scholarly journals Water-soluble ZnSe/ZnS:Mn/ZnS quantum dots convert UV to visible light for improved Si solar cell efficiency

2021 ◽  
Author(s):  
Hisaaki Nishimura ◽  
Takaya Maekawa ◽  
Kazushi Enomoto ◽  
Naoteru Shigekawa ◽  
Tomomi Takagi ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Solar Cells ◽  
Solar Cell ◽  
Visible Light ◽  
Solar Spectrum ◽  
Water Soluble ◽  
Solar Cell Efficiency ◽  
Cell Efficiency ◽  
Si Solar Cell ◽  
Si Solar Cells

The sensitivity of Si solar cells to the UV portion of the solar spectrum is low, and must be increased to further improve their efficiencies.

scholarly journals The Viability of Organic Dyes in Luminescent Down-Shifting Layers for the Enhancement of Si Solar Cell Efficiency

2020 ◽  
Vol 995 ◽  
pp. 71-76
Author(s):  
Aaron Glenn ◽  
Conor Mc Loughlin ◽  
Hind Ahmed ◽  
Hoda Akbari ◽  
Subhash Chandra ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Organic Dyes ◽  
Polyvinyl Butyral ◽  
High Energy ◽  
Silicon Solar Cells ◽  
Solar Cell Efficiency ◽  
Cell Efficiency ◽  
Si Solar Cell ◽  
Si Solar Cells

The main energy losses in solar cells are related to spectral losses where high energy photons are not used efficiently, and energy is lost via thermalization which reduces the solar cell’s overall efficiency. A way to tackle this is to introduce a luminescent down-shifting layer (LDS) to convert these high energy photons into a lower energy bracket helping the solar cell to absorb them and thus generating a greater power output. In this paper, lumogen dye Violet 570 has been used as LDS coated films of 10μm and 60μm placed on top of Si solar cells. The dye was incorporated into polymer films of Polyvinyl Butyral (PVB) and Polymethyl Methacrylate (PMMA) after which they were tested for their absorption, transmission and emission properties. Once optimised layers had been determined, they were deposited directly onto silicon solar cells and the external quantum efficiency (EQE) of the Si solar cells were measured with and without the LDS layers. The resulting graphs have shown an increase of up to 2.9% in the overall EQE efficiency after the lumogen films had been applied.

Efficient Thin-Film Polycrystalline-Silicon Solar Cells Based on Aluminium-Induced Crystallization

2007 ◽  
Vol 989 ◽  
Author(s):  
Ivan Gordon ◽  
Lode Carnel ◽  
Dries Van Gestel ◽  
Guy Beaucarne ◽  
Jef Poortmans
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
Current Density ◽  
Polycrystalline Silicon ◽  
Cell Process ◽  
Cell Efficiency ◽  
Si Solar Cell ◽  
Si Solar Cells ◽  
Induced Crystallization

AbstractEfficient thin-film polycrystalline-silicon (pc-Si) solar cells on inexpensive substrates could lower the price of photovoltaic electricity substantially. At the MRS conference in 2006, we presented a pc-Si solar cell with an efficiency of 5.9% that had an absorber layer made by aluminum-induced crystallization (AIC) of amorphous silicon followed by high-temperature epitaxial thickening. The efficiency of this cell was mainly limited by the current density. To obtain higher efficiencies, we therefore need to implement an effective light trapping scheme in our pc-Si solar cell process. In this work, we describe how we recently enhanced the current density and efficiency of our cells. We achieved a cell efficiency of 8.0% for pc-Si cells in substrate configuration. Our cell process is based on pc-Si layers made by AIC and thermal CVD on smoothened alumina substrates. The cells are in substrate configuration with deposited a-Si heterojunction emitters and interdigitated top contacts. The front surface of the cells is plasma textured which leads to an increase in current density. The current density is further enhanced by minimizing the back surface field thickness of the cells to reduce the light loss in this layer. Our present pc-Si solar cell efficiency together with the fast progression that we have made over the last few years indicate the large potential of pc-Si solar cells based on the AIC seed layer approach.

Inhomogeneity of Plated Contacts for c-Si Solar Cells and Their Impact on Solar Cell Efficiency

2020 ◽  
Vol 10 (5) ◽  
pp. 1455-1462
Author(s):  
Hassan Merhi ◽  
Andreas Fell ◽  
Benjamin Grubel ◽  
Markus Glatthaar ◽  
Sven Kluska
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Solar Cell Efficiency ◽  
Cell Efficiency ◽  
Si Solar Cells

scholarly journals CdTe-Based Thin Film Solar Cells: Past, Present and Future

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1684
Author(s):  
Alessandro Romeo ◽  
Elisa Artegiani
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
Short Circuit ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Open Circuit ◽  
Early Years ◽  
Solar Cell Efficiency ◽  
Cell Efficiency

CdTe is a very robust and chemically stable material and for this reason its related solar cell thin film photovoltaic technology is now the only thin film technology in the first 10 top producers in the world. CdTe has an optimum band gap for the Schockley-Queisser limit and could deliver very high efficiencies as single junction device of more than 32%, with an open circuit voltage of 1 V and a short circuit current density exceeding 30 mA/cm2. CdTe solar cells were introduced at the beginning of the 70s and they have been studied and implemented particularly in the last 30 years. The strong improvement in efficiency in the last 5 years was obtained by a new redesign of the CdTe solar cell device reaching a single solar cell efficiency of 22.1% and a module efficiency of 19%. In this paper we describe the fabrication process following the history of the solar cell as it was developed in the early years up to the latest development and changes. Moreover the paper also presents future possible alternative absorbers and discusses the only apparently controversial environmental impacts of this fantastic technology.

CdSe/CdS Quantum Dot Core-Shell for Silicon Solar Cell Efficiency Enhancement

2020 ◽  
Vol 29 ◽  
pp. 8-14
Author(s):  
Manal Midhat Abdullah ◽  
Omar Adnan Ibrahim
Keyword(s):  
Solar Cell ◽  
Silicon Solar Cell ◽  
Energy Gap ◽  
Spectral Response ◽  
Solar Spectrum ◽  
Core Shell ◽  
Solar Cell Efficiency ◽  
Cell Efficiency ◽  
Electron Hole Pair ◽  
Pair Generation

Core-shell nanocrystals are utilized to improve vitality conversion efficiency of Si based solar cells. In the present work, a study of synthesis and characterization of photo luminescent, down-shifting, core-shell CdSe/CdS quantum dots is introduced. The QD,s absorb in the UV range (350nm) of the solar spectrum and emit photons with wavelengths centered at (574 nm). Calculated energy gap is (2.16 eV), which is well suited for Silicon absorption and electron-hole pair generation. The grain size is ranged between (1.814 and 3.456 nm). Results show that the cell efficiency is improved from (8.81%) (For a reference silicon solar cell) to (10.07%) (For a CdSe/CdS QD deposited directly on the surface of the solar cell). This improvement is referred to the spreading of the absorbed solar radiation over the spectral response of the Si solar cell.

scholarly journals Junction Configuration Effects on the Photovoltaic Parameters of a-Si/CZTS Solar Cells

2022 ◽  
Author(s):  
H. Bitam ◽  
B. Hadjoudja ◽  
Beddiaf Zaidi ◽  
C. Shakher ◽  
S. Gagui ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Solar Cells ◽  
Solar Cell ◽  
Open Circuit Voltage ◽  
Open Circuit ◽  
Photovoltaic Devices ◽  
Solar Cell Efficiency ◽  
Cell Efficiency ◽  
Reported Study ◽  
Stated Problem

Due to increased energy intensive human activities resulting accelerated demand for electric power coupled with occurrence of natural disasters with increased frequency, intensity, and duration, it becomes essential to explore and advance renewable energy technology for sustainability of the society. Addressing the stated problem and providing a radical solution has been attempted in this study. To harvest the renewable energy, among variety of solar cells reported, a composite a-Si/CZTS photovoltaic devices has not yet been investigated. The calculated parameters for solar cell based on the new array of layers consisting of a-Si/CZTS are reported in this study. The variation of i) solar cell efficiency as a function of CZTS layer thickness, temperature, acceptor, and donor defect concentration; ii) variation of the open circuit current density as a function of temperature, open circuit voltage; iii) variation of open circuit voltage as a function of the thickness of the CZTS layer has been determined. There has been no reported study on a-Si/CZTS configuration-based solar cell, analysis of the parameters, and study to address the challenges imped efficiency of the photovoltaic device and the same has been discussed in this work. The value of the SnO2/a-Si/CZTS solar cells obtained from the simulation is 23.9 %.

Thin‐film solar cells exceeding 22% solar cell efficiency: An overview on CdTe-, Cu(In,Ga)Se2-, and perovskite-based materials

2018 ◽  
Vol 5 (4) ◽  
pp. 041602 ◽  
Author(s):  
Michael Powalla ◽  
Stefan Paetel ◽  
Erik Ahlswede ◽  
Roland Wuerz ◽  
Cordula D. Wessendorf ◽  
...  
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
Thin Film Solar Cells ◽  
Solar Cell Efficiency ◽  
Cell Efficiency

scholarly journals Analytical Study of the Electrical Output Characteristics of c-Si Solar Cells by Cut and Shading Phenomena

Energies ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 3397 ◽  
Author(s):  
Jong Lim ◽  
Woo Shin ◽  
Hyemi Hwang ◽  
Young-Chul Ju ◽  
Suk Ko ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Crystalline Silicon ◽  
Short Circuit ◽  
Incident Light ◽  
Short Circuit Current ◽  
Open Circuit ◽  
Si Solar Cell ◽  
Si Solar Cells ◽  
Electrical Output

Cut solar cells have received considerable attention recently as they can reduce electrical output degradation when the c-Si solar cells (crystalline-silicon solar cells) are shaded. Cut c-Si solar cells have a lower short-circuit current than normal solar cells and the decrease in short-circuit currents is similar to the shading effect of c-Si solar cells. However, the results of this study’s experiment show that the shadow effect of a c-Si solar cell reduces the V o c (open circuit voltage) in the c-Si solar cell but the V o c does not change when the c-Si solar cell is cut because the amount of incident light does not change. In this paper, the limitations of the electrical power analysis of the cut solar cells were identified when only photo current was considered and the analysis of the electric output of the cut c-Si solar cells was interpreted with a method different from that used in previous analyses. Electrical output was measured when the shaded and cut rates of c-Si solar cells were increased from 0% to 25, 50 and 75%, and a new theoretical model was compared with the experimental results using MATLAB.

Sign in / Sign up

Export Citation Format

Share Document