Photocatalytic degradation of tetracycline in aqueous systems under visible light irridiation using needle-like SnO2 nanoparticles anchored on exfoliated g-C3N4

Background Pharmaceuticals is one of the groups of contaminants of emerging concern that are resistant to decomposition or removal by most of the existing water and wastewater treatment procedures, hence the need to develop techniques to facilitate the removals of this group of organic contaminants from water systems. In this study, needle-like SnO2 nanoparticles was synthesised and loaded on exfoliated g-C3N4 nanosheet through a hydrothermal method, for use as sensitive visible light induce-photocatalyst for the decomposition of tetracycline in aqueous systems. The synthesised composites was characterized and analysed for the nature of the heterojunction between the SnO2 nanoparticle and g-C3N4 nanosheet using microscopic and spectroscopic techniques. Results The composites were of improved surface properties and enhanced visible-light absorption. The synthesised SnO2/g-C3N4 nanocomposites with various amounts of SnO2 (10–50 mg), employed in the degradation of tetracycline under visible light irradiation, were of good degradation efficiency. The degradation efficiencies of tetracycline by 1 wt.%, 2 wt.%, 3 wt.% and 5 wt.% SnO2/g-C3N4 photocatalyst were 81.54%, 90.57%, 95.90% and 92.15% as compared to g-C3N4 and SnO2 with 40.92% and 51.32% degradation efficiencies. The synergistic interaction between the needle-like SnO2 and exfoliated g-C3N4 nanosheet promoted the separation of photogenerated electron holes pairs, which enhanced their migration rate between SnO2 and g-C3N4 heterojunction, thereby facilitating the degradation of tetracycline. The ·O2− was noted to be the major reactive species in the photocatalytic of the 3 wt.% SnO2/g-C3N4 nanocomposite. Conclusion The fabricated SnO2 nanoparticles anchored on exfoliated g-C3N4 showed good performance for the decomposition of tetracycline in water, with possible application on other pharmaceuticals having same moiety (similar chemical structures).

Varying electrical and dielectric properties of Ni:SnO2 films by MWCNTs and GNPs coating

In this research, pure SnO2 and Ni-doped SnO2 (Ni:SnO2) nanocomposite films were produced by chemical bath deposition method and the latter were coated with multi-walled carbon nanotubes (Ni:SnO2/MWCNTs) or graphene nanoplatelets (Ni:SnO2/GNPs) by spin coating. All samples have tetragonal rutile SnO2 structure with the presence of carbon (002) peak in MWCNTs- or GNPs-coated films. Crystallite size of SnO2 films decreased remarkably with Ni doping followed by a slight decrease with MWCNTs coating and slight increase with GNPs coating. Scanning electron microscope images manifested a dispersed agglomerative nature of SnO2 nanoparticles which reduced especially with MWCNTs coating due to the porous surface provided by carbon nanotubes. From the photoluminescence measurements, oxygen defects-related peaks were spotted in the SnO2-based structures with different luminescence intensities. The most significant decrease in resistance was observed with the addition of GNPs into Ni-doped SnO2 nanocomposites compared to the other produced films mainly due to the synergetic effect that promotes excellent charge transfer between surfaces of Ni:SnO2 and graphene nanosheet. The huge increase in conductivity of GNPs-coated films led to a huge increase in dielectric losses and this followed by a drop down of dielectric constant of the GNPs-coated films.

Oxygen Vacancies Enable Excellent Electrochemical Kinetics of Carbon Coated Mesoporous SnO2 Nanoparticles in Lithium Ion Battery

Herein, we report the synthesis, characterization and electrochemical performance of carbon coated mesoporous SnO2 nanoparticles (NPs) prepared by adopting a simple hydrothermal process. BET analysis shows that the SnO2 formed...

Tuning the Photocatalytic Activity of Tin Oxide Through Mechanical Surface Activation

Tin oxide (SnO2) nanoparticles were synthesized by the co-precipitation method and mechanically modified by high-energy ball milling. The experimental results demonstrate that the collision with zirconia balls produces slight changes in the crystalline, electronic, morphological, and surface properties of SnO2, which lead to an increase in the redox potential of the energy level and the formation of the hydroxyl group on the SnO2 surface. Moreover, these changes are intensified over the milling up to 90 min, directly affecting the photocatalytic performance, which was monitored by the rate of rhodamine B (RhB) degradation driven by ultraviolet (UV) irradiation. As a result, all ground samples showed better photocatalytic activity than pristine SnO2 (Sn-cop). The maximum degradation of rhodamine B was ca. 75%, achieved with 90 min-milled SnO2 nanoparticles (Sn-M90), compared to the Sn-cop sample induced a 1.67 times higher degradation rate. The reaction mechanism suggests that its better photocatalytic activity may be associated with the higher increased redox potential of the valence and conduction bands and the formation of hydroxyl active sites on the catalyst surface principal oxidizing agent generated. Therefore, we conclude that the ball milling process is an efficient way to induce stable activation of oxide metal for photocatalytic applications.

Hydrophilic and Conductive Carbon Nanotube Fibers for High-Performance Lithium-Ion Batteries

Carbon nanotube fiber (CNTF) is a highly conductive and porous platform to grow active materials of lithium-ion batteries (LIB). Here, we prepared SnO2@CNTF based on sulfonic acid-functionalized CNTF to be used in LIB anodes without binder, conductive agent, and current collector. The SnO2 nanoparticles were grown on the CNTF in an aqueous system without a hydrothermal method. The functionalized CNTF exhibited higher conductivity and effective water infiltration compared to the raw CNTF. Due to the enhanced water infiltration, the functionalized CNTF became SnO2@CNTF with an ideal core–shell structure coated with a thin SnO2 layer. The specific capacity and rate capability of SnO2@-functionalized CNTF were superior to those of SnO2@raw CNTF. Since the SnO2@CNTF-based anode was free of a binder, conductive agent, and current collector, the specific capacity of the anode studied in this work was higher than that of conventional anodes.

Assembling Ultrafine SnO2 Nanoparticles on MIL-101(Cr) Octahedrons for Efficient Fuel Photocatalytic Denitrification

Effectively reducing the concentration of nitrogen-containing compounds (NCCs) remains a significant but challenging task in environmental restoration. In this work, a novel step-scheme (S-scheme) SnO2@MCr heterojunction was successfully fabricated via a facile hydrothermal method. At this heterojunction, MIL-101(Cr) octahedrons are decorated with highly dispersed SnO2 quantum dots (QDs, approximate size 3 nm). The QDs are evenly wrapped around the MIL-101(Cr), forming an intriguing zero-dimensional/three-dimensional (0D/3D) S-scheme heterostructure. Under simulated sunlight irradiation (280 nm < λ < 980 nm), SnO2@MCr demonstrated superior photoactivity toward the denitrification of pyridine, a typical NCC. The adsorption capacity and adsorption site of SnO2@MCr were also investigated. Tests using 20%SnO2@MCr exhibited much higher activity than that of pure SnO2 and MIL-101(Cr); the reduction ratio of Cr(VI) is rapidly increased to 95% after sunlight irradiation for 4 h. The improvement in the photocatalytic activity is attributed to (i) the high dispersion of SnO2 QDs, (ii) the binding of the rich adsorption sites with pyridine molecules, and (iii) the formation of the S-scheme heterojunction between SnO2 and MIL-101(Cr). Finally, the photocatalytic mechanism of pyridine was elucidated, and the possible intermediate products and degradation pathways were discussed.