scholarly journals A large area (70 cm2) monolithic perovskite solar module with a high efficiency and stability

2016 ◽  
Vol 9 (12) ◽  
pp. 3687-3692 ◽  
Author(s):  
Anish Priyadarshi ◽  
Lew Jia Haur ◽  
Paul Murray ◽  
Dongchuan Fu ◽  
Sneha Kulkarni ◽  
...  
Keyword(s):  
High Efficiency ◽  
Low Cost ◽  
Active Area ◽  
Large Area ◽  
Solar Module ◽  
Processing Methods ◽  
Module 10

A large area and highly stable perovskite solar module (10 cm × 10 cm, active area ∼70 cm2) is demonstrated using low cost processing methods and materials.

Research Progresses on High Efficiency Amorphous and Microcrystalline Silicon-Based Thin Film Solar Cells

2010 ◽  
Vol 1245 ◽  
Author(s):  
Xinhua Geng ◽  
Ying Zhao ◽  
Xiandan Zhang ◽  
Guofu Hou ◽  
Huizhi Ren ◽  
...  
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
High Efficiency ◽  
Low Cost ◽  
Cell Structure ◽  
Thin Film Solar Cells ◽  
Chamber System ◽  
Large Area ◽  
Solar Module ◽  
Single Chamber

AbstractThis paper reviews our research progresses of hydrogenated amorphous silicon (a-Si:H) and microcrystalline (μc-Si:H) based thin film solar cells. It coves the three areas of high efficiency, low cost process, and large-area proto-type multi-chamber system design and solar module deposition. With an innovative VHF power profiling technique, we have effectively controlled the crystalline evolution and made uniform μc-Si:H materials along the growth direction, which was used as the intrinsic layers of pin solar cells. We attained a 9.36% efficiency with a μc-Si:H single-junction cell structure. We have successfully resolved the cross-contamination issue in a single-chamber system and demonstrated the feasibility of using single-chamber process for manufacturing. We designed and built a large-area multi-chamber VHF system, which is used for depositing a-Si:H/μc-Si:H micromorph tandem modules on 0.79-m2 glass substrates. Preliminary module efficiency has exceeded 8%.

scholarly journals Advanced Multilayer Composite Heavy-Oxide Scintillator Detectors for High Efficiency Fast Neutron Detection

2018 ◽  
Vol 170 ◽  
pp. 07010 ◽  
Author(s):  
Vladimir D. Ryzhikov ◽  
Sergei V. Naydenov ◽  
Thierry Pochet ◽  
Gennadiy M. Onyshchenko ◽  
Leonid A. Piven ◽  
...  
Keyword(s):  
Fast Neutron ◽  
Count Rate ◽  
High Efficiency ◽  
Low Cost ◽  
Neutron Detection ◽  
Multilayer Composite ◽  
Large Area ◽  
Transparent Plastic ◽  
Fast Neutron Detection ◽  
Scintillator Detectors

We have developed and evaluated a new approach to fast neutron and neutron-gamma detection based on large-area multilayer composite heterogeneous detection media consisting of dispersed granules of small-crystalline scintillators contained in a transparent organic (plastic) matrix. Layers of the composite material are alternated with layers of transparent plastic scintillator material serving as light guides. The resulting detection medium – designated as ZEBRA – serves as both an active neutron converter and a detection scintillator which is designed to detect both neutrons and gamma-quanta. The composite layers of the ZEBRA detector consist of small heavy-oxide scintillators in the form of granules of crystalline BGO, GSO, ZWO, PWO and other materials. We have produced and tested the ZEBRA detector of sizes 100x100x41 mm and greater, and determined that they have very high efficiency of fast neutron detection (up to 49% or greater), comparable to that which can be achieved by large sized heavy-oxide single crystals of about Ø40x80 cm3 volume. We have also studied the sensitivity variation to fast neutron detection by using different types of multilayer ZEBRA detectors of 100 cm2 surface area and 41 mm thickness (with a detector weight of about 1 kg) and found it to be comparable to the sensitivity of a 3He-detector representing a total cross-section of about 2000 cm2 (with a weight of detector, including its plastic moderator, of about 120 kg). The measured count rate in response to a fast neutron source of 252Cf at 2 m for the ZEBRA-GSO detector of size 100x100x41 mm3 was 2.84 cps/ng, and this count rate can be doubled by increasing the detector height (and area) up to 200x100 mm2. In summary, the ZEBRA detectors represent a new type of high efficiency and low cost solid-state neutron detector that can be used for stationary neutron/gamma portals. They may represent an interesting alternative to expensive, bulky gas counters based on 3He or 10B neutron detection technologies.

New low-cost high-efficiency solar module: diffracting deflector module

2012 ◽  
Author(s):  
V. Gâté ◽  
Y. Jourlin ◽  
M. Langlet ◽  
F. Vocanson ◽  
O. Parriaux ◽  
...  
Keyword(s):  
High Efficiency ◽  
Low Cost ◽  
Solar Module

High Efficiency High Stable Large Area Perovskite Solar Module Including 2D Strategy and Polymeric Hole Transport Material

2021 ◽  
Author(s):  
Narges Yaghoobi Nia ◽  
Mahmoud Zendehdel ◽  
Barbara Paci ◽  
Amanda Generosi ◽  
Zhaoxiang Zheng ◽  
...  
Keyword(s):  
High Efficiency ◽  
Hole Transport ◽  
Large Area ◽  
Solar Module

Rapid Fabrication of Large-Area SiO2 Nanoparticle Monolayer Films Via Water-Induced Interfacial Assembly

2014 ◽  
Vol 528 ◽  
pp. 112-117
Author(s):  
Chao Rong Li ◽  
Hu Yang ◽  
Juan Li
Keyword(s):  
Self Assembly ◽  
High Efficiency ◽  
Low Cost ◽  
Kinetic Mechanism ◽  
Mixed System ◽  
Universal Method ◽  
Nanoparticle Dispersion ◽  
Large Area ◽  
Monolayer Films ◽  
Interfacial Assembly

Water/toluene interfacial self-assembly of nanostructures is a powerful bottom-up approach for film fabrication because of the low cost and high efficiency, and it is a simple and universal method for almost all low-dimensional nanostructures. The method involved adding alcohol and then toluene (here the dispersant was itself alcohol, only toluene was added) into SiO2 nanoparticle dispersion, and then a large quantity of distilled water was rapidly poured into the mixed system. Simultaneously, nanoparticles in the dispersion were extracted to the water/toluene interface, forming a thin film with a nearly perfect hexagonal close packed phase. Large-area nanoparticle monolayer films (e.g., more than 20 cm2) could be prepared in less than 1 min. The close-packed structures of these thin films were verified by a field emission scanning electron microscopy (FESEM, Hitachi S-4800, Japan). We also investigated the whole process of forming the films and found out the mechanism of water-induced interfacial assembly. As for the specific kinetic mechanism of the fabrication process, it is expected to further study in later time.

Liquid Metal Printing for Manufacturing Large-Scale Flexible Electronic Circuits

2014 ◽  
Author(s):  
Yi Zheng ◽  
Zhi-Zhu He ◽  
Jun Yang ◽  
Jing Liu
Keyword(s):  
Liquid Metal ◽  
Large Scale ◽  
High Efficiency ◽  
Printed Electronics ◽  
Low Cost ◽  
Treatment Temperature ◽  
Consumer Electronics ◽  
Plastic Substrate ◽  
Electronic Circuits ◽  
Large Area

The advancement of printed electronics technology has significantly facilitated the development of electronic engineering. However, so far there still remain big barriers to impede the currently available printing technologies from being extensively used. Many of the difficulties came from the factors like: complicated ink-configurations, high post-treatment temperature, poor conductivity in room temperature and extremely high cost and time consuming fabrication process. From an alternative strategy, our recently invented desktop liquid metal printer offered a flexible way to better address the above deficiencies. Through modifying the system developed in the authors’ lab, here we demonstrated the feasibility of the method in quickly and reliably printing out various large area electronic circuits. Particularly, the liquid metal ink made of GaIn24.5 alloy, with a high electrical resistivity of 2.98×10−7 Ω·m, can be rapidly printed on polyvinyl chloride (PVC) substrate with maximum sizes spanning from centimeter size to meter large. Most important of all, all these manufactures were achieved at an extremely low cost level which clearly shows the ubiquitous value of the liquid metal printer. To evaluate the working performance of the present electronics fabrication method, the electrical resistance and wire width of the printed circuits were investigated under multiple overprinting cycles. For practical illustration purpose, LED lighting conductive patterns which can serve as a functional electronic decoration art were fabricated on the flexible plastic substrate. The present work sets up an example for directly making large-scale ending consumer electronics via a high-efficiency and low-cost way.

scholarly journals A study on problem diagnosis and maintenance guideline of small scale PV system

2018 ◽  
Vol 7 (2.12) ◽  
pp. 105
Author(s):  
Hee Chul Kim
Keyword(s):  
Power Generation ◽  
Monitoring System ◽  
High Efficiency ◽  
Low Cost ◽  
Monitoring Device ◽  
Cloud Type ◽  
Pv System ◽  
Solar Module ◽  
Iot Platform ◽  
Smoke Sensor

Background/Objectives: Research and development of low-cost, high-efficiency devices that can be installed without replacing existing power generation equipment is promoted early. It is aimed to prevent the damage of property and human life by detecting the fire of PV system. Therefore, it is possible to easily install the device without replacing the solar module The aim is to minimize the damage to people.Methods/Statistical analysis: In order to prepare for the safety accidents of the photovoltaic power generation facilities due to fire and blast, the monitoring system should have the following functions as essential. Measures and analyzes the voltage and current of power generated in each string in the connection board in real time. An alarm is triggered when an abnormality of a specific string is detected or when an abnormal temperature change is detected in the connection panel internal temperature sensor.If the smoke sensor inside the connection panel detects smoke generation and an abnormality such as a fire is caught, the monitoring system immediately generates an alarm.Findings: It provides services such as checking the status of customer power plants, improving power generation efficiency, and recovering quickly in case of a disaster through a monitoring system that supports stable operation of the PV plant and profit generation. By using the existing connection box function as it is, the company minimized the additional cost, and promoted and promoted a low-cost, high-efficiency system.Improvements/Applications: H/W module using temperature and smoke sensor is interlocked with existing connection semi-control system to develop efficient connection monitoring device. In order to link the sensor value with the monitoring system, messages are added and supplemented. For the application of the fail-safe solution, we developed a monitoring device to prevent the escape of the solar module and developed the H / W module using the vibration and loosening sensor. We will develop the solar monitoring system based on cloud type IoT platform by linking the fault recognition and alarm generation function by adding / supplementing the sensor value to link with the monitoring system.As a power station management for cloud type (ASP) service, adoption of oneM2M standard based IoT platform can expand acceptance by monitoring web and mobile based monitoring as well as real time monitoring and fault monitoring of solar power plant.  

CdTe Thin-Film Solar Cells

MRS Bulletin ◽  
1993 ◽  
Vol 18 (10) ◽  
pp. 45-47 ◽  
Author(s):  
T. Suntola
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Cadmium Telluride ◽  
High Efficiency ◽  
Low Cost ◽  
Thick Layer ◽  
Thin Film Solar Cells ◽  
Cdte Thin Film ◽  
Large Area ◽  
Cell Structures

Cadmium telluride is currently the most promising material for high efficiency, low-cost thin-film solar cells. Cadmium telluride is a compound semiconductor with an ideal 1.45 eV bandgap for direct light-to-electricity conversion. The light absorption coefficient of CdTe is high enough to make a one-micrometer-thick layer of material absorb over 99% of the visible light. Processing homogenous polycrystalline thin films seems to be less critical for CdTe than for many other compound semiconductors. The best small-area CdTe thin-film cells manufactured show more than 15% conversion efficiency. Large-area modules with aperture efficiencies in excess of 10% have also been demonstrated. The long-term stability of CdTe solar cell structures is not known in detail or in the necessary time span. Indication of good stability has been demonstrated. One of the concerns about CdTe solar cells is the presence of cadmium which is an environmentally hazardous material.

Large-Area, Low-Cost, High-Efficiency Neutron Detector for Vehicle-Mounted Operation

2017 ◽  
Vol 64 (7) ◽  
pp. 1696-1703 ◽  
Author(s):  
Jeffrey L. Lacy ◽  
Christopher S. Martin ◽  
Athanasios Athanasiades ◽  
Murari Regmi ◽  
Gerson J. Vazquez-Flores ◽  
...  
Keyword(s):  
Neutron Detector ◽  
High Efficiency ◽  
Low Cost ◽  
Large Area
Sign in / Sign up

Export Citation Format

Share Document