Multilayer-graphene-stabilized lithium deposition for anode-Free lithium-metal batteries

Nanoscale ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 2710-2720 ◽  
Author(s):  
Addisu Alemayehu Assegie ◽  
Cheng-Chu Chung ◽  
Meng-Che Tsai ◽  
Wei-Nien Su ◽  
Chun-Wei Chen ◽  
...  

Ultra-thin multilayer graphene film domain grown on Cu by chemical vapor deposition enables dendrite free lithium deposition in an anode-free Li metal battery via distributing localized current.

RSC Advances ◽  
2015 ◽  
Vol 5 (109) ◽  
pp. 90111-90120 ◽  
Author(s):  
Atul Bisht ◽  
S. Chockalingam ◽  
O. S. Panwar ◽  
A. K. Kesarwani ◽  
B. P. Singh ◽  
...  

Catalyst assisted carbon nanotubes (CNTs) were grown on multilayer graphene (MLG) on copper and silicon substrates by the microwave plasma enhanced chemical vapor deposition technique.


2020 ◽  
Vol 15 (1) ◽  
Author(s):  
Tao Han ◽  
Hongxia Liu ◽  
Shulong Wang ◽  
Shupeng Chen ◽  
Kun Yang

AbstractThe Van der Waals (vdWs) hetero-structures consist of two-dimensional materials have received extensive attention, which is due to its attractive electrical and optoelectronic properties. In this paper, the high-quality large-size graphene film was first prepared by the chemical vapor deposition (CVD) method; then, graphene film was transferred to SiO2/Si substrate; next, the graphene/WS2 and graphene/MoS2 hetero-structures were prepared by the atmospheric pressure chemical vapor deposition method, which can be achieved by directly growing WS2 and MoS2 material on graphene/SiO2/Si substrate. Finally, the test characterization of graphene/TMDs hetero-structures was performed by AFM, SEM, EDX, Raman and PL spectroscopy to obtain and grasp the morphology and luminescence laws. The test results show that graphene/TMDs vdWs hetero-structures have the very excellent film quality and spectral characteristics. There is the built-in electric field at the interface of graphene/TMDs heterojunction, which can lead to the effective separation of photo-generated electron–hole pairs. Monolayer WS2 and MoS2 material have the strong broadband absorption capabilities, the photo-generated electrons from WS2 can transfer to the underlying p-type graphene when graphene/WS2 hetero-structures material is exposed to the light, and the remaining holes can induced the light gate effect, which is contrast to the ordinary semiconductor photoconductors. The research on spectral characteristics of graphene/TMDs hetero-structures can pave the way for the application of novel optoelectronic devices.


Materials ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1032 ◽  
Author(s):  
Irina Antonova ◽  
Nadezhda Nebogatikova ◽  
Nabila Zerrouki ◽  
Irina Kurkina ◽  
Artem Ivanov

The resistivity of different films and structures containing fluorinated graphene (FG) flakes and chemical vapor deposition (CVD)-grown graphene of various fluorination degrees under tensile and compressive strains due to bending deformations was studied. Graphene and multilayer graphene films grown by means of the chemical vapor deposition (CVD) method were transferred onto the flexible substrate by laminating and were subjected to fluorination. They demonstrated a weak fluorination degree (F/C lower 20%). Compressive strains led to a strong (one-two orders of magnitude) decrease in the resistivity in both cases, which was most likely connected with the formation of additional conductive paths through fluorinated graphene. Tensile strain up to 3% caused by the bending of both types of CVD-grown FG led to a constant value of the resistivity or to an irreversible increase in the resistivity under repeated strain cycles. FG films created from the suspension of the fluorinated graphene with a fluorination degree of 20–25%, after the exclusion of design details of the used structures, demonstrated a stable resistivity at least up to 2–3% of tensile and compressive strain. The scale of resistance changes ΔR/R0 was found to be in the range of 14–28% with a different sign at the 10% tensile strain (bending radius 1 mm). In the case of the structures with the FG thin film printed on polyvinyl alcohol, a stable bipolar resistive switching was observed up to 6.5% of the tensile strain (bending radius was 2 mm). A further increase in strain (6.5–8%) leads to a decrease in ON/OFF current ratio from 5 down to 2 orders of magnitude. The current ratio decrease is connected with an increase under the tensile strain in distances between conductive agents (graphene islands and traps at the interface with polyvinyl alcohol) and thickness of fluorinated barriers within the active layer. The excellent performance of the crossbar memristor structures under tensile strain shows that the FG films and structures created from suspension are especially promising for flexible electronics.


Nanoscale ◽  
2019 ◽  
Vol 11 (16) ◽  
pp. 7944-7951 ◽  
Author(s):  
Jin-You Lu ◽  
Tuza Olukan ◽  
Srinivasa Reddy Tamalampudi ◽  
Abdulrahman Al-Hagri ◽  
Chia-Yun Lai ◽  
...  

In this work, we study the surface energy of monolayer, bilayer and multilayer graphene coatings, produced through exfoliation of natural graphite flakes and chemical vapor deposition.


ACS Nano ◽  
2012 ◽  
Vol 6 (2) ◽  
pp. 1142-1148 ◽  
Author(s):  
Carlos Diaz-Pinto ◽  
Debtanu De ◽  
Viktor G. Hadjiev ◽  
Haibing Peng

Nanoscale ◽  
2015 ◽  
Vol 7 (23) ◽  
pp. 10357-10361 ◽  
Author(s):  
Qinke Wu ◽  
Seong Jun Jung ◽  
Sung Kyu Jang ◽  
Joohyun Lee ◽  
Insu Jeon ◽  
...  

We report the selective growth of multi-layer graphene or a bilayer graphene film by reciprocal chemical vapor deposition.


Sign in / Sign up

Export Citation Format

Share Document