High Stokes shift perylene dyes for luminescent solar concentrators

2013 ◽  
Vol 49 (16) ◽  
pp. 1618 ◽  
Author(s):  
Alessandro Sanguineti ◽  
Mauro Sassi ◽  
Riccardo Turrisi ◽  
Riccardo Ruffo ◽  
Gianfranco Vaccaro ◽  
...  
Energies ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 451 ◽  
Author(s):  
Ana Frias ◽  
Marita Cardoso ◽  
Ana Bastos ◽  
Sandra Correia ◽  
Paulo André ◽  
...  

The integration of photovoltaic (PV) elements in urban environments is gaining visibility due to the current interest in developing energetically self-sustainable buildings. Luminescent solar concentrators (LSCs) may be seen as a solution to convert urban elements, such as façades and windows, into energy-generation units for zero-energy buildings. Moreover, LSCs are able to reduce the mismatch between the AM1.5G spectrum and the PV cells absorption. In this work, we report optically active coatings for LSCs based on lanthanide ions (Ln3+ = Eu3+, Tb3+)-doped surface functionalized ionosilicas (ISs) embedded in poly(methyl methacrylate) (PMMA). These new visible-emitting films exhibit large Stokes-shift, enabling the production of transparent coatings with negligible self-absorption and large molar extinction coefficient and brightness values (~2 × 105 and ~104 M−1∙cm−1, respectively) analogous to that of orange/red-emitting organic dyes. LSCs showed great potential for efficient and environmentally resistant devices, with optical conversion efficiency values of ~0.27% and ~0.34%, respectively.


2019 ◽  
Vol 55 (21) ◽  
pp. 3160-3163 ◽  
Author(s):  
Paolo Della Sala ◽  
Nunzio Buccheri ◽  
Alessandro Sanzone ◽  
Mauro Sassi ◽  
Placido Neri ◽  
...  

The use of [n]CPP derivatives as luminophores in LSC-devices minimises reabsorption losses.


2018 ◽  
Vol 8 (1) ◽  
Author(s):  
Chenchen Yang ◽  
Jun Zhang ◽  
Wei-Tao Peng ◽  
Wei Sheng ◽  
Dianyi Liu ◽  
...  

2014 ◽  
Vol 8 (5) ◽  
pp. 392-399 ◽  
Author(s):  
Francesco Meinardi ◽  
Annalisa Colombo ◽  
Kirill A. Velizhanin ◽  
Roberto Simonutti ◽  
Monica Lorenzon ◽  
...  

Nanoscale ◽  
2020 ◽  
Vol 12 (46) ◽  
pp. 23537-23545
Author(s):  
Hsiu-Ying Huang ◽  
Maria Jessabel Talite ◽  
Kun-Bin Cai ◽  
Ruth Jeane Soebroto ◽  
Sheng-Hsiung Chang ◽  
...  

Solar energy can be harvested using luminescent solar concentrators (LSCs) incorporated with edge-mounted solar cells without sacrificing their see-through visibility, thus facilitating the development of solar windows.


Author(s):  
Haiguang Zhao ◽  
Guiju Liu ◽  
Shujie You ◽  
Franco V. A. Camargo ◽  
Margherita Zavelani-Rossi ◽  
...  

Highly efficient large-area luminescent solar concentrators (LSCs) were demonstrated using colloidal C-dots. The large-area LSC (225 cm2) exhibited an external optical efficiency of 2.2% (under natural sun irradiation, 60 mW cm−2).


2019 ◽  
Author(s):  
Guanpeng Lyu ◽  
James Kendall ◽  
Ilaria Meazzini ◽  
Eduard Preis ◽  
Sebnem Baysec ◽  
...  

<div><div><div><p>Luminescent solar concentrators (LSCs) are solar-harvesting devices fabricated from transparent waveguide that is doped or coated with lumophores. Despite their potential for architectural integration, the optical efficiency of LSCs is often limited by incomplete harvesting of solar radiation and aggregation-caused quenching (ACQ) of lumophores in the solid state. Here, we demonstrate a multi-lumophore LSC design which circumvents these challenges through a combination of non-radiative Förster energy transfer (FRET) and aggregation-induced emission (AIE). The LSC incorporates a green-emitting poly(tetraphenylethylene), p-O-TPE, as an energy donor and a red-emitting perylene bisimide molecular dye (PDI-Sil) as the energy acceptor, within an organic-inorganic hybrid di-ureasil waveguide. Steady-state photoluminescence studies demonstrate that the di-ureasil host induced AIE from the p-O-PTE donor polymer, leading to a high photoluminescence quantum yield (PLQY) of ~45% and a large Stokes shift of ~150 nm. Covalent grafting of the PDI-Sil acceptor to the siliceous domains of the di-ureasil waveguide also inhibits non-radiative losses by preventing molecular aggregation. Due to the excellent spectral overlap, FRET was shown to occur from p-O-TPE to PDI-Sil, which increased with acceptor concentration. As a result, the final LSC (4.5 cm x 4.5 cm x 0.3 cm) with an optimised donor- acceptor ratio (1:1 by wt%) exhibited an internal photon efficiency of 20%, demonstrating a viable design for LSCs utilising an AIE-based FRET approach to improve the solar-harvesting performance.</p></div></div></div>


2019 ◽  
Author(s):  
Guanpeng Lyu ◽  
James Kendall ◽  
Eduard Preis ◽  
Sebnem Baysec ◽  
Ullrich Scherf ◽  
...  

<div><div><div><p>Luminescent solar concentrators (LSCs) are solar-harvesting devices fabricated from transparent waveguide that is doped or coated with lumophores. Despite their potential for architectural integration, the optical efficiency of LSCs is often limited by incomplete harvesting of solar radiation and aggregation-caused quenching (ACQ) of lumophores in the solid state. Here, we demonstrate a multi-lumophore LSC design which circumvents these challenges through a combination of non-radiative Förster energy transfer (FRET) and aggregation-induced emission (AIE). The LSC incorporates a green-emitting poly(tetraphenylethylene), p-O-TPE, as an energy donor and a red-emitting perylene bisimide molecular dye (PDI-Sil) as the energy acceptor, within an organic-inorganic hybrid di-ureasil waveguide. Steady-state photoluminescence studies demonstrate that the di-ureasil host induced AIE from the p-O-PTE donor polymer, leading to a high photoluminescence quantum yield (PLQY) of ~45% and a large Stokes shift of ~150 nm. Covalent grafting of the PDI-Sil acceptor to the siliceous domains of the di-ureasil waveguide also inhibits non-radiative losses by preventing molecular aggregation. Due to the excellent spectral overlap, FRET was shown to occur from p-O-TPE to PDI-Sil, which increased with acceptor concentration. As a result, the final LSC (4.5 cm x 4.5 cm x 0.3 cm) with an optimised donor- acceptor ratio (1:1 by wt%) exhibited an internal photon efficiency of 20%, demonstrating a viable design for LSCs utilising an AIE-based FRET approach to improve the solar-harvesting performance.</p></div></div></div>


2019 ◽  
Author(s):  
Guanpeng Lyu ◽  
James Kendall ◽  
Ilaria Meazzini ◽  
Eduard Preis ◽  
Sebnem Baysec ◽  
...  

<div><div><div><p>Luminescent solar concentrators (LSCs) are solar-harvesting devices fabricated from transparent waveguide that is doped or coated with lumophores. Despite their potential for architectural integration, the optical efficiency of LSCs is often limited by incomplete harvesting of solar radiation and aggregation-caused quenching (ACQ) of lumophores in the solid state. Here, we demonstrate a multi-lumophore LSC design which circumvents these challenges through a combination of non-radiative Förster energy transfer (FRET) and aggregation-induced emission (AIE). The LSC incorporates a green-emitting poly(tetraphenylethylene), p-O-TPE, as an energy donor and a red-emitting perylene bisimide molecular dye (PDI-Sil) as the energy acceptor, within an organic-inorganic hybrid di-ureasil waveguide. Steady-state photoluminescence studies demonstrate that the di-ureasil host induced AIE from the p-O-PTE donor polymer, leading to a high photoluminescence quantum yield (PLQY) of ~45% and a large Stokes shift of ~150 nm. Covalent grafting of the PDI-Sil acceptor to the siliceous domains of the di-ureasil waveguide also inhibits non-radiative losses by preventing molecular aggregation. Due to the excellent spectral overlap, FRET was shown to occur from p-O-TPE to PDI-Sil, which increased with acceptor concentration. As a result, the final LSC (4.5 cm x 4.5 cm x 0.3 cm) with an optimised donor- acceptor ratio (1:1 by wt%) exhibited an internal photon efficiency of 20%, demonstrating a viable design for LSCs utilising an AIE-based FRET approach to improve the solar-harvesting performance.</p></div></div></div>


Sign in / Sign up

Export Citation Format

Share Document