal processing field, where weights for linear combination are required, which are estimated by the least square solution. The humidity sensing array shows a fast response time (Tres) of 0.2 s and recovery time (Trec) of 0.4 s. From the results, the proposed humidity sensor array opens a new gateway for a wide range of humidity sensing applications with a linear function.

scholarly journals Inkjet-Printed Wide Range and Highly Linear Signal Processed Systematic Humidity Sensor Array Based on Methylene Blue and Graphene Nanocomposite

2020 ◽  
Author(s):  
Muhammad Umair Khan ◽  
Gul Hassan ◽  
Rayyan Ali Shaukat ◽  
Qazi Muhammad Saqib ◽  
Mahesh Chougale ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Linear Combination ◽  
Linear Function ◽  
Humidity Sensor ◽  
Sensor Array ◽  
Combination Method ◽  
Humidity Sensing ◽  
Sensing Applications ◽  
Wide Range ◽  
Graphene Flakes

Abstract This paper proposes a signal processed systematic humidity sensor 3×3 array with all range and highly linear humidity response based on different particle size nanocomposite inks and different interspaces of interdigital electrodes (IDEs) (300, 200, and 100 µm). The fabricated sensors are patterned through a commercial inkjet printer by utilizing nanocomposites of methylene blue and graphene with three different particle sizes of bulk Graphene Flakes (BGF), Graphene Flakes (GF), and Graphene Quantum Dots (GQD), which are employed as an active layer on three types of IDEs with different interspaces of 300, 200, and 100 µm. From 3×3 sensor array, all range linear function (0-100% RH) is achieved by applying linear combination method of nine sensors in signal processing field, where weights for linear combination are required, which are estimated by the least square solution. The humidity sensing array shows a fast response time (Tres) of 0.2 sec and recovery time (Trec) of 0.4 sec. From the results, the proposed humidity sensor array opens a new gateway for a wide range of humidity sensing applications with a linear function.

A miniaturized evanescent mode HMSIW humidity sensor

2017 ◽  
Vol 10 (1) ◽  
pp. 87-91 ◽  
Author(s):  
Chang-Ming Chen ◽  
Jun Xu
Keyword(s):  
Humidity Sensor ◽  
Split Ring Resonator ◽  
Evanescent Mode ◽  
Split Ring ◽  
Promising Candidate ◽  
Humidity Sensing ◽  
Complementary Split Ring Resonator ◽  
Sensing Applications ◽  
Sensing Material ◽  
Compact Size

A passive evanescent mode half-mode substrate integrated waveguide (HMSIW) resonator loaded with a complementary split ring resonator (CSRR) is designed and fabricated for humidity sensing applications. The use of the CSRR which is etched on the top plane of the HMSIW can significantly reduce the size of the device. Without any sensing material, the sensor which has a compact size of 0.17λg × 0.17λg can provide high humidity sensitivity up to 5.82 MHz/%relative humidity (RH) at high RH region (>84.3%). The results indicate that the proposed structure is a promising candidate for radio and microwave humidity sensing applications.

An intrinsically stretchable humidity sensor based on anti-drying, self-healing and transparent organohydrogels

2019 ◽  
Vol 6 (3) ◽  
pp. 595-603 ◽  
Author(s):  
Jin Wu ◽  
Zixuan Wu ◽  
Huihua Xu ◽  
Qian Wu ◽  
Chuan Liu ◽  
...  
Keyword(s):  
Humidity Sensor ◽  
Self Healing ◽  
Solvent Exchange ◽  
Humidity Sensing ◽  
Sensing Applications

A facile solvent-exchange strategy is devised to fabricate anti-drying, self-healing and transparent organohydrogels for stretchable humidity sensing applications.

scholarly journals Multi-modal, ultrasensitive, wide-range humidity sensing with Ti3C2 film

Nanoscale ◽  
2018 ◽  
Vol 10 (46) ◽  
pp. 21689-21695 ◽  
Author(s):  
Eric S. Muckley ◽  
Michael Naguib ◽  
Ilia N. Ivanov
Keyword(s):  
Water Vapor ◽  
Detection Limit ◽  
Humidity Sensor ◽  
Humidity Sensing ◽  
Wide Range

MXene (Ti3C2)-based humidity sensor demonstrates exceptional sensitivity to water vapor from 0.1%–95% RH with <20 mTorr H2O detection limit.

scholarly journals A Compact Double-Folded Substrate Integrated Waveguide Re-Entrant Cavity for Highly Sensitive Humidity Sensing

Sensors ◽  
2019 ◽  
Vol 19 (15) ◽  
pp. 3308 ◽  
Author(s):  
Zhihua Wei ◽  
Jie Huang ◽  
Jing Li ◽  
Junshan Li ◽  
Xuyang Liu ◽  
...  
Keyword(s):  
Humidity Sensor ◽  
High Sensitivity ◽  
Substrate Integrated Waveguide ◽  
Humidity Sensing ◽  
Food Industries ◽  
High Q ◽  
Sensing Applications ◽  
Compact Size ◽  
Highly Sensitive ◽  
Humidity Chamber

In this study, an ultra-compact humidity sensor based on a double-folded substrate integrated waveguide (SIW) re-entrant cavity was proposed and analyzed. By folding a circular re-entrant cavity twice along its two orthogonally symmetric planes, the designed structure achieved a remarkable size reduction (up to 85.9%) in comparison with a conventional TM010-mode circular SIW cavity. The operating principle of the humidity sensor is based on the resonant method, in other words, it utilizes the resonant properties of the sensor as signatures to detect the humidity condition of the ambient environment. To this end, a mathematical model quantitatively relating the resonant frequency of the sensor and the relative humidity (RH) level was established according to the cavity perturbation theory. The sensing performance of the sensor was experimentally validated in a RH range of 30%–80% by using a humidity chamber. The measured absolute sensitivity of the sensor was calculated to be 135.6 kHz/%RH, and the corresponding normalized sensitivity was 0.00627%/%RH. It was demonstrated that our proposed sensor not only has the merits of compact size and high sensitivity, but also benefits from a high Q-factor and ease of fabrication and integration. These advantages make it an excellent candidate for humidity sensing applications in various fields such as the agricultural, pharmaceutical, and food industries.

All printed wide range humidity sensor array combining MoSe2 and PVOH in series

2020 ◽  
Vol 31 (10) ◽  
pp. 7683-7697 ◽  
Author(s):  
Muhammad Umair Khan ◽  
Muhammad Awais ◽  
Tahseen Elahi Chattha ◽  
Arshad Hassan ◽  
Jinho Bae
Keyword(s):  
Humidity Sensor ◽  
Sensor Array ◽  
Wide Range ◽  
In Series

scholarly journals Strain Sensor via Wood Anomalies in 2D Dielectric Array

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 1022
Author(s):  
Rashid G. Bikbaev ◽  
Ivan V. Timofeev ◽  
Vasiliy F. Shabanov
Keyword(s):  
Higher Plants ◽  
Numerical Study ◽  
Reciprocal Lattice ◽  
Strain Sensing ◽  
Photonic Materials ◽  
Sensing Applications ◽  
Wide Range ◽  
Sensor Structure ◽  
Optical Behavior ◽  
Chlorophyll Absorption

Optical sensing is one of many promising applications for all-dielectric photonic materials. Herein, we present an analytical and numerical study on the strain-responsive spectral properties of a bioinspired sensor. The sensor structure contains a two-dimensional periodic array of dielectric nanodisks to mimic the optical behavior of grana lamellae inside chloroplasts. To accumulate a noticeable response, we exploit the collective optical mode in grana ensemble. In higher plants, such a mode appears as Wood’s anomaly near the chlorophyll absorption line to control the photosynthesis rate. The resonance is shown persistent against moderate biological disorder and deformation. Under the stretching or compression of a symmetric structure, the mode splits into a couple of polarized modes. The frequency difference is accurately detected. It depends on the stretch coefficient almost linearly providing easy calibration of the strain-sensing device. The sensitivity of the considered structure remains at 5 nm/% in a wide range of strain. The influence of the stretching coefficient on the length of the reciprocal lattice vectors, as well as on the angle between them, is taken into account. This adaptive phenomenon is suggested for sensing applications in biomimetic optical nanomaterials.

scholarly journals Femtosecond Laser Fabrication of Hybrid Metal-Dielectric Structures with Nonlinear Photoluminescence

Photonics ◽  
2021 ◽  
Vol 8 (4) ◽  
pp. 121
Author(s):  
Ekaterina Ponkratova ◽  
Eduard Ageev ◽  
Filipp Komissarenko ◽  
Sergei Koromyslov ◽  
Dmitry Kudryashov ◽  
...  
Keyword(s):  
Visible Spectral Region ◽  
Single Step ◽  
Hybrid Nanostructures ◽  
Nonlinear Properties ◽  
Nanophotonic Devices ◽  
Sensing Applications ◽  
Structure Morphology ◽  
Wide Range ◽  
Nonlinear Signal ◽  
Dielectric Structures

Fabrication of hybrid micro- and nanostructures with a strong nonlinear response is challenging and represents a great interest due to a wide range of photonic applications. Usually, such structures are produced by quite complicated and time-consuming techniques. This work demonstrates laser-induced hybrid metal-dielectric structures with strong nonlinear properties obtained by a single-step fabrication process. We determine the influence of several incident femtosecond pulses on the Au/Si bi-layer film on produced structure morphology. The created hybrid systems represent isolated nanoparticles with a height of 250–500 nm exceeding the total thickness of the Au-Si bi-layer. It is shown that fabricated hybrid nanostructures demonstrate enhancement of the SHG signal (up to two orders of magnitude) compared to the initial planar sample and a broadband photoluminescence signal (more than 200 nm in width) in the visible spectral region. We establish the correlation between nonlinear signal and phase composition provided by Raman scattering measurements. Such laser-induced structures have significant potential in optical sensing applications and can be used as components for different nanophotonic devices.

scholarly journals A Nanoplasmonic-Based Biosensing Approach for Wide-Range and Highly Sensitive Detection of Chemicals

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1961
Author(s):  
Francesco Arcadio ◽  
Luigi Zeni ◽  
Aldo Minardo ◽  
Caterina Eramo ◽  
Stefania Di Di Ronza ◽  
...  
Keyword(s):  
Optical Fibers ◽  
Limit Of Detection ◽  
Slab Waveguide ◽  
Grating Pattern ◽  
Transparent Substrate ◽  
Synthetic Receptor ◽  
Sensing Applications ◽  
Wide Range ◽  
Plastic Optical Fibers ◽  
Highly Sensitive Detection

In a specific biosensing application, a nanoplasmonic sensor chip has been tested by an experimental setup based on an aluminum holder and two plastic optical fibers used to illuminate and collect the transmitted light. The studied plasmonic probe is based on gold nanograting, realized on the top of a Poly(methyl methacrylate) (PMMA) chip. The PMMA substrate could be considered as a transparent substrate and, in such a way, it has been already used in previous work. Alternatively, here it is regarded as a slab waveguide. In particular, we have deposited upon the slab surface, covered with a nanograting, a synthetic receptor specific for bovine serum albumin (BSA), to test the proposed biosensing approach. Exploiting this different experimental configuration, we have determined how the orientation of the nanostripes forming the grating pattern, with respect to the direction of the input light (longitudinal or orthogonal), influences the biosensing performances. For example, the best limit of detection (LOD) in the BSA detection that has been obtained is equal to 23 pM. Specifically, the longitudinal configuration is characterized by two observable plasmonic phenomena, each sensitive to a different BSA concentration range, ranging from pM to µM. This aspect plays a key role in several biochemical sensing applications, where a wide working range is required.

Sign in / Sign up

Export Citation Format

Share Document