scholarly journals Water retention and characteristic curves representing tropical clay soils from Africa

2020 ◽  
Vol 195 ◽  
pp. 01019
Author(s):  
K.M.A. Alhaj ◽  
G. Biscontin ◽  
M.Z.E.B Elshafie ◽  
A.S. Osman
Keyword(s):  
Unsaturated Soils ◽  
Water Retention ◽  
Void Ratio ◽  
Energy Levels ◽  
Dew Point ◽  
Degree Of Saturation ◽  
Measuring Instruments ◽  
High Plasticity ◽  
Soil Water Retention ◽  
Initial Void Ratio

Soil water retention curves (SWRCs) form an essential component of frameworks coupling the hydromechanical behaviour of unsaturated soils. The curves describe how suction changes with variables such as degree of saturation, void ratio and volumetric/gravimetric water content. SWRCs can be determined from incrementally drying initially saturated reconstituted samples to a final residual state, thus developing the primary drying curve (PDC). The primary wetting curve (PWC) is established from subsequent incremental wetting from residual state and is hysteretic compared with the PDC. SWRCs for reconstituted, high-plasticity, tropical clays from Africa (Sudan, Tanzania and South Africa) will be produced using suction measuring instruments, a tensiometer, filter paper and a dew point potentiometer. The development of SWRCs under various subsequent cycles of drying will be presented and discussed along with details concerning volumetric changes and cracking during drying. In order to investigate the uniqueness of the PDC and PWC and the effect of initial void ratio, SWRCs will be determined for samples formed by reconstituted from slurry under different applied energy levels.

scholarly journals Evolution of the soil water retention curve based on plastic volumetric strain

2020 ◽  
Vol 195 ◽  
pp. 02016
Author(s):  
J. Kodikara ◽  
C. Jayasundara
Keyword(s):  
Soil Water ◽  
Unsaturated Soils ◽  
Water Retention ◽  
Void Ratio ◽  
Volumetric Strain ◽  
Water Retention Curve ◽  
Soil Water Retention Curve ◽  
Soil Water Retention ◽  
Retention Curve ◽  
Plastic Volumetric Strain

The water retention behaviour of soil can be defined as the relationship between the degree of saturation (or water content) and suction at a constant temperature, which characterises the hydraulic behaviour of unsaturated soils, normally represented as the soil water retention curve (SWRC). The SWRC is commonly measured at nominal net stress by initially saturating a soil specimen and then subjecting it to drying and wetting paths, resulting in major drying and wetting curves. However, there is evidence that during these major drying and wetting paths and initial saturation, soil can undergo volumetric deformation with changes in void ratio, sometimes plastically. Therefore, for coupling the SWRC with mechanical behaviour, the dependency of SWRC on other state variables such as void ratio has been proposed. In this paper, an approach to defining SWRC for a particular plastic volumetric strain is presented within the generalised MPK model. The SWRC evolves as soil is subjected to wet/dry cycles, eventually approaching drying and wetting curves relevant to an environmentally-stabilised state. The performance of this model is demonstrated by the simulation of the loading/unloading/drying/wetting paths followed in a laboratory experiment. In addition, the evolution of the commonly-considered major drying and wetting curves is simulated, highlighting key features of the environmentally-stabilised line..

Experiments and interpretations on unsaturated hydraulic properties using water retention tests based on the membrane in Korea

2020 ◽  
Author(s):  
Seboong Oh ◽  
Sungjin Kim ◽  
Kwang Ik Son
Keyword(s):  
Unsaturated Soils ◽  
Hydraulic Properties ◽  
Water Retention ◽  
Void Ratio ◽  
Water Retention Curve ◽  
Soil Water Retention Curve ◽  
Soil Water Retention ◽  
Huge Amount ◽  
Retention Curve ◽  
Hydraulic Behavior

<p>In unsaturated soils, the soil water retention curve (SWRC) is most important in the fundamental hydraulic properties. In order to measure SWRCs through an alternative method in Korea, high air entry disks were replaced by micro membranes. Micro membranes are thin in which the air entry value is around 100kPa. Tests with the membrane are fast to reduce the duration of infiltration through the high air entry disk.</p><p>The water retention curves using the membrane were compared with the data using high air entry disks from the volumetric pressure plate extractor and Tempe pressure cell for samples of various sites. As a result, the SWRCs using the membrane were very similar for most cases and the micro membrane was verified as a useful tool to measure SWRCs.</p><p>The unsaturated hydraulic behavior could be measured easily using the membrane than ceramic disks and the huge amount of data could have been obtained in Korea. Using DB of SWRCs, the hydraulic properties were interpreted based on the parameters of the van Genuchten SWRC model. The void ratio and density are correlated to SWRCs under the same classification soil.</p><p><strong>Acknowledgements</strong> This research is supported by grant from Korean NRF (2019R1A2C1003604) and MOE (79608), which are greatly appreciated.</p>

scholarly journals Investigation into water retention behaviour of deformable soils

2013 ◽  
Vol 50 (2) ◽  
pp. 200-208 ◽  
Author(s):  
Simon Salager ◽  
Mathieu Nuth ◽  
Alessio Ferrari ◽  
Lyesse Laloui
Keyword(s):  
Water Content ◽  
Soil Water ◽  
Water Retention ◽  
Void Ratio ◽  
Degree Of Saturation ◽  
Retention Data ◽  
Soil Water Retention ◽  
Retention Behaviour ◽  
Wide Range ◽  
Water Retention Behaviour

The paper presents an experimental and modelling approach for the soil-water retention behaviour of two deformable soils. The objective is to investigate the physical mechanisms that govern the soil-water retention properties and to propose a constitutive framework for the soil-water retention curve accounting for the initial state of compaction and deformability of soils. A granular soil and a clayey soil were subjected to drying over a wide range of suctions so that the residual state of saturation could be attained. Different initial densities were tested for each material. The soil-water retention curves (SWRCs) obtained are synthesized and compared in terms of water content, void ratio, and degree of saturation, and are expressed as a function of the total suction. The studies enable assessment of the effect of the past and present soil deformation on the shape of the curves. The void ratio exerts a clear influence on the air-entry value, revealing that the breakthrough of air into the pores of the soil is more arduous in denser states. In the plane of water content versus suction, the experimental results highlight the fact that from a certain value of suction, the retention curves corresponding to different densities of the same soil are convergent. The observed features of behaviour are conceptualized into a modelling framework expressing the evolution of the degree of saturation as a function of suction. The proposed retention model makes use of the theory of elastoplasticity and can thus be generalized into a hysteretic model applicable to drying–wetting cycles. The calibration of the model requires the experimental retention data for two initial void ratios. The prediction of tests for further ranges of void ratios proves to be accurate, which supports the adequacy of formulated concepts.

scholarly journals Implementation of biocementation for a partially saturated problematic soil of the UK railway network

2020 ◽  
Vol 195 ◽  
pp. 05006
Author(s):  
Muhammad Umair Safdar ◽  
Maria Mavroulidou ◽  
Michael J. Gunn ◽  
Christopher Gray ◽  
Diane Purchase ◽  
...  
Keyword(s):  
Unsaturated Soils ◽  
Water Retention ◽  
Degree Of Saturation ◽  
Water Retention Curve ◽  
Soil Water Retention Curve ◽  
Soil Water Retention ◽  
Railway Network ◽  
Foundation Soil ◽  
The Uk ◽  
Problematic Soil

This paper refers to biocementation of a problematic soil of the UK railway network as a potential stabilisation technique of this soil using indigenous ureolytic bacteria. The soil is peat, a soft foundation soil also subject to oxidation wastage. As the peat is under existing embankments, electrokinetics (EK) is proposed as a promising technique to implement treatments. In the context of unsaturated soils the paper thus focuses on two particular aspects relevant for the implementation of treatments and the stability of this soil, namely: a) the effect of degree of saturation of the peat on the bio-electrokinetic treatment ; b) the soil water retention curve of the soil affecting flow and transport; these are relevant as we focus on understanding and modelling the implementation of treatments through electrokinetics; moreover for the peat it is of importance to understand moisture exchange in the vadose zone and control groundwater table levels (e.g. during electrokinetics) in order to prevent further oxidation. After isolation and screening of indigenous microorgansisms Bacillus licheniformis was selected for further testing. The results in terms of unconfined compressive strength, CaCO3 content, swelling and compression behaviour and water retention proved the feasibility of biocementation using this indigenous microorganism. Ongoing work is assessing the required treated soil characteristics and related required biocementation degree to solve UK rail's peat foundation problems. Upscaling of the techniques towards in situ implementation is also planned in the next stage of the research.

Soil-water retention curve model for fine-grained soils accounting for void ratio-dependent capillarity

2021 ◽  
Author(s):  
Jiangu Qian ◽  
Zhiqiang Lin ◽  
Zhenhao Shi
Keyword(s):  
Volume Change ◽  
Unsaturated Soils ◽  
Water Retention ◽  
Void Ratio ◽  
Water Retention Curve ◽  
Capillary Water ◽  
Soil Water Retention Curve ◽  
Soil Water Retention ◽  
Retention Curve ◽  
Fine Grained

This paper presents a soil-water retention curve (SWRC) model for fine-grained soils. Compared with existing studies, the proposed model accounts for the distinct roles of the volume change of soils on capillarity and adsorption mechanisms. The capillary water is described by a relation that includes the characteristics of the pore-size distributions as parameters, while the absorbed water is modeled by a novel proposition that both considers the phenomenon of capillary condensation and allows for the decoupling between the degree of capillary and adsorptive saturation. Based on this feature, the void ratio effects are considered in a way in which they only affect capillary water, i.e., consistent with how volume change influences soil microstructures. The relative contributions of void ratio effects and hydraulic hysteresis on the path- and history-dependence of SWRC in Sr-s-e space for deformable unsaturated soils are examined. The significance of discriminating the effects of volume change on capillary and adsorptive water is illustrated by applying the SWRC model to computing the shear strength of unsaturated soils with different void ratios. The model performance is assessed by comparing against test data reported for four types of fine-grained soils and that tested for natural loess in this work.

Coupling cyclic and water retention response of a clayey sand subjected to traffic and environmental cycles

Géotechnique ◽  
2021 ◽  
pp. 1-45
Author(s):  
Arash Azizi ◽  
Ashutosh Kumar ◽  
David G. Toll
Keyword(s):  
Unsaturated Soils ◽  
Water Retention ◽  
Resilient Modulus ◽  
Degree Of Saturation ◽  
Triaxial Tests ◽  
Soil Water Retention ◽  
Clayey Sand ◽  
Retention Model ◽  
Cyclic Response ◽  
The Impact

Compacted soils used as formation layers of railways and roads continuously undergo water content and suction changes due to seasonal variations. Such variations together with the impact of cyclic traffic-induced loads can alter the hydro-mechanical behaviour of the soil, which in turn affects the performance of the superstructure. This study investigates the impact of hydraulic cycles on the coupled water retention and cyclic response of a compacted soil. Suction-monitored cyclic triaxial tests were performed on a compacted clayey sand. The cyclic response of the soil obtained after applying drying and wetting paths was different to that obtained immediately after compaction. The results showed that both suction and degree of saturation are required to interpret the cyclic behaviour. A new approach was developed using (i) a hysteretic water retention model to predict suction variations during cyclic loading and (ii) Bishop's stress together with a bonding parameter to predict accumulated permanent strain and resilient modulus. The proposed formulations were able to predict the water retention behaviour, accumulated permanent strains and resilient modulus well, indicating the potential capability of using the fundamentals of unsaturated soils for predicting the effects of drying and wetting cycles on the coupled soil water retention and cyclic response.

scholarly journals Definition and experimental determination of a soil-water retention surface

2010 ◽  
Vol 47 (6) ◽  
pp. 609-622 ◽  
Author(s):  
S. Salager ◽  
M. S. El Youssoufi ◽  
C. Saix
Keyword(s):  
Water Content ◽  
Soil Water ◽  
Water Retention ◽  
Void Ratio ◽  
Silty Sand ◽  
Soil Water Retention ◽  
Initial Void Ratio ◽  
Hydromechanical Behaviour ◽  
Determination Methods

This paper deals with the definition and determination methods of the soil-water retention surface (SWRS), which is the tool used to present the hydromechanical behaviour of soils to highlight both the effect of suction on the change in water and total volumes and the effect of deformation with respect to the water retention capability. An experimental method is introduced to determine the SWRS and applied to a clayey silty sand. The determination of this surface is based on the measurement of void ratio, suction, and water content along the main drying paths. These paths are established for five different initial states. The experimental results allow us to define the parametric equations of the main drying paths, expressing both water content and void ratio as functions of suction and initial void ratio. A model of the SWRS for clayey silty sand is established in the space (void ratio – suction – water content). This surface covers all possible states of the soil inside the investigated range for the three variables. Finally, the SWRS is used to study the relations between water content and suction at a constant void ratio and between void ratio and suction at a constant water content.

scholarly journals An Insight into the Projection Characteristics of the Soil-Water Retention Surface

Water ◽  
2018 ◽  
Vol 10 (12) ◽  
pp. 1717 ◽  
Author(s):  
Yun-xue Ye ◽  
Wei-lie Zou ◽  
Zhong Han
Keyword(s):  
Soil Water ◽  
Unsaturated Soils ◽  
Water Retention ◽  
Degree Of Saturation ◽  
Soil Water Retention ◽  
Mechanical Coupling ◽  
Tangential Approximation ◽  
Coupling Behavior ◽  
Constant E ◽  
New Criterion

The soil-water retention surface (SWRS), which describes the variation of the degree of saturation (Sr) with suction (s) and void ratio (e), is of crucial importance for understanding and modeling the hydro-mechanical behavior of unsaturated soils. As a 3D surface in the Sr –e–s space, the SWRS can be projected onto the constant Sr, constant s, and constant e planes to form three different 2D projections, which is essential for establishing the SWRS and understanding its various characteristics. This paper presents a series of investigations on the various characteristics of the three SWRS projections. For the Sr –s and Sr –e relationships, (i) a tangential approximation approach is proposed to quantitatively capture their asymptotes, and (ii) a new criterion is presented to distinguish the low and high suction ranges within which these two relationships exhibit different features. On the other hand, a modified expression is introduced to better capture the characteristics of the s–e relationships. The various projection characteristics and the proposed approaches are validated using a wide set of experimental data from the literature. Studies presented in this paper are useful for the rational interpretation of the SWRS and the hydro-mechanical coupling behavior of unsaturated soils.

Evaluation of capillary water retention effects on the development of the suction stress characteristic curve

2020 ◽  
Vol 57 (10) ◽  
pp. 1439-1452 ◽  
Author(s):  
Emad Maleksaeedi ◽  
Mathieu Nuth
Keyword(s):  
Shear Strength ◽  
Soil Water ◽  
Unsaturated Soils ◽  
Water Retention ◽  
Characteristic Curve ◽  
Degree Of Saturation ◽  
Soil Water Retention ◽  
Retention Model ◽  
Suction Stress ◽  
Effective Degree

The suction stress characteristic framework is a practical approach for relating the suction and the water-filled pore volume to the stress state of unsaturated soils. It predicts the effective stress by developing the suction stress characteristic curve from the soil-water retention curve. In this framework, the effective degree of saturation is usually calculated by the empirical water retention model of van Genuchten (published in 1980). In this paper, the use of a generalized soil-water retention model proposed by Lu in 2016, which differentiates the role of capillary and adsorption mechanisms, in the suction stress characteristic framework is studied. A redefinition of the effective degree of saturation is suggested, by choosing the retention state where capillarity approaches zero instead of the residual retention state. The validity of this assumption is examined using experimental data obtained by unsaturated shear strength and retention tests and datasets collected from the literature. The proposed definition is applicable for a variety of soils where capillarity is the dominant mechanism in producing suction stress within the range of suction 0–1500 kPa. In addition, it is observed that the generalized soil-water retention model presents a more realistic prediction of unsaturated shear strength compared with empirical water retention models.

scholarly journals A methodology for the formulation of water retention models in deformable soils

2021 ◽  
Author(s):  
Domenico Gallipoli ◽  
Agostino Walter Bruno
Keyword(s):  
Water Retention ◽  
Void Ratio ◽  
Laboratory Data ◽  
Degree Of Saturation ◽  
Integration Constant ◽  
Soil Water Retention ◽  
Retention Models ◽  
Two Parameters ◽  
Differential Coupling ◽  
Water Ratio

AbstractThis paper presents a novel approach to soil–water retention modelling that is based on the analysis of the material pore network. The approach postulates the existence of a differential coupling function, which relates the variation of water ratio to the variation of void ratio at constant suction. Distinct differential coupling functions have been considered, and the most general option has been integrated in a closed-form relationship between water ratio and void ratio with a suction-dependent integration constant, whose expression describes the isochoric retention behaviour. Four alternative expressions of the suction-dependent integration constant have been proposed resulting in four different, but equivalent, models linking degree of saturation, void ratio and suction. Each model predicts the variation of degree of saturation by means of four parameters, namely two parameters accounting for the effect of void ratio and two parameters accounting for the effect of suction. The models have been calibrated against laboratory data from soils with distinct particle size distributions and have shown accurate predictions of degree of saturation at different levels of suction and void ratio. Validation against additional data has also indicated that the models can extrapolate the soil behaviour to stress paths and suction levels beyond those considered during calibration.

Sign in / Sign up

Export Citation Format

Share Document