scholarly journals Application of Horizontal Confluents Jets in a School Virtual Chamber

2021 ◽  
Vol 246 ◽  
pp. 02005
Author(s):  
Eusébio Conceição ◽  
Mª Inês Conceição ◽  
João Gomes ◽  
Mª Manuela Lúcio ◽  
Hazim Awbi
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Exhaust System ◽  
Comfort Level ◽  
Experimental Chamber ◽  
Airflow Rate ◽  
Inlet System ◽  
Head Level

The study presented in this work is performed in a virtual chamber, similar to an existing experimental chamber, with dimensions of 4.50×2.55×2.50 m3. The chamber, occupied with twelve virtual manikins, is equipped with six tables, twelve chairs, one exhaust system and one inlet system, based in confluents jets system. In the exhaust system are considered six air ducts, located above the head level, connected to the ceiling area. The inlet system, based in four vertical ducts, with 0.15 m diameter, located on the corners of the chamber, are equipped with consecutive holes, that promotes horizontal jets near the wall. The results demonstrate that when the airflow rate increases the air quality number increases, the thermal comfort number decreases and the ADI increases slightly. The predicted percentage of dissatisfied index values show that the thermal comfort level is acceptable, the dioxide carbon concentration values show that the indoor air quality is near the acceptable value and the Draught Risk is acceptable.

scholarly journals Coupling of differential CFD and integral human thermophysiology numerical models applied in indoor ventilated spaces

2021 ◽  
Vol 321 ◽  
pp. 03002
Author(s):  
Eusébio Conceição ◽  
João Gomes ◽  
M. Manuela Lúcio ◽  
M. Inês Conceição ◽  
André Ramos ◽  
...  
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Numerical Models ◽  
Exhaust System ◽  
Comfort Level ◽  
Experimental Chamber ◽  
Airflow Rate ◽  
Inlet System ◽  
Computer Fluid Dynamics ◽  
Air Diffusion

This work presents the development of the coupling of differential Computer Fluid Dynamics and integral human thermo-physiology numerical models applied in indoor ventilated spaces. The study is performed in a virtual chamber, similar to an existing experimental chamber, with dimensions of 4.50×2.55×2.50 m3. The chamber, occupied with twelve virtual manikins, is equipped with six tables, twelve chairs, one exhaust system and one inlet system, based on confluents jets system. In the exhaust system, they are considered six air ducts, located above the head level, connected to the ceiling area. The inlet system, based in four vertical ducts, with 0.15 m diameter, located on the corners of the chamber, is equipped with consecutive holes, that promotes horizontal jets near the wall. The results demonstrate that when the airflow rate increases the air quality number increases, the thermal comfort number decreases, and the Air Diffusion Index increases slightly. The predicted percentage of dissatisfied index values show that the thermal comfort level of occupants is acceptable, the dioxide carbon concentration values show that the indoor air quality is near the acceptable value and the Draught Risk is acceptable.

scholarly journals Comparative Study of a Clean Technology Based on DSF Use in Occupied Buildings for Improving Comfort in Winter

2021 ◽  
Vol 3 (2) ◽  
pp. 311-334
Author(s):  
Eusébio Conceição ◽  
João Gomes ◽  
Maria Manuela Lúcio ◽  
Maria Inês Conceição ◽  
Hazim Awbi
Keyword(s):  
Air Quality ◽  
Comparative Study ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Thermal Response ◽  
Clean Technology ◽  
Comfort Level ◽  
Airflow Rate ◽  
Winter Conditions

This paper presents a comparative study of a clean technology based on a DSF (double skin facade) used in winter conditions in the occupied buildings comfort improvement, namely the thermal comfort and air quality. The performance of a solar DSF system, the building’s thermal response, the internal thermal comfort and the internal air quality are evaluated. In this study, a DSF system, an air transport system and a HVAC (heating, ventilating and air conditioning) system based on mixing ventilation are used. The study considers a virtual chamber occupied by eight persons and equipped, in the outside environment, by three DSFs. A new horary pre-programming control methodology is developed and applied when the airflow rate is constant and the number of DSFs to operate is variable, when the airflow rate is variable and the number of DSFs to operate is constant and when the airflow rate is variable and the number of DSFs to operate is variable. This work uses a numerical model that simulates the integral building thermal behavior and an integral human thermal response. The internal air, provided by a mixing ventilating system, is warmed using the DSF system. The air temperature inside the DSF system and the virtual chamber, the thermal comfort level using the PMV index, the internal air quality using the carbon dioxide concentration and the uncomfortable hours are calculated for winter conditions. The results obtained show that the energy produced in the DSF, using solar radiation, guarantees acceptable thermal comfort conditions in the morning and in the afternoon. The indoor air quality obtained at the breathing level is acceptable. It is found that the airflow rate to be used is more decisive than the DSF operating methodology. However, when a solution is chosen that combines a ventilation rate with the number of DSF to operate, both variables throughout the day can obtain simultaneously better results for indoor air quality and thermal comfort according to the standards.

Application of solar radiation to the ventilation of an experimental chamber through a set of dual skin facades

2020 ◽  
pp. 25-35
Author(s):  
Eusébio Conceição ◽  
João Gomes ◽  
Mª Manuela Lúcio ◽  
Mª Inês Conceição ◽  
Hazim Awbi
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Integral Equations ◽  
Indoor Air ◽  
Carbon Dioxide Concentration ◽  
Integral Model ◽  
Experimental Chamber ◽  
Airflow Rate ◽  
Numerical Work

The aim of this numerical work is to evaluate the influence of a set of three Dual Skin Façades (DSF) on the thermal comfort and air quality inside a virtual occupied experimental chamber under various airflow rates. Each DSF is constituted by two transparent glasses and an adjustable venetian blind located in the air channel existing between the two surfaces. A system of energy balance integral equations is used to estimate the air temperature inside the virtual chamber and DSF and the temperature in the different elements of the virtual chamber and a system of mass balance integral equations is used to estimate the contaminants inside the virtual chamber and the DSF. The uncomfortable hours integral model is used to evaluate the total number of uncomfortable hours due to warm and cold indoor conditions and also due to indoor air quality conditions. The acceptable levels of indoor thermal comfort, evaluated by the Predicted Mean Vote index, must be within category C of ISO 7730 standard. The acceptable levels of indoor air quality, evaluated by the carbon dioxide concentration, must be below the limit of 1800 mg/m3 proposed by the ASHRAE 62.1 standard. Three airflow rates were chosen: 0.0389 m3/s, 0.0778 m3/s and 0.1167 m3/s. The airflow that guarantees, at the same time, the best indoor air quality and thermal comfort levels is obtained through the minimization of the total number of uncomfortable hours. As best option, it was obtained the airflow rate of 0.1167 m3/s.

scholarly journals Thermal comfort analysis in office buildings with different air-conditioning systems

2018 ◽  
Vol 9 (1) ◽  
pp. 59-63 ◽  
Author(s):  
J. Szabo ◽  
L. Kajtar
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Air Conditioning ◽  
Carbon Dioxide Concentration ◽  
Comfort Level ◽  
Office Buildings ◽  
Ducted Fan ◽  
Air Conditioning Systems

It is a prime aim to ensure a suitable comfort level in case of office buildings. The productivity of office employees is directly influenced by the comfort. Thermal discomfort and poor indoor air quality deteriorate the intensity and quality of human work. We investigated the comfort in office buildings with on-site measurements during the summer season. The office buildings were operating with different HVAC (Heating, Ventilating and Air-Conditioning) systems: ducted fan-coil with suspended ceiling, installation, non-ducted fan-coil with floor-mounted installation, active chilled beam with fresh air supply. We evaluated the thermal comfort under PMV (Predicted Mean Vote), PPD (Predicted Percentage of Dissatisfied), the local discomfort based on DR (Draught Rate) and the IAQ (Indoor Air Quality) based on carbon dioxide concentration. The comfort measurements were evaluated. The measurements were evaluated with scientific research methods, comfort categories based on the requirements of CR 1752. The results of this comparison were presented in this article.

Evaluation of comfort levels in office space equipped with HVAC system based in personalized ventilation system using energy produced in DSF systems

2020 ◽  
pp. 65-74
Author(s):  
Eusébio Conceição ◽  
Mª Inês Conceição ◽  
Mª Manuela Lúcio ◽  
João Gomes ◽  
Hazim Awbi
Keyword(s):  
Air Quality ◽  
Numerical Model ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Numerical Study ◽  
Ventilation System ◽  
Airflow Rate ◽  
Hvac System ◽  
Personalized Ventilation

In this study the numerical simulation of a Heating, Ventilating and Air Conditioning (HVAC) system, based in a personalized ventilation system, installed in an occupied office desk is made. The energy is produced in a Dual Skin Facades (DSF) system installed in the outdoor environment. The personalized ventilation system, placed above and below the writing area, installed in the desk central area. The office desk is occupied by eight virtual manikins. The numerical simulation is made in a winter typical day. This numerical study considers a coupling of a differential numerical model and an integral numerical model. The differential numerical model simulates the Computational Fluids Dynamics (CFD), evaluates the air velocity, air temperature, turbulence intensity and carbon dioxide concentration and calculates the indoor air quality. The integral numerical model simulates the Multi-Node Human Thermo-physiology Model, evaluates the tissue, blood and clothing temperatures distribution and calculates the thermal comfort level. The HVAC system, based on a DSF system, is built using three DSF unities, is equipped with internal venetian blinds. Each one, installed in a virtual chamber, is turned to south. The personalized ventilation system, made with eight upper and eight lower air terminal devices, is installed in the desk central area. On each table top two upper and two lower air terminal devices are considered in the left and right manikin area, while on each side of the table two upper and two lower air terminal devices are placed between the manikins. The office desk is occupied by eight virtual manikins, one sitting on each table top and three sitting on each side of the meeting table. In this numerical study, carried out in winter conditions, the occupants’ clothing level is 1 clo. In these situations a typical activity level of 1.2 met is considered. The evolution of indoor environmental conditions, in the DSF and in the office room, are calculated during a full winter typical day. The thermal comfort, the indoor air quality, the effectiveness for heat removal, the effectiveness for contaminant removal and the Air Distribution Index (ADI), are evaluated. In accordance with the obtained results the thermal comfort levels increase when the air renovation rate increases and the indoor air quality level increases when the air renovation rate increases. However, the ADI is quite constant when the inlet airflow rate increases, because the thermal comfort number decreases when the inlet airflow rate increases and the air quality number increases when the inlet airflow rate increases.

scholarly journals INDOOR AIR QUALITY STUDY ON COASTAL BAILEO IN WEST SERAM, MALUKU

2021 ◽  
Vol 47 (1) ◽  
pp. 35-42
Author(s):  
Purnama Esa Dora Tedjokoesoemo ◽  
Felicia Jane Thendean
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Quantitative Research ◽  
Comfort Level ◽  
Physical Factors ◽  
Air Velocity ◽  
Chemical Factors ◽  
Physical And Chemical

Thermal comfort is one of the most influencing aspects to affect comfort level in interior. Indoor Air Quality (IAQ) is one part of thermal comfort parametric often suggested in any building assessment for its role to affect health and comfort. IAQ is influenced by physical factors (temperature, air humidity and air velocity) and chemical factors (in the form of substances in the air). Traditional buildings in Indonesia, has long since consider IAQ in its passive design approach, one of them is in Baileo. This paper reports an investigation of IAQ in coastal Baileo in West Seram, Maluku. This quantitative research is conducted in method comparative analysis method. This paper discusses the relation between IAQ in Baileo to building formation and materials selection. The measurement done show that IAQ in coastal Baileo in West Seram has good performance on both physical and chemical factors.

Underground spaces natural energy applied in the building thermal conditions performance in summer conditions

2019 ◽  
pp. 72-82
Author(s):  
Eusébio Conceição ◽  
João Gomes ◽  
Maria Manuela Lúcio ◽  
Hazim Awbi
Keyword(s):  
Energy Storage ◽  
Air Quality ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Thermal Energy ◽  
Indoor Air ◽  
Thermal Energy Storage ◽  
Ventilation System ◽  
Comfort Level ◽  
Dynamic Software

This paper presents a numerical simulation, done by a Building Dynamic Software, of an application of underground thermal energy storage in a university building with complex topology. In this study, the level of thermal comfort of the occupants of a building located in a Mediterranean type environment is evaluated for typical summer conditions. The Building Dynamic Software calculates the air temperature of the spaces, the surface temperature of opaque bodies, transparent bodies and internal bodies, the mass of contaminants and water inside the spaces and in the surfaces, the thermal comfort of the occupants, the indoor air quality and the flow thermal energy from underground to the occupied spaces. The university building is divided into 319 spaces, distributed by four floors, and is composed by 329 transparent surfaces (windows) and 3585 opaque surfaces (internal and external walls, doors, and others). Below the ground floor is numerically considered an underground floor, with the same area of the building and with a typical floor height, used to thermal energy storage. The building internal ventilation system, during the day, transport the cooled airflow from the underground to thermally uncomfortable spaces. The cooled airflow is transported to spaces turned to East in the morning and to spaces turned to West in the afternoon. However, throughout the day the cooled air is transported to all the south-facing spaces. Two situations were simulated numerically: with and without underground thermal energy storage. The occupancy and the internal ventilation were also considered. The results show that the internal airflow and the outside temperatures recorded during the 24 hours of the day allow to guarantee the necessary underground thermal energy storage to cool the more uncomfortable spaces. The indoor air quality is acceptable and the thermal comfort level of occupants, considering their adaptation, is near the acceptable level suggested by the standards.

scholarly journals Assessing the Energy, Indoor Air Quality, and Moisture Performance for a Three-Story Building Using an Integrated Model, Part Two: Integrating the Indoor Air Quality, Moisture, and Thermal Comfort

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4915
Author(s):  
Seyedmohammadreza Heibati ◽  
Wahid Maref ◽  
Hamed H. Saber
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Integrated Model ◽  
Airflow Rate ◽  
Climate Conditions ◽  
Flow Balance ◽  
Moisture Performance ◽  
Heat And Moisture

In this paper, an integrated model that coupled CONTAM and WUFI was developed to assess the indoor air quality (IAQ), moisture, and thermal comfort performance. The coupling method of CONTAM and WUFI is described based on the exchange of airflow rate control variables as infiltration, natural and mechanical ventilation parameters between heat and moisture flow balance equations in WUFI and contaminant flow balances equations in CONTAM. To evaluate the predictions of the integrated model compared to single models of CONTAM and WUFI, four scenarios were used. These scenarios are airtight-fan off, airtight-fan on, leaky-fan off, and leaky-fan on, and were defined for a three-story house subjected to three different climate conditions of Montreal, Vancouver, and Miami. The measures of the simulated indoor CO2, PM2.5, and VOCs obtained by CONTAM; the simulated indoor relative humidity (RH), predicted percentage of dissatisfied (PPD), and predicted mean vote (PMV) obtained by WUFI; and those obtained by the integrated model are compared separately for all scenarios in Montreal, Vancouver, and Miami. Finally, the optimal scenarios are selected. The simulated results of the optimal scenarios with the integrated model method (−28.88% to 46.39%) are different from those obtained with the single models. This is due to the inability of the single models to correct the airflow variables.

Numerical and Experimental Modeling of Indoor Air Quality Inside a Conditioned Space with Mechanical Ventilation and DX-Air Conditioner

2020 ◽  
Vol 38 (9A) ◽  
pp. 1257-1275
Author(s):  
Wisam M. Mareed ◽  
Hasanen M. Hussen
Keyword(s):  
Air Quality ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Ventilation System ◽  
Thermal Conditions ◽  
Airflow Rate ◽  
Air Conditioner ◽  
Breathing Zone ◽  
Lecture Room ◽  
Ventilation Performance

 Elevated CO2 rates in a building affect the health of the occupant. This paper deals with an experimental and numerical analysis conducted in a full-scale test room located in the Department of Mechanical Engineering at the University of Technology. The experiments and CFD were conducted for analyzing ventilation performance. It is a study on the effect of the discharge airflow rate of the ceiling type air-conditioner on ventilation performance in the lecture room with the mixing ventilation. Most obtained findings show that database and questionnaires analyzed prefer heights between 0.2 m to 1.2 m in the middle of an occupied zone and breathing zone height of between 0.75 m to 1.8 given in the literature surveyed. It is noticed the mismatch of internal conditions with thermal comfort, and indoor air quality recommended by [ASHRAE Standard 62, ANSI / ASHRAE Standard 55-2010]. CFD simulations have been carried to provide insights on the indoor air quality and comfort conditions throughout the classroom. Particle concentrations, thermal conditions, and modified ventilation system solutions are reported.

Sign in / Sign up

Export Citation Format

Share Document