scholarly journals Model Predictive Controller based Unified Power Quality Conditioner for Voltage Regulation Studies in 33- Bus Closed Loop Distribution System

2020 ◽  
Vol 184 ◽  
pp. 01073
Author(s):  
SK. Abdul Pasha ◽  
N. Prema Kumar
Keyword(s):  
Distribution System ◽  
Closed Loop ◽  
Voltage Regulation ◽  
Open Loop ◽  
Voltage Profile ◽  
Model Predictive Controller ◽  
Recent Developments ◽  
Predictive Controller ◽  
Resonant Controller ◽  
Power Quality Conditioner

Recent developments in FACTS have produced U.P.Q.C to mitigate sag and attenuate THD. U.P.Q.C has been urbanized as a FACTS controller between feeding end & far end of distribution system .The U-P-Q-C is capable of improving the voltage profile & reducing THD of distribution system by regulating the voltage using PR (Proportional-Resonant-Controller) and MPC (Model-Predictive) controller. This work proposes U-P-Q-C for Thirty Three Bus Systems .The objective of this work is to enhance-voltage-profile of T-T-B-S. The T-T-B-S in open loop & closed loop-TTBS- U-P-Q-C using PR and MPC-controllers are-modeled,pretend & their consequences are represented. Responses are estimated as a time of settle and error in steady state. The outcomes indicate that MP Controlled T-T-B-S system has better response than PR controlled T-T-B-S system.

scholarly journals Quasi-resonant inverter power pulsed radar system

2015 ◽  
pp. 27-32
Author(s):  
V. N. Dolov ◽  
V. F. Strelkov ◽  
V. V. Vanyaev ◽  
A. A. Kochnev
Keyword(s):  
Output Voltage ◽  
Closed Loop ◽  
Power Transmission ◽  
Voltage Regulation ◽  
Open Loop ◽  
Radar System ◽  
Resonant Converter ◽  
Resonant Inverter ◽  
Pulse Output ◽  
External Characteristics

Presented by quasi-resonant converter of a pulse of microwave power transmission device lamp radar with pulse output voltage regulation. The features of his work are given a mathematical model, the external characteristics and some simulation results in open-loop and closed-loop output voltage system.

scholarly journals Adaptive Droop Based Virtual Slack Control of Multiple DGs in Practical DC Distribution System to Improve Voltage Profile

Energies ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1541
Author(s):  
Soo Hyoung Lee
Keyword(s):  
Distribution System ◽  
Voltage Regulation ◽  
Optimal Operation ◽  
Computational Effort ◽  
Current Control ◽  
Voltage Profile ◽  
Dc System ◽  
Dc Distribution ◽  
Real Distribution ◽  
Marquardt Algorithm

This paper proposes an adaptive droop based virtual slack (ADVS) control for multiple distributed generations (DGs) to improve voltage stability of a practical DC distribution system. Although there have been many researches for optimal sizes of multiple DGs, their solutions are valid only in the particular operating point. Additionally, a previous study proposed a voltage control based optimal operation method, its performance depends on measurement accuracy in practice. The proposed ADVS control operates the system based on the current sensitivities between the DGs and loads, so that it can regulate the system voltages without a large computational effort. This is effective even if measurements are noisy and biased. All DGs contribute to voltage regulation by current control even though they do not directly control voltages. As an additional effect, they effectively share the load. To verify the proposed method, the DC system is modeled based on the real distribution system of the Do-gok area in Seoul, Korea. Then, the Levenberg-Marquardt algorithm determines its operation point. The proposed method is verified based on the electromagnetic transient (EMT) simulation with random loads.

Output-feedback model predictive controller for voltage regulation of a DC/DC converter

2013 ◽  
Vol 7 (16) ◽  
pp. 1959-1968 ◽  
Author(s):  
Seok-Kyoon Kim ◽  
Jung-Su Kim ◽  
Chang Reung Park ◽  
Young Il Lee
Keyword(s):  
Output Feedback ◽  
Voltage Regulation ◽  
Model Predictive Controller ◽  
Feedback Model ◽  
Predictive Controller

A New Control Algorithm for Three-Phase, Four-Wire Unified Power Quality Conditioner (UPQC) in Distributing Systems

2012 ◽  
Vol 433-440 ◽  
pp. 6731-6736
Author(s):  
Chandrakant L. Bhattar ◽  
Vilas N. Ghate
Keyword(s):  
Power Quality ◽  
Distribution System ◽  
Control Algorithm ◽  
Reactive Power ◽  
Voltage Regulation ◽  
Voltage Source ◽  
Voltage Source Inverter ◽  
Unified Power Quality Conditioner ◽  
Three Phase ◽  
Power Quality Conditioner

This paper presents the new control algorithm for three-phase, four-wire distributing system using unified power quality conditioner (UPQC). The UPQC, a combination of series and shunt active filter (AF) with common dc link, is one of the best solution towards the compensation of voltage sag, swell problems and also compensate voltage flicker/imbalance, reactive power, negative sequence current and maintain zero voltage regulation (ZVR) at the point of common coupling (PCC) on distribution system. The series AF is seen by using a three-phase, three leg voltage source inverter (VSI) and the shunt AF is of a three-phase, four leg voltage source inverter (VSI). The proposed model of the UPQC is developed in the MATLAB/SIMULINK environment and the simulation results prove the power quality improvement in the system.

Optimum Location of Voltage Regulators in the Radial Distribution Systems

2016 ◽  
Vol 17 (3) ◽  
pp. 351-361 ◽  
Author(s):  
Surender Reddy Salkuti ◽  
Young Hwan Lho
Keyword(s):  
Radial Distribution ◽  
Heuristic Algorithm ◽  
Distribution System ◽  
Distribution Systems ◽  
Voltage Regulation ◽  
Optimal Location ◽  
Voltage Regulators ◽  
Optimal Placement ◽  
Voltage Profile ◽  
Minimum Number

Abstract In this paper, a new heuristic algorithm is proposed for the optimum voltage control, which is applicable for the large Radial Distribution Systems (RDSs). In the RDSs, voltage levels at different buses can be maintained within the specified limits using the conductor grading or placing the Voltage Regulators (VRs) and capacitors at suitable locations. The proposed Back Tracking Algorithm (BTA) proposes the optimal location, number and tap positions of VRs to maintain the voltage profile within the desired limits and decreases losses in the system, which in turn maximizes the net savings in the operation of distribution system. In addition to BTA, an approach using the fuzzy logic called Fuzzy Expert System (FES) is also proposed, and the results of FES are compared with the results of BTA. This heuristic algorithm proposes the optimal location and tap setting of VRs, which contributes a smooth voltage profile along the network. It also used to access the minimum number of initially considered VRs, by moving them in such way as to control the network voltage at minimum possible cost. It is concluded that the FES also gives the optimal placement and the number along with the tap settings of VRs. The proposed FES contributes good voltage regulation, and decreases the power loss which in turn increases the net savings when compared to the BTA. The effectiveness of the proposed heuristic approaches are examined on practical 47 bus and 69 bus Radial Distribution Systems (RDSs).

Proportional Resonant Controlled Dual Active Bridge DC to AC Converter System with Enhanced Response

2018 ◽  
Vol 9 (1) ◽  
pp. 316
Author(s):  
R. Sowmya ◽  
S. Rama Reddy
Keyword(s):  
High Frequency ◽  
Closed Loop ◽  
Low Frequency ◽  
High Gain ◽  
Open Loop ◽  
Controlled System ◽  
Dual Active Bridge ◽  
Resonant Controller ◽  
Time Domain Response ◽  
High Frequency Ac

<p>This paper deals with comparison of responses of PI and Proportional Resonant controlled DC to AC Converter systems. The objective of this work is to regulate the output of Dual Active Bridge DC to DC converter (DABDAC). The input DC is converted into high frequency AC using Half bridge inverter. It is stepped up by using step up transformer and then it is rectified. The DC is converted into Low frequency AC using a Half bridge inverter. The open loop DABDAC system, closed loop PI based DABDAC system an Proportional Resonant Controller (PRC)based DABDAC system are designed, modeled and simulated using MATLAB Simulink. The results of PR controlled system are compared with those of PI controlled system. The results indicate that the proposed PRC-DABDAC has better time domain response than PI controlled DABDAC system. The proposed DABDAC system has advantages like high gain and steady state error in output voltage. </p>

Modeling and Simulation of Three Phase D-SVC for Load Compensation

2017 ◽  
Vol 8 (1) ◽  
pp. 262
Author(s):  
Ashwin Kumar Sahoo ◽  
Sarat Kumar Sahoo ◽  
Nalinikanta Mohanty
Keyword(s):  
Distribution System ◽  
Dynamic Capabilities ◽  
Reactive Power ◽  
Phase Distribution ◽  
Open Loop ◽  
Voltage Profile ◽  
Load Compensation ◽  
Three Phase ◽  
Shunt Capacitors ◽  
Shunt Compensation

The transmission of electric power has to take place in the most efficient way in addition to providing flexibility in the process. Flexible A.C. Transmission System (FACTS) promotes the use of static controllers to enhance the controllability and increase the power transfer capability. Providing reactive shunt compensation with shunt-connected capacitors and reactors is a well-established technique to get a better voltage profile in a power system. Shunt Capacitors are inexpensive but lack dynamic capabilities, thus some form of dynamically controlled reactive power compensation becomes essential.  In this paper, three phase Distribution Static Var Compensator (D-SVC) has been developed and studied under different conditions. Open loop mode and closed loop mode of operation of D-SVC is simulated and studied. The work presented here is very much useful for distribution system, for effective reactive power management and better Voltage control.

Sign in / Sign up

Export Citation Format

Share Document