scholarly journals Importance of building services in ecological building assessments

2019 ◽  
Vol 111 ◽  
pp. 03061 ◽  
Author(s):  
Michaela Lambertz ◽  
Sebastian Theißen ◽  
Jannick Höper ◽  
Reinhard Wimmer
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Renewable Energy Sources ◽  
Green Building ◽  
Energy Performance ◽  
Simplified Approach ◽  
Ecological Requirements ◽  
Building Information ◽  
Building Life Cycle

The new Energy Performance of Buildings Directive (EPBD) 2018 and the GebäudeEnergieGesetz (GEG) tightened the requirements for energy efficiency and the use of renewable energy sources in buildings at EU and national levels. Environmental impacts from manufacturing, dismantling and recycling of buildings are not taken into account. Green Building Certification Systems, such as the DGNB or BNB systems, are therefore the only ones that (voluntarily) set holistic, ecological requirements for buildings. Based on a Whole-Building Life Cycle Assessment, the entire building life cycle and its environmental effects are evaluated. While building services in this context are usually only included in such a simplified approach, the full scope of the produced environmental impacts are underestimated and misjudged for the reduction of emissions and other environmental impacts. This publication uses the results of a life cycle assessment of a typical office building (in Germany) to show the amount of influence building services have on environmental impacts of buildings. Furthermore the study shows an approach how the very high pro-curement and calculation effort of LCA can be reduced by linking the Building Information Modelling (BIM) Method and LCA models to enable a significantly more efficient and easier calculation process, es-pecially for building services.

scholarly journals Life Cycle Assessment of Maize-Germ Oil Production and The Use of Bioenergy to Mitigate Environmental Impacts: A Gate-To-Gate Case Study

Resources ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 60 ◽  
Author(s):  
Mattias Gaglio ◽  
Elena Tamburini ◽  
Francesco Lucchesi ◽  
Vassilis Aschonitis ◽  
Anna Atti ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Energy Demand ◽  
Food Industry ◽  
Renewable Energy Sources ◽  
Environmental Benefits ◽  
Impact Categories ◽  
Industrial Processing ◽  
The Impact

The need to reduce the environmental impacts of the food industry is increasing together with the dramatic increment of global food demand. Circulation strategies such as the exploitation of self-produced renewable energy sources can improve ecological performances of industrial processes. However, evidence is needed to demonstrate and characterize such environmental benefits. This study assessed the environmental performances of industrial processing of maize edible oil, whose energy provision is guaranteed by residues biomasses. A gate-to-gate Life Cycle Assessment (LCA) approach was applied for a large-size factory of Northern Italy to describe: (i) the environmental impacts related to industrial processing and (ii) the contribution of residue-based bioenergy to their mitigation, through the comparison with a reference system based on conventional energy. The results showed that oil refinement is the most impacting phase for almost all the considered impact categories. The use of residue-based bioenergy was found to drastically reduce the emissions for all the impact categories. Moreover, Cumulative Energy Demand analysis revealed that the use of biomass residues increased energy efficiency through a reduction of the total energy demand of the industrial process. The study demonstrates that the exploitation of residue-based bioenergy can be a sustainable solution to improve environmental performances of the food industry, while supporting circular economy.

scholarly journals Life Cycle Assessment on Different Synthetic Routes of ZIF-8 Nanomaterials

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4998
Author(s):  
Vasileios Ntouros ◽  
Ioannis Kousis ◽  
Dimitra Papadaki ◽  
Anna Laura Pisello ◽  
Margarita Niki Assimakopoulos
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Environmental Sustainability ◽  
Energy Use ◽  
Renewable Energy Sources ◽  
Electricity Consumption ◽  
Research Activity ◽  
Synthetic Routes ◽  
The Impact

In the last twenty years, research activity around the environmental applications of metal–organic frameworks has bloomed due to their CO2 capture ability, tunable properties, porosity, and well-defined crystalline structure. Thus, hundreds of MOFs have been developed. However, the impact of their production on the environment has not been investigated as thoroughly as their potential applications. In this work, the environmental performance of various synthetic routes of MOF nanoparticles, in particular ZIF-8, is assessed through a life cycle assessment. For this purpose, five representative synthesis routes were considered, and synthesis data were obtained based on available literature. The synthesis included different solvents (de-ionized water, methanol, dimethylformamide) as well as different synthetic steps (i.e., hours of drying, stirring, precursor). The findings revealed that the main environmental weak points identified during production were: (a) the use of dimethylformamide (DMF) and methanol (MeOH) as substances impacting environmental sustainability, which accounted for more than 85% of the overall environmental impacts in those synthetic routes where they were utilized as solvents and as cleaning agents at the same time; (b) the electricity consumption, especially due to the Greek energy mix which is fossil-fuel dependent, and accounted for up to 13% of the overall environmental impacts in some synthetic routes. Nonetheless, for the optimization of the impacts provided by the energy use, suggestions are made based on the use of alternative, cleaner renewable energy sources, which (for the case of wind energy) will decrease the impacts by up to 2%.

scholarly journals LIFE CYCLE ASSESSMENT AND SHORT-TERM MEASUREMENTS OF INDOOR ENVIRONMENTAL QUALITY OF A WOODEN FAMILY HOUSE

2020 ◽  
Author(s):  
Silvia Vilčeková ◽  
Katarína Harčárová ◽  
Andrea Moňoková ◽  
Eva Krídlová Burdová
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Environmental Quality ◽  
Energy Performance ◽  
Physical Parameters ◽  
Indoor Environmental Quality ◽  
Short Term ◽  
Family House

Nowadays, there is an increased trend in the construction of nearly zero energy buildings which can be also characterized as green buildings. Several studies confirm that wooden buildings fulfil these requirements. However, there is no detailed research related to the quality of the indoor environment in new wooden family houses. For this reason, this paper focuses on monitoring of the indoor environmental quality in a selected wooden family house. Short-term measurements are aimed at investigation of physical parameters (air temperature, relative humidity, air velocity and noise) and chemical factors such as concentrations of particulate matters and CO2. At the same time, environmental impacts were also assessed for impact categories such as: global warming potential (GWP), ozone depletion potential (ODP) acidification potential (AP), eutrophication potential (EP), photochemical ozone creation potential (POCP) ex-pressed as kilogram CO2eq, CFC11eq, SO2eq, PO43–eq and kilogram of C2H4eq within “Cradle to Grave” boundary by using the life cycle assessment (LCA) method. The main contribution of this study is demonstration that wooden build-ings have substantial share in the reduction of environmental impacts. So far, results indicate that the design of wooden houses correspond with the increasing demands of occupants in terms of environmental, social and energy performance.

scholarly journals Evaluating the Environmental Impacts and Energy Performance of a Wind Farm System Utilizing the Life-Cycle Assessment Method: A Practical Case Study

Energies ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 3263 ◽  
Author(s):  
Mohamed R. Gomaa ◽  
Hegazy Rezk ◽  
Ramadan J. Mustafa ◽  
Mujahed Al-Dhaifallah
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Wind Turbine ◽  
Environmental Impacts ◽  
Wind Farm ◽  
Wind Farms ◽  
Energy Performance ◽  
Practical Case ◽  
Energy Payback

The ever-increasing popularity of finding alternative forms of renewable energy has seen an increased interest and utilization of wind energy. The objective of this research therefore, is to evaluate the environmental impacts and energy performance of wind farms. This study was operationalized in Jordan using a life-cycle assessment (LCA) method. The environmental impact is evaluated through lifecycle emissions that include all emissions during various phases of the project. The energy performance is illustrated by the energy indicators. The latter is the energy payback ratio (EPR) and the energy payback time (EPT). This study was conducted on a 38 Vestas V112 3-MW wind turbine located in the southern region of Tafilah in Jordan that is host to the country’s first wind farm. SimaPro 7.1 software was used as the modeling platform. Data for this study were collated from various sources, including, manufacturers, the wind turbine farm, and local subcontractors. A software database was used for the modeling process, and the data obtained modeled in accordance with ISO 14040 standards. The findings of this study indicate that the impacts of the transportation and installation phases were moderate, with the largest negative environmental impact deriving from the manufacturing phase. To remedy some of the negative impacts in these phases, green cement was used for the turbine foundation to limit the environmental impacts to be had during the installation phase, while the transportation phase saw the utilization of locally-manufactured turbines. Furthermore, an evaluation of the study’s results revealed that the energy payback period of the wind farm is approximately 0.69 year (8 months), while the payback ratio is 29, and the annual CO2 saving estimated to be at 2.23 × 108 kg, 3.02 × 108 kg, 3.10 × 108 kg for an annual generated power of 371, 501, and 515 GWh/year.

A taxonomy for Whole Building Life Cycle Assessment (WBLCA)

2019 ◽  
Vol 8 (3) ◽  
pp. 190-205
Author(s):  
Barbara X. Rodriguez ◽  
Kathrina Simonen ◽  
Monica Huang ◽  
Catherine De Wolf
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Green Building ◽  
Rating Systems ◽  
Content Type ◽  
Definition Of ◽  
Building Life Cycle ◽  
Global Carbon ◽  
Practical Implications ◽  
Goal And Scope

Purpose The purpose of this paper is to present an analysis of common parameters in existing tools that provide guidance to carry out Whole Building Life Cycle Assessment (WBLCA) and proposes a new taxonomy, a catalogue of parameters, for the definition of the goal and scope (G&S) in WBLCA. Design/methodology/approach A content analysis approach is used to identify, code and analyze parameters in existing WBLCA tools. Finally, a catalogue of parameters is organized into a new taxonomy. Findings In total, 650 distinct parameter names related to the definition of G&S from 16 WBLCAs tools available in North America, Europe and Australia are identified. Building on the analysis of existing taxonomies, a new taxonomy of 54 parameters is proposed in order to describe the G&S of WBLCA. Research limitations/implications The analysis of parameters in WBLCA tools does not include Green Building Rating Systems and is only limited to tools available in English. Practical implications This research is crucial in life cycle assessment (LCA) method harmonization and to serve as a stepping stone to the identification and categorization of parameters that could contribute to WBLCA comparison necessary to meet current global carbon goals. Social implications The proposed taxonomy enables architecture, engineering and construction practitioners to contribute to current WBLCA practice. Originality/value A study of common parameters in existing tools contributes to identifying the type of data that is required to describe buildings and contribute to build a standardized framework for LCA reporting, which would facilitate consistency across future studies and can serve as a checklist for practitioners when conducting the G&S stage of WBLCA.

scholarly journals Comparative Study on Life-Cycle Assessment and Carbon Footprint of Hybrid, Concrete and Timber Apartment Buildings in Finland

2022 ◽  
Vol 19 (2) ◽  
pp. 774
Author(s):  
Roni Rinne ◽  
Hüseyin Emre Ilgın ◽  
Markku Karjalainen
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
End Of Life ◽  
Environmental Impacts ◽  
Carbon Footprint ◽  
Building Materials ◽  
Construction Materials ◽  
Software Tool ◽  
Long Run ◽  
Building Life Cycle

To date, in the literature, there has been no study on the comparison of hybrid (timber and concrete) buildings with counterparts made of timber and concrete as the most common construction materials, in terms of the life cycle assessment (LCA) and the carbon footprint. This paper examines the environmental impacts of a five-story hybrid apartment building compared to timber and reinforced concrete counterparts in whole-building life-cycle assessment using the software tool, One Click LCA, for the estimation of environmental impacts from building materials of assemblies, construction, and building end-of-life treatment of 50 years in Finland. Following EN 15978, stages of product and construction (A1–A5), use (B1–B6), end-of-life (C1–C4), and beyond the building life cycle (D) were assessed. The main findings highlighted are as following: (1) for A1–A3, the timber apartment had the smallest carbon footprint (28% less than the hybrid apartment); (2) in A4, the timber apartment had a much smaller carbon footprint (55% less than the hybrid apartment), and the hybrid apartment had a smaller carbon footprint (19%) than the concrete apartment; (3) for B1–B5, the carbon footprint of the timber apartment was larger (>20%); (4) in C1–C4, the carbon footprint of the concrete apartment had the lowest emissions (35,061 kg CO2-e), and the timber apartment had the highest (44,627 kg CO2-e), but in D, timber became the most advantageous material; (5) the share of life-cycle emissions from building services was very significant. Considering the environmental performance of hybrid construction as well as its other advantages over timber, wood-based hybrid solutions can lead to more rational use of wood, encouraging the development of more efficient buildings. In the long run, this will result in a higher proportion of wood in buildings, which will be beneficial for living conditions, the environment, and the society in general.

scholarly journals Development of a Carbon Emissions Analysis Framework Using Building Information Modeling and Life Cycle Assessment for the Construction of Hospital Projects

2019 ◽  
Vol 11 (22) ◽  
pp. 6274 ◽  
Author(s):  
Kun Lu ◽  
Xiaoyan Jiang ◽  
Vivian W. Y. Tam ◽  
Mengyun Li ◽  
Hongyu Wang ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Carbon Emissions ◽  
Building Information Modeling ◽  
Green Building ◽  
Information Modeling ◽  
Analysis Framework ◽  
Inventory Analysis ◽  
Systematic Analysis ◽  
Building Information

Buildings produce a large amount of carbon emissions in their life cycle, which intensifies greenhouse-gas effects and has become a great threat to the survival of humans and other species. Although many previous studies shed light on the calculation of carbon emissions, a systematic analysis framework is still missing. Therefore, this study proposes an analysis framework of carbon emissions based on building information modeling (BIM) and life cycle assessment (LCA), which consists of four steps: (1) defining the boundary of carbon emissions in a life cycle; (2) establishing a carbon emission coefficients database for Chinese buildings and adopting Revit, GTJ2018, and Green Building Studio for inventory analysis; (3) calculating carbon emissions at each stage of the life cycle; and (4) explaining the calculation results of carbon emissions. The framework developed is validated using a case study of a hospital project, which is located in areas in Anhui, China with a hot summer and a cold winter. The results show that the reinforced concrete engineering contributes to the largest proportion of carbon emissions (around 49.64%) in the construction stage, and the HVAC (heating, ventilation, and air conditioning) generates the largest proportion (around 53.63%) in the operational stage. This study provides a practical reference for similar buildings in analogous areas and for additional insights on reducing carbon emissions in the future.

Sign in / Sign up

Export Citation Format

Share Document