scholarly journals Junction Configuration Effects on the Photovoltaic Parameters of a-Si/CZTS Solar Cells

2022 ◽  
Author(s):  
H. Bitam ◽  
B. Hadjoudja ◽  
Beddiaf Zaidi ◽  
C. Shakher ◽  
S. Gagui ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Solar Cells ◽  
Solar Cell ◽  
Open Circuit Voltage ◽  
Open Circuit ◽  
Photovoltaic Devices ◽  
Solar Cell Efficiency ◽  
Cell Efficiency ◽  
Reported Study ◽  
Stated Problem

Due to increased energy intensive human activities resulting accelerated demand for electric power coupled with occurrence of natural disasters with increased frequency, intensity, and duration, it becomes essential to explore and advance renewable energy technology for sustainability of the society. Addressing the stated problem and providing a radical solution has been attempted in this study. To harvest the renewable energy, among variety of solar cells reported, a composite a-Si/CZTS photovoltaic devices has not yet been investigated. The calculated parameters for solar cell based on the new array of layers consisting of a-Si/CZTS are reported in this study. The variation of i) solar cell efficiency as a function of CZTS layer thickness, temperature, acceptor, and donor defect concentration; ii) variation of the open circuit current density as a function of temperature, open circuit voltage; iii) variation of open circuit voltage as a function of the thickness of the CZTS layer has been determined. There has been no reported study on a-Si/CZTS configuration-based solar cell, analysis of the parameters, and study to address the challenges imped efficiency of the photovoltaic device and the same has been discussed in this work. The value of the SnO2/a-Si/CZTS solar cells obtained from the simulation is 23.9 %.

scholarly journals CdTe-Based Thin Film Solar Cells: Past, Present and Future

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1684
Author(s):  
Alessandro Romeo ◽  
Elisa Artegiani
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
Short Circuit ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Open Circuit ◽  
Early Years ◽  
Solar Cell Efficiency ◽  
Cell Efficiency

CdTe is a very robust and chemically stable material and for this reason its related solar cell thin film photovoltaic technology is now the only thin film technology in the first 10 top producers in the world. CdTe has an optimum band gap for the Schockley-Queisser limit and could deliver very high efficiencies as single junction device of more than 32%, with an open circuit voltage of 1 V and a short circuit current density exceeding 30 mA/cm2. CdTe solar cells were introduced at the beginning of the 70s and they have been studied and implemented particularly in the last 30 years. The strong improvement in efficiency in the last 5 years was obtained by a new redesign of the CdTe solar cell device reaching a single solar cell efficiency of 22.1% and a module efficiency of 19%. In this paper we describe the fabrication process following the history of the solar cell as it was developed in the early years up to the latest development and changes. Moreover the paper also presents future possible alternative absorbers and discusses the only apparently controversial environmental impacts of this fantastic technology.

scholarly journals Quantum Dot Solar Cells: Small Beginnings Have Large Impacts

2018 ◽  
Vol 8 (10) ◽  
pp. 1867 ◽  
Author(s):  
Abiseka Ganesan ◽  
Arjan Houtepen ◽  
Ryan Crisp
Keyword(s):  
Solar Cells ◽  
Excited State ◽  
Ground State ◽  
Open Circuit Voltage ◽  
Optoelectronic Devices ◽  
Open Circuit ◽  
Solar Cell Efficiency ◽  
Cell Efficiency ◽  
Quantum Dot Solar Cells ◽  
Device Efficiency

From a niche field over 30 years ago, quantum dots (QDs) have developed into viable materials for many commercial optoelectronic devices. We discuss the advancements in Pb-based QD solar cells (QDSCs) from a viewpoint of the pathways an excited state can take when relaxing back to the ground state. Systematically understanding the fundamental processes occurring in QDs has led to improvements in solar cell efficiency from ~3% to over 13% in 8 years. We compile data from ~200 articles reporting functioning QDSCs to give an overview of the current limitations in the technology. We find that the open circuit voltage limits the device efficiency and propose some strategies for overcoming this limitation.

Suppression of hydroxylation on the surface of colloidal quantum dots to enhance the open-circuit voltage of photovoltaics

2020 ◽  
Vol 8 (9) ◽  
pp. 4844-4849 ◽  
Author(s):  
Jung Hoon Song ◽  
Taewan Kim ◽  
Taiho Park ◽  
Sohee Jeong
Keyword(s):  
Quantum Dots ◽  
Solar Cell ◽  
Quantum Dot ◽  
Open Circuit Voltage ◽  
Open Circuit ◽  
Colloidal Quantum Dots ◽  
Solar Cell Efficiency ◽  
Cell Efficiency

Suppression of hydroxylation on quantum dot surfaces demonstrated a solar cell efficiency of 11.6% with the synthesis cost down up to 59.3%.

scholarly journals Simulation Effect of Ga2O3 layer thickness on CdTe solar cell by SCAPS-1D

2019 ◽  
Vol 24 (6) ◽  
pp. 110
Author(s):  
Adnan Alwan Mouhammed ◽  
Ayed N. Saleh
Keyword(s):  
Optical Properties ◽  
Solar Cell ◽  
Oxide Layer ◽  
Gallium Oxide ◽  
Fill Factor ◽  
Open Circuit Voltage ◽  
Short Circuit ◽  
Open Circuit ◽  
Solar Cell Efficiency ◽  
Cell Efficiency

The effect of Ga2O3 thickness on CdTe cells was studied using the SCAPS-1D simulator. The best solar cell efficiency (14.65%) was found at the thickness of the gallium oxide layer (1-10nm) and the cell efficiency (η) decrease with an increase in the thickness of the oxide layer and the decrease of the fill factor, thus decreasing the voltage current (I-V) and decreasing the current of the short circuit (Isc). The value of the open circuit voltage (VOC) is approximately constant and at 0.76V. The optical properties of the cell of quantitative efficiency are 86% and decrease within 18nm   http://dx.doi.org/10.25130/tjps.24.2019.116

scholarly journals English Effect of Activated Variations Carbon from Oil Palm Empty Fruit Bunch to Solar Cell Efficiency p-n Junction Layer Cu2O-TiO2.

2020 ◽  
Vol 5 (1) ◽  
pp. 44-49
Author(s):  
Rahmawati ◽  
Saparudin ◽  
Teuku Andi Fadly
Keyword(s):  
Solar Cells ◽  
Activated Carbon ◽  
Solar Cell ◽  
Oil Palm ◽  
Short Circuit ◽  
Open Circuit ◽  
Empty Fruit Bunch ◽  
X Ray Diffraction ◽  
Solar Cell Efficiency ◽  
Cell Efficiency

Research about influence effect of activated activated carbon from oil palm empty fruit bunch to solar cell efficiency p-n junction layer Cu2O-TiO2 and direct of sunlight. The layer of Cu2O formed from copper (Cu) burned with temperature 550  ͦ C in 100 minutes. The solar cells are made with TiO2  layer composed of activated carbon from oil palm empty fruit bunch of 0%, 10%, 15%, dan 20%. The parameters of the solar cell can be obtained by measuring the short circuit (Isc), voltage open circuit (Voc), maximum power and Fill Factor (FF) with resitor value (R) 0-50 kΩ. The  composed of TiO2 /activated carbon from oil palm empty fruit bunch analyzed using X-Ray Diffraction (XRD) and and Fourier Transform Infrared (FTIR) Spectrocopy. As a result addition of activated carbon from oil palm empty fruit bunch to solar cell efficiency is increase in the value, voltage and efficiency of solar cells. The results of the measurement of the highest efficiency of solar cells using a sun simulator and sunlight are found in variations of activated carbon 20%, with each efficiency values 0,043% and 0,0018%.

scholarly journals Numerical Simulation Analysis of Ag Crystallite Effects on Interface of Front Metal and Silicon in the PERC Solar Cell

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 592
Author(s):  
Myeong Sang Jeong ◽  
Yonghwan Lee ◽  
Ka-Hyun Kim ◽  
Sungjin Choi ◽  
Min Gu Kang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
High Efficiency ◽  
Open Circuit Voltage ◽  
Surface Recombination ◽  
Open Circuit ◽  
Surface Recombination Velocity ◽  
Metal Interface ◽  
Ag Crystallites ◽  
Recombination Velocity

In the fabrication of crystalline silicon solar cells, the contact properties between the front metal electrode and silicon are one of the most important parameters for achieving high-efficiency, as it is an integral element in the formation of solar cell electrodes. This entails an increase in the surface recombination velocity and a drop in the open-circuit voltage of the solar cell; hence, controlling the recombination velocity at the metal-silicon interface becomes a critical factor in the process. In this study, the distribution of Ag crystallites formed on the silicon-metal interface, the surface recombination velocity in the silicon-metal interface and the resulting changes in the performance of the Passivated Emitter and Rear Contact (PERC) solar cells were analyzed by controlling the firing temperature. The Ag crystallite distribution gradually increased corresponding to a firing temperature increase from 850 ∘C to 950 ∘C. The surface recombination velocity at the silicon-metal interface increased from 353 to 599 cm/s and the open-circuit voltage of the PERC solar cell decreased from 659.7 to 647 mV. Technology Computer-Aided Design (TCAD) simulation was used for detailed analysis on the effect of the surface recombination velocity at the silicon-metal interface on the PERC solar cell performance. Simulations showed that the increase in the distribution of Ag crystallites and surface recombination velocity at the silicon-metal interface played an important role in the decrease of open-circuit voltage of the PERC solar cell at temperatures of 850–900 ∘C, whereas the damage caused by the emitter over fire was determined as the main cause of the voltage drop at 950 ∘C. These results are expected to serve as a steppingstone for further research on improvement in the silicon-metal interface properties of silicon-based solar cells and investigation on high-efficiency solar cells.

Modeling of Abnormal Hysteresis in CsPbBr3 based Perovskite Solar Cells

2021 ◽  
Vol 34 (1) ◽  
pp. 01-08
Author(s):  
B GopalKrishna ◽  
Sanjay Tiwari
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Simulation Study ◽  
Open Circuit Voltage ◽  
Layer Structure ◽  
Short Circuit ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Open Circuit ◽  
Perovskite Layer

Perovskite solar cells are emerging photovoltaic devices with PCE of above 25%. Perovskite are suitable light absorber materials in solar cells with excellent properties like appropriate band gap energy, long carrier lifetime and diffusion length, and high extinction coefficient. Simulation study is an important technique to understand working mechanisms of perovskites solar cells. The study would help develop efficient, stable PSCs experimentally. In this study, modeling of perovskite solar cell was carried out through Setfos software. The optimization of different parameters of layer structure of solar cell would help to achieve maximum light absorption in the perovskite layer of solar cell. Simulation study is based drift-diffusion model to study the different parameters of perovskite solar cell. Hysteresis is one of the factors in the perovskite solar cell which may influence the device performance. The measurement of abnormal hysteresis can be done by current-voltage curve during backward scan during simulation study. In backward scan, the measurement starts from biasing voltage higher than open circuit voltage and sweep to voltage below zero. The numerical simulation used to study the various parameters like open circuit voltage, short circuit current, fill factor, power conversion efficiency and hysteresis. The simulation results would help to understand the photophysics of solar cell physics which would help to fabricate highly efficient and stable perovskite solar cells experimentally.

Thin‐film solar cells exceeding 22% solar cell efficiency: An overview on CdTe-, Cu(In,Ga)Se2-, and perovskite-based materials

2018 ◽  
Vol 5 (4) ◽  
pp. 041602 ◽  
Author(s):  
Michael Powalla ◽  
Stefan Paetel ◽  
Erik Ahlswede ◽  
Roland Wuerz ◽  
Cordula D. Wessendorf ◽  
...  
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Solar Cell ◽  
Thin Film Solar Cells ◽  
Solar Cell Efficiency ◽  
Cell Efficiency

The Study of Optical and Electrical Properties of a-SiC:H for Multi-junction Si Thin Film Solar Cell

2010 ◽  
Vol 1245 ◽  
Author(s):  
Jenny H. Shim ◽  
W.K. Yoon ◽  
S.T. Hwang ◽  
S.W. Ahn ◽  
H.M. Lee
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
High Efficiency ◽  
Open Circuit Voltage ◽  
Defect Density ◽  
Wide Bandgap ◽  
Open Circuit ◽  
Deposition Condition ◽  
Wide Bandgap Material ◽  
Pressure Regime

AbstractStudies have shown that wide bandgap material is required for high efficiency multi-junction solar cell applications. Here, we address proper deposition condition for high quality a-SiC:H films. In high power high pressure regime, we observed that the defect density get much lowered to the similar defect level of a-Si:H film with high H2 dilution. Single junction solar cells fabricated with the optimized condition show high open circuit voltage and low LID effect. The degradation after the LID test was only 13 % reduction of the efficiency indicating that a-SiC:H could be promising material for multi-junction solar cells.

scholarly journals Preparation of Hybrid Molybdenum Disulfide/Single Wall Carbon Nanotube–n-Type Silicon Solar Cells

2019 ◽  
Vol 10 (1) ◽  
pp. 287
Author(s):  
Samira Almalki ◽  
LePing Yu ◽  
Tom Grace ◽  
Abdulaziz S. R. Bati ◽  
Joseph G. Shapter
Keyword(s):  
Solar Cells ◽  
Carbon Nanotube ◽  
Fill Factor ◽  
Single Wall Carbon Nanotubes ◽  
Photovoltaic Devices ◽  
Layer System ◽  
Solar Cell Efficiency ◽  
Single Wall Carbon ◽  
Heterojunction Solar Cells ◽  
Cell Efficiency

Carbon nanotube/silicon (CNT/Si) heterojunction solar cells represent one new architecture for photovoltaic devices. The addition of MoS2 to the devices is shown to increase the efficiency of the devices. Two structures are explored. In one case, the single wall carbon nanotubes (SWCNTs) and MoS2 flakes are mixed to make a hybrid, which is then used to make a film, while in the other case, a two layer system is used with the MoS2 deposited first followed by the SWCNTs. In all cases, the solar cell efficiency is improved largely due to significant increases in the fill factor. The rise in fill factor is due to the semiconducting nature of the MoS2, which helps with the separation of charge carriers.

Sign in / Sign up

Export Citation Format

Share Document