Single-electrode triboelectric nanogenerators based on sponge-like porous PTFE thin films for mechanical energy harvesting and self-powered electronics

2017 ◽  
Vol 5 (24) ◽  
pp. 12252-12257 ◽  
Author(s):  
Meng Wang ◽  
Nan Zhang ◽  
Yingjie Tang ◽  
Heng Zhang ◽  
Chuan Ning ◽  
...  
Keyword(s):  
Thin Films ◽  
Energy Harvesting ◽  
Mechanical Energy ◽  
Triboelectric Nanogenerator ◽  
Self Powered ◽  
Triboelectric Nanogenerators

A single-electrode triboelectric nanogenerator (S-TENG) based on sponge-like porous polytetrafluoroethylene (PTFE) thin films was developed.

Flexible Triboelectric Nanogenerator Based on Polyester Conductive Cloth for Biomechanical Energy Harvesting and Self-Powered Sensors

Nanoscale ◽  
2021 ◽  
Author(s):  
Junwei Zhao ◽  
Yujiang Wang ◽  
Xiaojiang Song ◽  
Anqi Zhou ◽  
Yunfei Ma ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Mechanical Energy ◽  
Low Frequency ◽  
Triboelectric Nanogenerator ◽  
Self Powered

As a new nanotechnology of mechanical energy harvesting and self-powered sensing, triboelectric nanogenerator (TENG) has been explored as a new path of using various low-frequency disordered mechanical energies in the...

Triboelectric nanogenerators as new energy technology and self-powered sensors – Principles, problems and perspectives

2014 ◽  
Vol 176 ◽  
pp. 447-458 ◽  
Author(s):  
Zhong Lin Wang
Keyword(s):  
Energy Harvesting ◽  
Charge Density ◽  
Energy Conversion ◽  
Daily Life ◽  
Mechanical Energy ◽  
Ocean Waves ◽  
Human Motion ◽  
Triboelectric Nanogenerator ◽  
Standard Material ◽  
Self Powered

Triboelectrification is one of the most common effects in our daily life, but it is usually taken as a negative effect with very limited positive applications. Here, we invented a triboelectric nanogenerator (TENG) based on organic materials that is used to convert mechanical energy into electricity. The TENG is based on the conjunction of triboelectrification and electrostatic induction, and it utilizes the most common materials available in our daily life, such as papers, fabrics, PTFE, PDMS, Al, PVCetc.In this short review, we first introduce the four most fundamental modes of TENG, based on which a range of applications have been demonstrated. The area power density reaches 1200 W m−2, volume density reaches 490 kW m−3, and an energy conversion efficiency of ∼50–85% has been demonstrated. The TENG can be applied to harvest all kinds of mechanical energy that is available in our daily life, such as human motion, walking, vibration, mechanical triggering, rotation energy, wind, a moving automobile, flowing water, rain drops, tide and ocean waves. Therefore, it is a new paradigm for energy harvesting. Furthermore, TENG can be a sensor that directly converts a mechanical triggering into a self-generated electric signal for detection of motion, vibration, mechanical stimuli, physical touching, and biological movement. After a summary of TENG for micro-scale energy harvesting, mega-scale energy harvesting, and self-powered systems, we will present a set of questions that need to be discussed and explored for applications of the TENG. Lastly, since the energy conversion efficiencies for each mode can be different although the materials are the same, depending on the triggering conditions and design geometry. But one common factor that determines the performance of all the TENGs is the charge density on the two surfaces, the saturation value of which may independent of the triggering configurations of the TENG. Therefore, the triboelectric charge density or the relative charge density in reference to a standard material (such as polytetrafluoroethylene (PTFE)) can be taken as a measuring matrix for characterizing the performance of the material for the TENG.

Harvesting Energy of Body Motion Through Single Electrode Based Self-Powered Triboelectric Nanogenerator

2019 ◽  
Vol 14 (11) ◽  
pp. 1572-1581 ◽  
Author(s):  
Shamsuddin ◽  
Saeed Ahmed Khan ◽  
Ahmed Ali ◽  
Abdul Qadir Rahimoon ◽  
Palwasha Jalalzai
Keyword(s):  
Energy Harvesting ◽  
Human Skin ◽  
Mechanical Energy ◽  
Short Circuit ◽  
Copper Acetate ◽  
Body Motion ◽  
Triboelectric Nanogenerator ◽  
Wearable Electronics ◽  
Silicon Rubber ◽  
Self Powered

A self-powered mechanical energy harvesting system consists of the storage system and the energy scavenging TENG. Triboelectric nanogenerator includes a system which integrates a self-powered sensor and the power generator, this triboelectric nanogenerator has the potential to be used in a modern wearable electronic TENG. It has been reported that triboelectric nanogenerator working under complicated deformation like bending, stretching and twisting brings the main problem. Here we have fabricated the shape adaptive Triboelectric nanogenerator which solves all the deformation issues and can harvest the mechanical energy through human body motion in any deformation, the fabricated TENG is a self-powered sensor which can sense the different human activities and can monitor the health issues, the TENG stores the energy directly to the capacitor for powering the wearable electronics. A human skin based triboelectric nanogenerator was designed from the silicon rubber and the copper acetate-II used as the electrode, which makes the TENG flexible self-powered sensor, it can be stretched up to 200%. The stretchable nature and the flexibility of the human skin based silicon rubber triboelectric nanogenerator makes it the promising flexible and shape-adaptive energy harvesting TENG. The fabricated TENG generated the open circuit voltage 70 V and the short circuit current 11 μA and delivered the power 55 μW at the load of 80 MΩ. 42 LEDs were powered directly from the TENG. The fabricated TENG has human skin tactile property which does not harm the human skin while using it multiple times. The layer of copper acetate is completely coated with silicone rubber. The fabricated TENG is flexible, biocompatible and cost effective.

scholarly journals Triboelectric nanogenerator based on Teflon/vitamin B1 powder for self-powered humidity sensing

2020 ◽  
Vol 11 ◽  
pp. 1394-1401
Author(s):  
Liangyi Zhang ◽  
Huan Li ◽  
Yiyuan Xie ◽  
Jing Guo ◽  
Zhiyuan Zhu
Keyword(s):  
Relative Humidity ◽  
Mechanical Energy ◽  
Vitamin B1 ◽  
Cost Effective ◽  
Electrical Energy ◽  
Open Circuit ◽  
Triboelectric Nanogenerator ◽  
Cost Effective Method ◽  
Self Powered ◽  
Triboelectric Nanogenerators

Recently, there has been growing interest in triboelectric nanogenerators (TENGs) that can effectively convert various forms of mechanical energy input into electrical energy. In the present study, a novel Teflon/vitamin B1 powder based triboelectric nanogenerator (TVB-TENG) is proposed. Paper is utilized as a supporting platform for triboelectrification between a commercial Teflon tape and vitamin B1 powder. The measured open-circuit voltage was approximately 340 V. The TVB-TENG can be applied as a humidity sensor and exhibits a linear and reversible response to the relative humidity of the environment. Moreover, the change in relative humidity is also indicated by the change in luminosity of a set of light-emitting diodes (LEDs) integrated in the TVB-TENG system. The TVB-TENG proposed in this study illustrates a cost-effective method for portable power supply and sensing devices.

scholarly journals Ultra-stretchable and healable hydrogel-based triboelectric nanogenerators for energy harvesting and self-powered sensing

RSC Advances ◽  
2021 ◽  
Vol 11 (28) ◽  
pp. 17437-17444
Author(s):  
Guoxia Li ◽  
Longwei Li ◽  
Panpan Zhang ◽  
Caiyun Chang ◽  
Fan Xu ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Energy Harvesting ◽  
Mechanical Energy ◽  
Self Healing ◽  
Self Powered ◽  
Triboelectric Nanogenerators ◽  
Physical Crosslinking

An ultra-stretchable and self-healing hydrogel is developed with graphene oxide and Laponite as collaborative physical crosslinking points, which is utilized in triboelectric nanogenerators for mechanical energy harvesting and self-powered sensing.

scholarly journals Triboelectric Energy Harvesting Response of Different Polymer-Based Materials

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4980
Author(s):  
Tiago Rodrigues-Marinho ◽  
Nelson Castro ◽  
Vitor Correia ◽  
Pedro Costa ◽  
Senentxu Lanceros-Méndez
Keyword(s):  
Energy Harvesting ◽  
Output Power ◽  
Polyvinylidene Fluoride ◽  
Light Emission ◽  
Mechanical Energy ◽  
Harvesting Systems ◽  
Self Powered ◽  
Triboelectric Nanogenerators ◽  
Vertical Contact ◽  
The Internet Of Things

Energy harvesting systems for low-power devices are increasingly being a requirement within the context of the Internet of Things and, in particular, for self-powered sensors in remote or inaccessible locations. Triboelectric nanogenerators are a suitable approach for harvesting environmental mechanical energy otherwise wasted in nature. This work reports on the evaluation of the output power of different polymer and polymer composites, by using the triboelectric contact-separation systems (10 N of force followed by 5 cm of separation per cycle). Different materials were used as positive (Mica, polyamide (PA66) and styrene/ethylene-butadiene/styrene (SEBS)) and negative (polyvinylidene fluoride (PVDF), polyurethane (PU), polypropylene (PP) and Kapton) charge materials. The obtained output power ranges from 0.2 to 5.9 mW, depending on the pair of materials, for an active area of 46.4 cm2. The highest response was obtained for Mica with PVDF composites with 30 wt.% of barium titanate (BT) and PA66 with PU pairs. A simple application has been developed based on vertical contact-separation mode, able to power up light emission diodes (LEDs) with around 30 cycles to charge a capacitor. Further, the capacitor can be charged in one triboelectric cycle if an area of 0.14 m2 is used.

scholarly journals Walking energy harvesting and self-powered tracking system based on triboelectric nanogenerators

2020 ◽  
Vol 11 ◽  
pp. 1590-1595
Author(s):  
Mingliang Yao ◽  
Guangzhong Xie ◽  
Qichen Gong ◽  
Yuanjie Su
Keyword(s):  
Energy Consumption ◽  
Energy Harvesting ◽  
Smart Cities ◽  
Tracking System ◽  
Mechanical Energy ◽  
Short Circuit ◽  
Triboelectric Nanogenerator ◽  
Low Carbon ◽  
Public Areas ◽  
Self Powered

Due to the extensive energy consumption and high population density in modern cities, the collection and use of scattered walking energy from the stream of people is crucial for the development of a green ecological city. Herein, a flexible undulated electrode-based triboelectric nanogenerator (u-TENG) was integrated to the floor to scavenge walking energy from pedestrians, promoting the ordered collection of disordered and scattered energy. Driven by the steps of human walking, the output of the as-fabricated u-TENG are an open-circuit voltage of 86 V and a short-circuit current of 6.2 μA, which are able to continuously light up 110 light-emitting diode bulbs. In addition, a self-powered location-tracking system was prepared for pedestrian volume counting and passenger tracing with the purpose of reducing energy consumption in public areas. The proposed walking energy harvesting device is flexible, feasible, and unaffected by season, climate, or location. This work not only proposes a strategy for mechanical energy harvesting in public areas, including subway stations, hospitals, shopping malls, and business streets, but also offers a novel solution for smart cities and low-carbon transportation alternatives.

Sign in / Sign up

Export Citation Format

Share Document