Nickel oxide aerogel for high performance supercapacitor electrodes

RSC Advances ◽  
2016 ◽  
Vol 6 (113) ◽  
pp. 112620-112624 ◽  
Author(s):  
Zhiyi Zhang ◽  
Qiuyue Gao ◽  
Haibo Gao ◽  
Zhenyu Shi ◽  
Junwei Wu ◽  
...  

Monolithic NiO aerogels were prepared by a facile citric acid assisted sol–gel method for supercapacitor electrodes.

2015 ◽  
Vol 740 ◽  
pp. 3-6
Author(s):  
Guo Yuan Cheng ◽  
Xing Hua Fu ◽  
Xin Jin ◽  
Wen Hong Tao ◽  
Yu Qin Qiang

KNN-BF piezoelectric ceramics synthesized by sol-gel method in this experiment. By controlling bismuth and iron content in the system to study effects of them. We selected citric acid as metal chelator and ethylene glycol as esterification agent. PH maintained 5-6 during preparation of the sol. Sintering temperature of ceramic selected 1100°C. Preparation ceramics under these conditions and comparative analysis, the structure of ceramics is single perovskite and shap of crystals are square block. With the increase of x, properties of ceramics firstly increases and then decreases: d33, εr, Qm, Kpreaching the maximum, values of them were 136pC/N, 630(f =1KHz), 212, 0.41 respectively; dielectric loss to minimum is 0.07(f =1KHz); at this point, ceramics had best performance.


1995 ◽  
Author(s):  
Takeshi Miki ◽  
Kazuki Yoshimura ◽  
Yutaka Tai ◽  
Masato Tazawa ◽  
Ping Jin ◽  
...  

2021 ◽  
Vol 93 (3) ◽  
pp. 30401
Author(s):  
Jiaxing Wang ◽  
Hai Yu ◽  
Yong Zhang

SnO2 nanoparticle architectures were successfully synthesized using a sol-gel method and developed for acetone gas detection. The morphology and structure of the particles were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The SnO2 nanoparticle architectures were configured as high-performance sensors to detect acetone and showed a very fast response time (<1 s), a short recovery time (10 s), good repeatability and high selectivity at a relatively low working temperature. Thus, SnO2 nanoparticles should be promising candidates for designing and fabricating acetone gas sensors with good gas sensing performance. The possible gas sensing mechanism is also presented.


2019 ◽  
Vol 43 (19) ◽  
pp. 7441-7456 ◽  
Author(s):  
P. E. Saranya ◽  
S. Selladurai

In the present study, pristine NiO- and Ce (0.5, 1.0, 1.5, and 2%)-doped NiO nanoflakes were synthesised using the sol–gel method for supercapacitor applications.


RSC Advances ◽  
2017 ◽  
Vol 7 (12) ◽  
pp. 7140-7149 ◽  
Author(s):  
Yuchao Xu ◽  
Zongzhang Liu ◽  
Zheng Han ◽  
Minhua Zhang

High performance and stability of a ZnO/ZrO2–SiO2 catalyst prepared via a sol–gel method in ethanol and acetaldehyde conversion into 1,3-butadiene process.


2014 ◽  
Vol 91 ◽  
pp. 19-23
Author(s):  
Plamen Pashev ◽  
Rositsa Raykova ◽  
Yancho Hristov ◽  
Bogdan Bogdanov

The study presented deal with preparation of batches of the system Y-Ba-Cu-O using sol-gel method and citric acid as precursor. Batches with particle size of 100 nm containing each of the phases Y123 and Y211 were prepared. The stoichiometric amounts of Y, Ba and Cu oxides were dissolved in 65% HNO3 until clear blue solution was observed under heating to 80 ̊С. The nitrate solutions obtained were neutralized to pH = 6 with 25% solution of NH3 (p.a.), then С6Н8О7 was added as the gels obtained were thermally treated. The transformation processes taking place under change of temperature were studied by IR, XRD, DTA and SEM.


2018 ◽  
Vol 85 (3) ◽  
pp. 520-528
Author(s):  
Xiajun Dong ◽  
Shanshan Jiang ◽  
Shahid Khan ◽  
Zhizheng Wu ◽  
Jianxun Wang ◽  
...  

2020 ◽  
Vol 44 (23) ◽  
pp. 9813-9821
Author(s):  
H. Issaoui ◽  
A. Benali ◽  
M. Bejar ◽  
E. Dhahri ◽  
R. F. Santos ◽  
...  

Perovskite (La0.8Ca0.2)1−xBixFeO3 compounds were synthesized by sol–gel method using the citric acid route and sintered at 800 °C and 900 °C. LCBFO 800 series has the smallest size of crystallites, a larger magnetization and a smaller Curie temperature.


Sign in / Sign up

Export Citation Format

Share Document