Synthesis and characterization of Co3O4 nanocube-doped polyaniline nanocomposites with enhanced methyl orange adsorption from aqueous solution

RSC Advances ◽  
2016 ◽  
Vol 6 (49) ◽  
pp. 43388-43400 ◽  
Author(s):  
Syed Shahabuddin ◽  
Norazilawati Muhamad Sarih ◽  
Sharifah Mohamad ◽  
Siti Nor Atika Baharin

Co3O4 nanocube polyaniline nanocomposites have been successfully synthesised. They show enhanced surface properties and a greater adsorption capacity to remove MO efficiently within a short duration of time.

RSC Advances ◽  
2016 ◽  
Vol 6 (2) ◽  
pp. 1627-1636 ◽  
Author(s):  
Nathalie Sleiman ◽  
Véronique Deluchat ◽  
Mahmoud Wazne ◽  
Alexandra Courtin ◽  
Zeinab Saad ◽  
...  

Synthesis and characterization of iron oxidation byproducts, in different experimental conditions (aging and dissolved oxygen concentration); study of their phosphate adsorption capacity.


2020 ◽  
Vol 18 (1) ◽  
pp. 843-849
Author(s):  
Mirza Nadeem Ahmad ◽  
Arif Hussain ◽  
Muhammad Naveed Anjum ◽  
Tajamal Hussain ◽  
Adnan Mujahid ◽  
...  

AbstractChitosan was grafted with polyorthoethylaniline through oxidative polymerization using ammonium persulfate as oxidant, resulting in the formation of a biocomposite of chitosan-grafted-polyorthoethylaniline (CH-g-POEA). The synthesized biocomposite (CH-g-POEA) was characterized by FTIR, SEM, and TGA. Adsorption of methyl orange (MO) dye by CH-g-POEA was studied, wherein the Langmuir isotherm model with a R2 of 0.9979 and adsorption capacity of 45.7 mg/g was evaluated.


2016 ◽  
Vol 1133 ◽  
pp. 547-551 ◽  
Author(s):  
Ali E.I. Elkhalifah ◽  
Mohammad Azmi Bustam ◽  
Azmi Mohd Shariff ◽  
Sami Ullah ◽  
Nadia Riaz ◽  
...  

The present work aims at a better understanding of the influences of the intercalated mono-, di- and triethanolamines on the characteristics and CO2 adsorption ability of sodium form of bentonite (Na-bentonite). The results revealed that the molar mass of intercalated amines significantly influenced the structural and surface properties as well as the CO2 adsorption capacity of Na-bentonite. In this respect, a stepwise increase in the d-spacing of Na-bentonite with the molar mass of amine was recorded by XRD technique. However, an inverse effect of the molar mass of amine on the surface area was confirmed by BET method. CO2 adsorption experiments on amine-bentonite hybrid adsorbents showed that the CO2 adsorption capacity inversly related to the molar mass of amine at 25 ͦC and 101 kPa. Accordingly, Na-bentonite modified by monoethanolammonium cations adsorbed as high as 0.475 mmol CO2/g compared to 0.148 and 0.087 mmol CO2/g for that one treated with di- and triethanolammonium cations, respectively.


2019 ◽  
Vol 276 ◽  
pp. 570-576 ◽  
Author(s):  
Hugo H.C. Lima ◽  
Rogério S. Maniezzo ◽  
Maria E.G. Llop ◽  
Vincente L. Kupfer ◽  
Pedro A. Arroyo ◽  
...  

2009 ◽  
Vol 2 (1) ◽  
pp. 35-41 ◽  
Author(s):  
Fatemeh F. Bamoharram ◽  
Majid M. Heravi ◽  
Mina Roushani ◽  
Maryam R. Toosi ◽  
Ladan Jodeyre

2019 ◽  
Vol 7 (2) ◽  
pp. 240-246
Author(s):  
Kaur Harpreet ◽  
Kaur Harpreet ◽  
Vandana Kamboj ◽  
Vandana Kamboj

Water is the most crucial thing to mankind and so its contamination by various agencies is posing a threat to the natural balance. So, in the present work, the efficiency of various adsorbents derived from plant waste, to remove different dyes from aqueous solution was evaluated. Parameters for study were contact time, concentration and pH. Various combinations of plant ashes were used for the study. It was found that adsorbent prepared from the combination of orange peels, pomegranate and banana peels ashes, exhibited good adsorption capacity for methylene blue, congo red and crystal violet. All these dyes were completely removed from the aqueous solution while methyl orange was not removed. Congo red was removed completely within 40 min of contact with the adsorbent while methyl orange took 3 hrs to be removed to the extent of 48% only. The adsorption coefficient of congo red was found to be 2.33 while value for methylene blue and crystal violet was 1 and 1.66 respectively. The characterization of adsorbent was done by Scanning Electron Microscopy and IR spectroscopy. SEM image revealed the surface of adsorbent to be made of differential pores. From the results it became evident that the low-cost adsorbent could be used as a replacement for costly traditional methods of removing colorants from water.


Sign in / Sign up

Export Citation Format

Share Document