scholarly journals Mapping surface fluxes using airborne visible, near infrared, thermal infrared remote sensing data and a spatialized surface energy balance model

Agronomie ◽  
2002 ◽  
Vol 22 (6) ◽  
pp. 669-680 ◽  
Author(s):  
Fr�d�ric Jacob ◽  
Albert Olioso ◽  
Xing Fa Gu ◽  
Zhongbo Su ◽  
Bernard Seguin
2009 ◽  
Vol 6 (1) ◽  
pp. 1-38 ◽  
Author(s):  
M. Minacapilli ◽  
C. Agnese ◽  
F. Blanda ◽  
C. Cammalleri ◽  
G. Ciraolo ◽  
...  

Abstract. Actual evapotranspiration from typical Mediterranean crops has been assessed in a Sicilian study area by using Surface Energy Balance and Agro-Hydrological models. Both modelling approaches require remotely sensed data to estimate evapotranspiration fluxes in a spatially distributed way. The first approach exploits visible (VIS), near-infrared (NIR) and thermal (TIR) observations to solve the surface energy balance equation. To this end two different schemes have been tested: the two-sources TSEB model, where soil and vegetation components of the surface energy balance are treated separately, and the widely used one-source SEBAL model, where soil and vegetation are considered as a sole source. Actual evapotranspiration estimates by means of the two surface energy balance models have been compared with the results of the Agro-Hydrological model SWAP, applied in a spatially distributed way to simulate one-dimensional water flow in the soil-plant-atmosphere continuum. In this latter model, remote sensing data in the VIS and NIR spectral ranges have been used to infer spatially distributed vegetation parameters needed to set up the upper boundary condition of SWAP. In the comparison presented here, actual evapotranspiration values obtained from the application of the soil water balance model SWAP have been considered as the reference. Considering that the study area is characterized by typical Mediterranean sparse vegetation, i.e. olive, citrus and vineyards, we focused the attention on the main conceptual differences between SEBAL and TSEB. Airborne hyperspectral data acquired during a NERC campaign in 2005 have been used. The results of the investigation evidenced that the remote sensing two-sources approach used in TSEB model describes turbulent and radiative surface fluxes in a more realistic way than the one-source approach.


2005 ◽  
Vol 2 (1) ◽  
pp. 209-227 ◽  
Author(s):  
X. Jin ◽  
L. Wan ◽  
Z. Su

Abstract. Taiyuan basin is enclosed by hills and mountains, located in the middle of Shanxi province, standing between longitudes 111°40'–113°00'E and latitude 37°00'–38&deg00'N. With various types and wide distribution, the mineral resources are very abundant in this basin area. However, there is a great shortage of water resources. Due to continual fall of groundwater level caused by excessive extraction of ground water, some severe environmental problems are induced in this area, such as ground subsidence, etc. The goal of this paper is to estimate the spatial distribution of actual evaporation over the basin by using remote sensing data. The Surface Energy Balance System (SEBS) has been developed (Su, 2001, 2002). Using visible and infrared satellite remote sensing data, SEBS is based on land surface energy balance theory combined with the in-situ meteorological data or the product of atmospheric numerical model to estimate land surface turbulent flux and the relative evaporation at different scales. SEBS was served as the core methodology of this paper and was used for evaporation estimation. On the basis of hydro-geological data and NOAA satellite data, the SEBS was used in this paper for the estimation of actual evaporation of Taiyuan basin. The spatial distribution of the evaporative fraction and daily evaporation over the basin area was shown. On the other hand, the difference of land surface parameters and evaporation for various target types in the basin area was discussed.


2020 ◽  
Author(s):  
Joao Martins ◽  
Isabel Trigo ◽  
Mafalda Silva ◽  
Rita Cunha ◽  
Frederico Johannsen ◽  
...  

<p>The EUMETSAT Land Surface Analysis Satellite Application Facility (LSA-SAF) now offers a wide range of satellite-derived products for land surface monitoring. The catalogue comprises variables quantifying different terms of the surface energy balance (land surface temperature – LST - and emissivity, downwelling radiative fluxes and turbulent fluxes), as well as several vegetation-related indicators, such as the Leaf Area Index, Fraction of Vegetation Cover, Evapotranspiration, Net Primary Production and Fire Radiative Power. The availability of these datasets, especially taking into account that the time series now span nearly two decades,  already allows many interesting applications, overviewed in this presentation.</p><p>Comparisons of remote sensing data for land surfaces with corresponding model data have already been useful: the standard L2 (clear sky) LST has been used to diagnose a systematic cold bias of ERA5 skin temperature over the Iberian Peninsula. Offline simulations using H-TESSEL revealed that the bias could be alleviated using a more realistic representation of vegetation than what is currently used in ERA5. A recently developed product by LSA SAF allows LST retrievals for all-weather conditions, using a surface energy balance model to provide estimates under cloudy pixels. This product is compared to ERA5-Land skin temperature, showing that despite the increased level of detail of the latter (with respect to ERA5), it is still not representing the former correctly. ERA5 Land skin temperature shows large biases (of more than 10 K) and phase errors (with the satellite LST warming up prior to ERA-Land during the morning and cooling down earlier in the late afternoon). Comparisons of the different terms of the surface energy balance from ERA5-Land and LSA SAF are currently in progress to identify causes of the biases.</p><p>Another interesting application of LSA SAF products is the study of vegetation recovery over wild fire scars. Five wild fire events over Portugal were analyzed in terms of the long term anomalies introduced by the fire in 3 variables: LST, Albedo and Fraction of Vegetation Cover (all provided by LSA SAF). Results suggest that albedo returns to close-to-normal conditions in less than a year, while LST anomalies last much longer.  </p><p>Finally, trends in the land-ocean thermal contrast were evaluated over Western Iberia and Northwest Africa (due to its importance in generating coastal mesoscale circulations). The study used long time series from 1) satellite – LST from CM-SAF and SST from GHRSST; 2) ERA5 global reanalysis and 3) UERRA regional reanalysis. The results strongly depend on the used dataset and sub-region, with UERRA showing a sharp decrease of the thermal contrast over Iberia, while ERA5 shows a positive trend.</p><p>These results emphasize the need to improve the representation of surface processes in numerical models, particularly over land surfaces. This presentation shows that datasets such as the ones provided by the LSA SAF are key to such improvements.</p>


2021 ◽  
pp. 1-19
Author(s):  
Rebecca L. Stewart ◽  
Matthew Westoby ◽  
Francesca Pellicciotti ◽  
Ann Rowan ◽  
Darrel Swift ◽  
...  

Abstract Surface energy-balance models are commonly used in conjunction with satellite thermal imagery to estimate supraglacial debris thickness. Removing the need for local meteorological data in the debris thickness estimation workflow could improve the versatility and spatiotemporal application of debris thickness estimation. We evaluate the use of regional reanalysis data to derive debris thickness for two mountain glaciers using a surface energy-balance model. Results forced using ERA-5 agree with AWS-derived estimates to within 0.01 ± 0.05 m for Miage Glacier, Italy, and 0.01 ± 0.02 m for Khumbu Glacier, Nepal. ERA-5 data were then used to estimate spatiotemporal changes in debris thickness over a ~20-year period for Miage Glacier, Khumbu Glacier and Haut Glacier d'Arolla, Switzerland. We observe significant increases in debris thickness at the terminus for Haut Glacier d'Arolla and at the margins of the expanding debris cover at all glaciers. While simulated debris thickness was underestimated compared to point measurements in areas of thick debris, our approach can reconstruct glacier-scale debris thickness distribution and its temporal evolution over multiple decades. We find significant changes in debris thickness over areas of thin debris, areas susceptible to high ablation rates, where current knowledge of debris evolution is limited.


2020 ◽  
pp. 1-16
Author(s):  
Tim Hill ◽  
Christine F. Dow ◽  
Eleanor A. Bash ◽  
Luke Copland

Abstract Glacier surficial melt rates are commonly modelled using surface energy balance (SEB) models, with outputs applied to extend point-based mass-balance measurements to regional scales, assess water resource availability, examine supraglacial hydrology and to investigate the relationship between surface melt and ice dynamics. We present an improved SEB model that addresses the primary limitations of existing models by: (1) deriving high-resolution (30 m) surface albedo from Landsat 8 imagery, (2) calculating shadows cast onto the glacier surface by high-relief topography to model incident shortwave radiation, (3) developing an algorithm to map debris sufficiently thick to insulate the glacier surface and (4) presenting a formulation of the SEB model coupled to a subsurface heat conduction model. We drive the model with 6 years of in situ meteorological data from Kaskawulsh Glacier and Nàłùdäy (Lowell) Glacier in the St. Elias Mountains, Yukon, Canada, and validate outputs against in situ measurements. Modelled seasonal melt agrees with observations within 9% across a range of elevations on both glaciers in years with high-quality in situ observations. We recommend applying the model to investigate the impacts of surface melt for individual glaciers when sufficient input data are available.


2008 ◽  
Vol 47 (3) ◽  
pp. 819-834 ◽  
Author(s):  
Timothy M. Barzyk ◽  
John E. Frederick

Abstract Individual structures within the same local-scale (102–104 m) environment may experience different microscale (<103 m) climates. Urban microclimate variations are often a result of site-specific features, including spatial and material characteristics of surfaces and surrounding structures. A semiempirical surface energy balance model is presented that incorporates radiative and meteorological measurements to statistically parameterize energy fluxes that are not measured directly, including sensible heat transport, storage heat flux through conduction, and evaporation (assumed to be negligible under dry conditions). Two Chicago rooftops were chosen for detailed study. The City Hall site was located in an intensely developed urban area characterized by close-set high-rise buildings. The University rooftop was in a highly developed area characterized by three- to seven-story buildings of stone, concrete, and brick construction. Two identical sets of instruments recorded measurements contemporaneously from these rooftops during summer 2005, and results from the week of 29 July to 5 August are presented here. The model explains 83.7% and 96% of the variance for the City Hall and University sites, respectively. Results apply to a surface area of approximately 1260 m2, at length scales similar to the dimensions of built structures and other urban elements. A site intercomparison revealed variations in surface energy balance components caused by site-specific features and demonstrated the relevance of the model to urban applications.


Sign in / Sign up

Export Citation Format

Share Document