2D-3D Co-conduction Effect in PEO-based All-Solid-State Battery for Long Cycle Stability

2021 ◽  
Author(s):  
hao he ◽  
yuan chai ◽  
Xinlong Zhang ◽  
Penghui Shi ◽  
Jinchen Fan ◽  
...  
Keyword(s):  
Solid State ◽  
Solid Electrolytes ◽  
Lithium Ion ◽  
Rechargeable Batteries ◽  
Interface Problems ◽  
Cycle Stability ◽  
Ion Conductor ◽  
Lithium Rechargeable Batteries ◽  
Solid State Battery ◽  
New Type

The insufficient ionic conductivity and serious interface problems of oxide-based solid electrolytes greatly limit the performance of all solid-state lithium rechargeable batteries. Herein, a new type of lithium ion conductor...

Experimental Assessment of the Practical Oxidative Stability of Lithium Thiophosphate Solid Electrolytes

2019 ◽  
Author(s):  
Georg Dewald ◽  
Saneyuki Ohno ◽  
Marvin Kraft ◽  
Raimund Koerver ◽  
Paul Till ◽  
...  
Keyword(s):  
Cyclic Voltammetry ◽  
Solid State ◽  
Oxidative Stability ◽  
Photoelectron Spectroscopy ◽  
Solid Electrolytes ◽  
Stability Limit ◽  
Lithium Ion ◽  
High Energy ◽  
Redox Activity ◽  
Solid State Batteries

<p>All-solid-state batteries are often expected to replace conventional lithium-ion batteries in the future. However, the practical electrochemical and cycling stability of the best-conducting solid electrolytes, i.e. lithium thiophosphates, are still critical issues that prevent long-term stable high-energy cells. In this study, we use <i>stepwise</i><i>cyclic voltammetry </i>to obtain information on the practical oxidative stability limit of Li<sub>10</sub>GeP<sub>2</sub>S<sub>12</sub>, a Li<sub>2</sub>S‑P<sub>2</sub>S<sub>5</sub>glass, as well as the argyrodite Li<sub>6</sub>PS<sub>5</sub>Cl solid electrolytes. We employ indium metal and carbon black as the counter and working electrode, respectively, the latter to increase the interfacial contact area to the electrolyte as compared to the commonly used planar steel electrodes. Using a stepwise increase in the reversal potentials, the onset potential at 25 °C of oxidative decomposition at the electrode-electrolyte interface is identified. X‑ray photoelectron spectroscopy is used to investigate the oxidation of sulfur(-II) in the thiophosphate polyanions to sulfur(0) as the dominant redox process in all electrolytes tested. Our results suggest that after the formation of these decomposition products, significant redox behavior is observed. This explains previously reported redox activity of thiophosphate solid electrolytes, which contributes to the overall cell performance in solid-state batteries. The <i>stepwise cyclic voltammetry</i>approach presented here shows that the practical oxidative stability at 25 °C of thiophosphate solid electrolytes against carbon is kinetically higher than predicted by thermodynamic calculations. The method serves as an efficient guideline for the determination of practical, kinetic stability limits of solid electrolytes. </p>

Experimental Assessment of the Practical Oxidative Stability of Lithium Thiophosphate Solid Electrolytes

2019 ◽  
Author(s):  
Georg Dewald ◽  
Saneyuki Ohno ◽  
Marvin Kraft ◽  
Raimund Koerver ◽  
Paul Till ◽  
...  
Keyword(s):  
Cyclic Voltammetry ◽  
Solid State ◽  
Oxidative Stability ◽  
Photoelectron Spectroscopy ◽  
Solid Electrolytes ◽  
Stability Limit ◽  
Lithium Ion ◽  
High Energy ◽  
Redox Activity ◽  
Solid State Batteries

<p>All-solid-state batteries are often expected to replace conventional lithium-ion batteries in the future. However, the practical electrochemical and cycling stability of the best-conducting solid electrolytes, i.e. lithium thiophosphates, are still critical issues that prevent long-term stable high-energy cells. In this study, we use <i>stepwise</i><i>cyclic voltammetry </i>to obtain information on the practical oxidative stability limit of Li<sub>10</sub>GeP<sub>2</sub>S<sub>12</sub>, a Li<sub>2</sub>S‑P<sub>2</sub>S<sub>5</sub>glass, as well as the argyrodite Li<sub>6</sub>PS<sub>5</sub>Cl solid electrolytes. We employ indium metal and carbon black as the counter and working electrode, respectively, the latter to increase the interfacial contact area to the electrolyte as compared to the commonly used planar steel electrodes. Using a stepwise increase in the reversal potentials, the onset potential at 25 °C of oxidative decomposition at the electrode-electrolyte interface is identified. X‑ray photoelectron spectroscopy is used to investigate the oxidation of sulfur(-II) in the thiophosphate polyanions to sulfur(0) as the dominant redox process in all electrolytes tested. Our results suggest that after the formation of these decomposition products, significant redox behavior is observed. This explains previously reported redox activity of thiophosphate solid electrolytes, which contributes to the overall cell performance in solid-state batteries. The <i>stepwise cyclic voltammetry</i>approach presented here shows that the practical oxidative stability at 25 °C of thiophosphate solid electrolytes against carbon is kinetically higher than predicted by thermodynamic calculations. The method serves as an efficient guideline for the determination of practical, kinetic stability limits of solid electrolytes. </p>

Characterization of amorphous and crystalline Li2S–P2S5–P2Se5 solid electrolytes for all-solid-state lithium ion batteries

2012 ◽  
Vol 225 ◽  
pp. 626-630 ◽  
Author(s):  
Junghoon Kim ◽  
Yongsub Yoon ◽  
Minyong Eom ◽  
Dongwook Shin
Keyword(s):  
Solid State ◽  
Lithium Ion Batteries ◽  
Solid Electrolytes ◽  
Lithium Ion

Controllable Li 3 PS 4 –Li 4 SnS 4 solid electrolytes with affordable conductor and high conductivity for solid‐state battery

2021 ◽  
Author(s):  
Pingping Dong ◽  
Qing Jiao ◽  
Zengcheng Zhang ◽  
Miao Jiang ◽  
Changgui Lin ◽  
...  
Keyword(s):  
Solid State ◽  
Solid Electrolytes ◽  
High Conductivity ◽  
Solid State Battery

NASICON-structured Na ion conductor for next generation energy storage

2021 ◽  
pp. 2130005
Author(s):  
Qing Huang ◽  
Gongxuan Chen ◽  
Ping Zheng ◽  
Wei Li ◽  
Tian Wu
Keyword(s):  
Energy Storage ◽  
Solid State ◽  
Ionic Conductivity ◽  
Solid Electrolytes ◽  
Electrical Energy ◽  
Next Generation ◽  
Ion Conductor ◽  
Electrical Energy Storage ◽  
Composition Properties ◽  
Stable Structures

The demand for electrical energy storage (EES) is ever increasing in order to develop better batteries. NASICON-structured Na ion conductor represents a class of solid electrolytes, which is of great interest due to its superior ionic conductivity and stable structures. They are widely employed in all-solid-state ion batteries, all-solid-state air batteries, and hybrid batteries. In this review, their structure, composition, properties, and applications for next generation energy storage are reviewed.

Modeling and simulation of 2D lithium-ion solid state battery

2015 ◽  
Vol 39 (11) ◽  
pp. 1505-1518 ◽  
Author(s):  
Alex Bates ◽  
Santanu Mukherjee ◽  
Nicholas Schuppert ◽  
Byungrak Son ◽  
Joo Gon Kim ◽  
...  
Keyword(s):  
Solid State ◽  
Modeling And Simulation ◽  
Lithium Ion ◽  
Solid State Battery

PROPERTIES OF ALL-SOLID-STATE LITHIUM-ION RECHARGEABLE BATTERIES DEPOSITED BY RF MAGNETRON SPUTTERING

2013 ◽  
Vol 27 (22) ◽  
pp. 1350156 ◽  
Author(s):  
R. J. ZHU ◽  
Y. REN ◽  
L. Q. GENG ◽  
T. CHEN ◽  
L. X. LI ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Solid State ◽  
Magnetron Sputtering ◽  
Coulombic Efficiency ◽  
Electronic Conductivity ◽  
Lithium Ion ◽  
Rf Magnetron Sputtering ◽  
Rechargeable Batteries ◽  
Voltage Range

Amorphous V 2 O 5, LiPON and Li 2 Mn 2 O 4 thin films were fabricated by RF magnetron sputtering methods and the morphology of thin films were characterized by scanning electron microscopy. Then with these three materials deposited as the anode, solid electrolyte, cathode, and vanadium as current collector, a rocking-chair type of all-solid-state thin-film-type Lithium-ion rechargeable battery was prepared by using the same sputtering parameters on stainless steel substrates. Electrochemical studies show that the thin film battery has a good charge–discharge characteristic in the voltage range of 0.3–3.5 V, and after 30 cycles the cell performance turned to become stabilized with the charge capacity of 9 μAh/cm2, and capacity loss of single-cycle of about 0.2%. At the same time, due to electronic conductivity of the electrolyte film, self-discharge may exist, resulting in approximately 96.6% Coulombic efficiency.

Solid-state amperometric CO2 sensor using a lithium-ion conductor

2003 ◽  
Vol 89 (3) ◽  
pp. 311-314 ◽  
Author(s):  
Ji-Sun Lee ◽  
Jong-Heun Lee ◽  
Seong-Hyeon Hong
Keyword(s):  
Solid State ◽  
Lithium Ion ◽  
Ion Conductor ◽  
Co2 Sensor
Sign in / Sign up

Export Citation Format

Share Document