Growth of TiO x overlayers by chemical vapour deposition on a single-crystal copper substrate

1994 ◽  
Vol 4 (9) ◽  
pp. 1403 ◽  
Author(s):  
Yuan Min Wu ◽  
Roger M. Nix
2015 ◽  
Vol 619 ◽  
pp. 406-410 ◽  
Author(s):  
Jianjun Chen ◽  
Mingming Wang ◽  
Xin Liao ◽  
Zhaoxiang Liu ◽  
Judong Zhang ◽  
...  

2005 ◽  
Vol 879 ◽  
Author(s):  
M. Wei ◽  
D. Zhi ◽  
J. L. MacManus-Driscoll

AbstractZnO, which exhibits a direct bandgap of 3.37 eV at room temperature with a large exciton binding energy of 60 meV,is of considerable technological importance because of its potential use in short-wavelength devices, such as ultraviolet (UV) light-emitting diodes and laser diodes. The fabrication and application of 1-D ZnO nanostructures has attracted considerable interest in recent years. In this work, we produced single crystal nanowires of zinc oxide using a novel self-seeded growth using ultrasonic spray assisted chemical vapour deposition, in which a nanocrystalline seed layer was first deposited onto a glass substrate and the nanowires subsequently grown using a different precursor concentration and substrate temperature. The diameter of the nanowires is in the range of 20-80 nm and the length of the wires is as long as 10 μm. The single crystal nature of the nanowires was revealed by high resolution transmission electron microscopy. The formation of liquid droplets due to the reducing atmosphere and the higher temperature during the nanowire growth was found to be the key step of the ZnO nanowire formation.


2021 ◽  
Vol 2057 (1) ◽  
pp. 012121
Author(s):  
I A Kostogrud ◽  
E V Boyko ◽  
P E Matochkin ◽  
D V Sorokin

Abstract This paper presents a comparison of chemical and plasma electrolyte polishing methods for preparing a copper substrate for graphene synthesis by chemical vapour deposition. It is shown that in order to achieve the most uniform morphology of the surface of the copper substrate, it is preferable to use the electrolyte-plasma polishing method. With its help, the proportion of multilayer regions in the graphene coating obtained as a result of CVD synthesis decreases. The obtained results may serve a recommendation for creating a graphene coating with specified parameters.


1989 ◽  
Vol 162 ◽  
Author(s):  
A. T. Collins ◽  
M. Kamo ◽  
Y. Sato

ABSTRACTPolycrystalline films and single crystals of diamond produced by microwaveassisted chemical vapour deposition (CVD) have been examined using absorption and cathodoluminescence spectroscopy. Measurements have been carried out on material as-grown, and after radiation damage by 2 MeV electrons.


2015 ◽  
Vol 25 (4) ◽  
pp. 291-299 ◽  
Author(s):  
S. Karamat ◽  
S. Sonuşen ◽  
Ü. Çelik ◽  
Y. Uysallı ◽  
E. Özgönül ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document