Friction-induced uniaxial orientation of a liquid crystalline N‐substituted polypyrrole

2000 ◽  
Vol 10 (7) ◽  
pp. 1509-1510 ◽  
Author(s):  
Shota Abe ◽  
Masashi Kijima ◽  
Hideki Shirakawa
Keyword(s):  
Liquid Crystalline ◽  
Uniaxial Orientation

Rheological properties and associated structural characteristics of some aromatic polycondensates including liquid-crystalline polyesters and cellulose derivatives (IUPAC Technical Report)

2004 ◽  
Vol 76 (11) ◽  
pp. 2027-2049 ◽  
Author(s):  
J. L. White ◽  
L. Dong ◽  
P. Han ◽  
H. M. Laun
Keyword(s):  
Shear Flow ◽  
Rheological Properties ◽  
Liquid Crystalline ◽  
Structural Characteristics ◽  
Cellulose Derivatives ◽  
Extrudate Swell ◽  
Polymer Liquid Crystals ◽  
Uniaxial Orientation ◽  
Technical Report ◽  
Thermotropic Polymer

A comparative experimental study of shear-flow rheological properties of thermotropic polymer liquid crystals by eight different laboratories is described. The materials involved four different liquid-crystalline polyesters (LCPs), a glass- fiber-filled liquid-crystalline polyester,hydroxypropyl cellulose (HPC), and two non-liquid-crystalline high-temperature polymers, a poly(etheretherketone) (PEEK), and a polyarylate (PAR). Studies were made in both steady shear-flow and dynamic oscillatory experiments. The data from the various laboratories involved were compared. The level of agreement in the data was much less for most liquid-crystalline polymers than for similar isotropic melts. The Cox –Merz rule is valid for PEEK and PAR, but not for the LCPs and HPC. The occurrence of low levels of extrudate swell and high levels of uniaxial orientation in extrudates of the LCPs and HPC is described.

Freeze fracture imaging and computer simulation of liposome structure: Membrane geometry and defects

1983 ◽  
Vol 41 ◽  
pp. 646-647
Author(s):  
Joseph A. Zasadzinski
Keyword(s):  
Liquid Crystalline ◽  
Freeze Fracture ◽  
Continuum Theory ◽  
Closed Surfaces ◽  
Straight Line ◽  
Low Weight ◽  
Concentric Spheres ◽  
Membrane Geometry ◽  
Dupin Cyclides ◽  
Limiting Case

At low weight fractions, many surfactant and biological amphiphiles form dispersions of lamellar liquid crystalline liposomes in water. Amphiphile molecules tend to align themselves in parallel bilayers which are free to bend. Bilayers must form closed surfaces to separate hydrophobic and hydrophilic domains completely. Continuum theory of liquid crystals requires that the constant spacing of bilayer surfaces be maintained except at singularities of no more than line extent. Maxwell demonstrated that only two types of closed surfaces can satisfy this constraint: concentric spheres and Dupin cyclides. Dupin cyclides (Figure 1) are parallel closed surfaces which have a conjugate ellipse (r1) and hyperbola (r2) as singularities in the bilayer spacing. Any straight line drawn from a point on the ellipse to a point on the hyperbola is normal to every surface it intersects (broken lines in Figure 1). A simple example, and limiting case, is a family of concentric tori (Figure 1b).To distinguish between the allowable arrangements, freeze fracture TEM micrographs of representative biological (L-α phosphotidylcholine: L-α PC) and surfactant (sodium heptylnonyl benzenesulfonate: SHBS)liposomes are compared to mathematically derived sections of Dupin cyclides and concentric spheres.

Electron microscopy of crystalline structure in thermotropic random copolymers

1991 ◽  
Vol 49 ◽  
pp. 1054-1055
Author(s):  
Afzana Anwer ◽  
S. Eilidh Bedford ◽  
Richard J. Spontak ◽  
Alan H. Windle
Keyword(s):  
Electron Microscopy ◽  
Crystalline Structure ◽  
Liquid Crystalline ◽  
Elevated Temperatures ◽  
Random Copolymers ◽  
Molecular Characteristics ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Identical Monomer ◽  
Periodic Layer

Random copolyesters composed of wholly aromatic monomers such as p-oxybenzoate (B) and 2,6-oxynaphthoate (N) are known to exhibit liquid crystalline characteristics at elevated temperatures and over a broad composition range. Previous studies employing techniques such as X-ray diffractometry (XRD) and differential scanning calorimetry (DSC) have conclusively proven that these thermotropic copolymers can possess a significant crystalline fraction, depending on molecular characteristics and processing history, despite the fact that the copolymer chains possess random intramolecular sequencing. Consequently, the nature of the crystalline structure that develops when these materials are processed in their mesophases and subsequently annealed has recently received considerable attention. A model that has been consistent with all experimental observations involves the Non-Periodic Layer (NPL) crystallite, which occurs when identical monomer sequences enter into register between adjacent chains. The objective of this work is to employ electron microscopy to identify and characterize these crystallites.

Structure-property relations of liquid crystalline polymers

1987 ◽  
Vol 45 ◽  
pp. 460-463
Author(s):  
Linda C. Sawyer
Keyword(s):  
Solid State ◽  
Liquid Crystalline ◽  
Structural Model ◽  
Crystalline Polymer ◽  
Liquid Crystalline Polymers ◽  
Mechanical Anisotropy ◽  
Structure Property ◽  
Preparation Methods ◽  
Crystalline Polymers ◽  
Extended Chain

Recent liquid crystalline polymer (LCP) research has sought to define structure-property relationships of these complex new materials. The two major types of LCPs, thermotropic and lyotropic LCPs, both exhibit effects of process history on the microstructure frozen into the solid state. The high mechanical anisotropy of the molecules favors formation of complex structures. Microscopy has been used to develop an understanding of these microstructures and to describe them in a fundamental structural model. Preparation methods used include microtomy, etching, fracture and sonication for study by optical and electron microscopy techniques, which have been described for polymers. The model accounts for the macrostructures and microstructures observed in highly oriented fibers and films.Rod-like liquid crystalline polymers produce oriented materials because they have extended chain structures in the solid state. These polymers have found application as high modulus fibers and films with unique properties due to the formation of ordered solutions (lyotropic) or melts (thermotropic) which transform easily into highly oriented, extended chain structures in the solid state.

Liquid crystalline ordering of paired helical filaments in neurofibrillary tangles of Alzheimer's disease

1986 ◽  
Vol 44 ◽  
pp. 348-349
Author(s):  
D.F. Clapin ◽  
V.J.A. Montpetit
Keyword(s):  
Alzheimer’S Disease ◽  
Alzheimer's Disease ◽  
Neurofibrillary Tangles ◽  
Liquid Crystalline ◽  
Amyloid Fibrils ◽  
Geometric Analysis ◽  
Paired Helical Filaments ◽  
Microscopic Level ◽  
Light Microscopic Level ◽  
Regular Spacing

Alzheimer's disease is characterized by the accumulation of abnormal filamentous proteins. The most important of these are amyloid fibrils and paired helical filaments (PHF). PHF are located intraneuronally forming bundles called neurofibrillary tangles. The designation of these structures as "tangles" is appropriate at the light microscopic level. However, localized domains within individual tangles appear to demonstrate a regular spacing which may indicate a liquid crystalline phase. The purpose of this paper is to present a statistical geometric analysis of PHF packing.

Use of light microscopy in the qualitative and quantitative study of liquid crystalline order

1992 ◽  
Vol 50 (1) ◽  
pp. 264-265
Author(s):  
Christopher Viney
Keyword(s):  
Light Microscopy ◽  
Liquid Crystalline ◽  
Structural Characteristics ◽  
Molecular Order ◽  
Liquid Crystalline Phases ◽  
Convenient Technique ◽  
Liquid Crystalline Materials ◽  
Transparent Windows

Light microscopy is a convenient technique for characterizing molecular order in fluid liquid crystalline materials. Microstructures can usually be observed under the actual conditions that promote the formation of liquid crystalline phases, whether or not a solvent is required, and at temperatures that can range from the boiling point of nitrogen to 600°C. It is relatively easy to produce specimens that are sufficiently thin and flat, simply by confining a droplet between glass cover slides. Specimens do not need to be conducting, and they do not have to be maintained in a vacuum. Drybox or other controlled environmental conditions can be maintained in a sealed chamber equipped with transparent windows; some heating/ freezing stages can be used for this purpose. It is relatively easy to construct a modified stage so that the generation and relaxation of global molecular order can be observed while specimens are being sheared, simulating flow conditions that exist during processing. Also, light only rarely affects the chemical composition or molecular weight distribution of the sample. Because little or no processing is required after collecting the sample, one can be confident that biologically derived materials will reveal many of their in vivo structural characteristics, even though microscopy is performed in vitro.

Factors affecting microstructural scale in liquid crystalline polymers

1990 ◽  
Vol 48 (4) ◽  
pp. 220-221
Author(s):  
Christine M. Dannels ◽  
Christopher Viney
Keyword(s):  
Liquid Crystalline ◽  
Liquid Crystalline Polymers ◽  
Factors Affecting ◽  
Crystalline Polymers ◽  
Thermal Expansion Coefficients ◽  
Low Thermal Expansion ◽  
Lower Viscosity ◽  
Fine Microstructure ◽  
Planar Orientation ◽  
Strength And Stiffness

Processing polymers from the liquid crystalline state offers several advantages compared to processing from conventional fluids. These include: better axial strength and stiffness in fibers, better planar orientation in films, lower viscosity during processing, low solidification shrinkage of injection moldings (thermotropic processing), and low thermal expansion coefficients. However, the compressive strength of the solid is disappointing. Previous efforts to improve this property have focussed on synthesizing stiffer molecules. The effect of microstructural scale has been overlooked, even though its relevance to the mechanical and physical properties of more traditional materials is well established. By analogy with the behavior of metals and ceramics, one would expect a fine microstructure (i..e. a high density of orientational defects) to be desirable.Also, because much microstructural detail in liquid crystalline polymers occurs on a scale close to the wavelength of light, light is scattered on passing through these materials.

Sign in / Sign up

Export Citation Format

Share Document