scholarly journals Moving element analysis of high-speed rail system accounting for hanging sleepers

2018 ◽  
Vol 148 ◽  
pp. 05007 ◽  
Author(s):  
Jian Dai ◽  
Kok Keng Ang ◽  
Dongqi Jiang
Keyword(s):  
Dynamic Response ◽  
High Speed ◽  
High Speed Train ◽  
Train Track ◽  
Element Analysis ◽  
High Speed Rail ◽  
Factors Affecting ◽  
Rail System ◽  
Track System ◽  
Ballasted Track

It is very common in the ballasted track system that sleepers are not well supported by the ballast materials due to the uneven settlement of the ballast under repeated train passage. These unsupported track elements are often termed as hanging sleepers and they can lead to undesirable effects due to increased dynamic response of the train-track system, especially when the speed of the train is high. In this paper, we present a computation scheme in conjunction with the moving element method for the analysis of high-speed train-track dynamics accounting for hanging sleepers. The proposed computational scheme will be first verified by comparison with available analytical results. The dynamic response of a high-speed train traveling on a ballasted track considering unsupported sleepers is next investigated. Various factors affecting the response of the high-speed rail system including the speed of the train, the number of hanging sleepers and the pattern of the hanging sleepers will be examined and discussed.

Moving element analysis of discretely supported high-speed rail systems

2017 ◽  
Vol 232 (3) ◽  
pp. 783-797 ◽  
Author(s):  
Jian Dai ◽  
Kok Keng Ang ◽  
Minh Thi Tran ◽  
Van Hai Luong ◽  
Dongqi Jiang
Keyword(s):  
High Speed ◽  
Railway Track ◽  
High Speed Train ◽  
Element Analysis ◽  
High Speed Rail ◽  
Mass System ◽  
Rail System ◽  
Rail Systems ◽  
Track System ◽  
The Difference

In this paper, a computational scheme in conjunction with the moving element method has been proposed to investigate the dynamic response of a high-speed rail system in which the discrete sleepers on the subgrade support the railway track. The track foundation is modeled as a beam supported by uniformly spaced discrete spring-damper units. The high-speed train is modeled as a moving sprung-mass system that travels over the track. The effect of the stiffness of the discrete supports, train speed, and railhead roughness on the dynamic behavior of the train–track system has been investigated. As a comparison, the response of a continuously supported high-speed rail system that uses a foundation stiffness equivalent to that of a discretely supported track has been obtained. The difference in results between the “equivalent” continuously supported and the discretely supported high-speed rails has been compared and discussed. In general, the study found that a high-speed train that travels over a discretely supported track produces more severe vibrations than that travels over a continuously supported track of equivalent foundation stiffness.

Dynamic Response of High-Speed Train-Track System Due to Unsupported Sleepers

2018 ◽  
Vol 18 (10) ◽  
pp. 1850122 ◽  
Author(s):  
Jian Dai ◽  
Kok Keng Ang ◽  
Dongqi Jiang ◽  
Van Hai Luong ◽  
Minh Thi Tran
Keyword(s):  
Dynamic Response ◽  
High Speed ◽  
Numerical Study ◽  
Computational Scheme ◽  
The Finite Element Method ◽  
High Speed Rail ◽  
Factors Affecting ◽  
Track System ◽  
Three Phase ◽  
Element Method

This paper is concerned with a numerical study on the dynamic response of a high-speed rail (HSR) system subjected to unsupported sleepers using the moving element method (MEM). A three-phase computational scheme in conjunction with the MEM is proposed to account for the motion of the unsupported sleepers in relation to the truncated rail segment in the moving coordinate system. The accuracy of the proposed computational scheme is examined by comparison with available analytical results in the literature and against the finite element method using commercial software. A parametric study is conducted using a computational model consisting of a 10-degree of freedom train model and a three-layer ballasted track model to investigate the effect of unsupported sleepers on the dynamic response of the HSR system. Various factors affecting the response of the HSR system, including the speed of the train, the number of unsupported sleepers and the distance between the unsupported sleepers, are examined and discussed.

ANALYSIS OF HIGH-SPEED RAIL ACCOUNTING FOR JUMPING WHEEL PHENOMENON

2014 ◽  
Vol 11 (03) ◽  
pp. 1343007 ◽  
Author(s):  
KOK KENG ANG ◽  
JIAN DAI ◽  
MINH THI TRAN ◽  
VAN HAI LUONG
Keyword(s):  
High Speed ◽  
Computational Study ◽  
Dynamic Responses ◽  
Contact Model ◽  
High Speed Train ◽  
Train Track ◽  
Hertz Contact ◽  
High Speed Rail ◽  
Track System ◽  
Hertz Contact Model

In this paper, a computational study using the moving element method (MEM) was carried out to investigate the dynamic response of a high-speed train–track system. Results obtained using Hertz contact model and linearized Hertz contact model are compared and discussed. The dynamic responses of a train travelling across a uniform foundation and a transition region are also investigated. Parametric study is performed to understand the effect of various factors on the occurrence and patterns of the jumping wheel phenomenon such as the variation of foundation stiffness, travelling speed of the train and the severity of railhead roughness.

Probabilistic Analysis of Flying Ballast on High-Speed Rail Lines

2017 ◽  
Author(s):  
Jieyi Deng ◽  
Guoqing Jing ◽  
Xiang Liu
Keyword(s):  
Risk Factors ◽  
High Speed ◽  
Safety Concern ◽  
Rolling Stock ◽  
Probabilistic Assessment ◽  
High Speed Train ◽  
Modeling Framework ◽  
High Speed Rail ◽  
Rail Systems ◽  
Ballasted Track

Safety is a top priority for the development of worldwide high-speed rail systems. Ballast flying is a particular safety concern when a high-speed train is traveling above a certain speed on the ballasted track. Displaced ballast particles from the track may cause damages to rolling stock, as well as the track infrastructure and wayside structures close to the sides of way. The objective of this research is to develop a probabilistic modeling framework to estimate the probability of ballast flight on specific segments or routes, accounting for several principal risk factors. Based on the probabilistic assessment, we propose a methodology to quantify the probability of flying ballast under certain scenarios. The methodology can be further developed, ultimately enabling a normative risk assessment for flying ballast risk management.

High Speed Rail: Track Construction Considerations

2011 ◽  
Author(s):  
Blaine O. Peterson
Keyword(s):  
High Speed ◽  
Optimal Solution ◽  
Rolling Stock ◽  
High Speed Rail ◽  
Track Geometry ◽  
Slab Track ◽  
Passenger Rail ◽  
Construction Methods ◽  
Track System ◽  
Ballasted Track

This paper discusses general High Speed Rail (HSR) track geometry, construction and maintenance practices and tolerances. The discussion will reference several key international projects and highlight different construction methods and the track geometry assessments used to establish and ensure serviceability of a typical HSR system. Historically, established tighter tolerances of “Express” HSR (i.e. operating speeds greater than 240 km/h or 150 mph) systems have favored the use of slab track systems over ballasted track systems. Slab track systems offer greater inherent stability while ballasted track systems generally require more frequent track geometry assessments and anomaly-correcting surfacing operations. The decisions related to which system to use for a given application involve numerous considerations discussed only briefly in this paper. In many cases, the optimal solution may include both track forms. Rolling stock considerations and their influence on track infrastructure design are considered beyond the scope of this paper. This paper will focus predominantly on two slab track systems widely used in international HSR projects: the Japanese J-slab track system; and the German Rheda slab track system. The French track system will be referenced as the typical ballasted track HSR design. The practices discussed in this paper generally apply to systems which are either primarily or exclusively passenger rail systems. In the U.S., these types of systems will necessarily exclude the systems the Federal Railway Administration (FRA) refers to as “Emerging” or “Regional” HSR systems which include passenger train traffic to share trackage on, what are otherwise considered, primarily freight lines.

Dynamic Response of High-Speed Train-Track-Bridge Coupling System Subjected to Simultaneous Wind and Rain

2021 ◽  
pp. 2150161
Author(s):  
Hongye Gou ◽  
Wenhao Li ◽  
Siqing Zhou ◽  
Yi Bao ◽  
Tianqi Zhao ◽  
...  
Keyword(s):  
Dynamic Response ◽  
High Speed ◽  
Simultaneous Action ◽  
High Speed Train ◽  
Train Track ◽  
Safe Operation ◽  
Coupling System ◽  
High Speed Trains ◽  
Track Bridge ◽  
Bridge System

The Lanzhou-Xinjiang High-speed Railway runs through a region of over 500[Formula: see text]km that is amenable to frequent winds. The strong wind and rainfall pose a great threat to the safe operation of high-speed trains. To tackle the aforementioned climate challenges, this paper investigates the dynamic response of the high-speed train-track-bridge coupling system under the simultaneous action of winds and rains for the safe operation of trains. Specifically, there are four main objectives: (1) to develop a finite element model to analyze the dynamic response of the train-track-bridge system in windy and raining conditions; (2) to investigate the aerodynamic loads posed to the train-track-bridge system by winds and rains; (3) to evaluate the effects of wind speed and rainfall intensity on the train-track-bridge system; and (4) to assess the safety of trains at different train speeds and under various wind-rain conditions. To this end, this paper first establishes a train-track-bridge model via ANSYS and SIMPACK co-simulation and the aerodynamics models of the high-speed train and bridge through FLUENT to form a safety analysis system for high-speed trains running on the bridge under the wind-rain conditions. Then, the response of the train-track-bridge system under different wind speeds and rainfall intensities is studied. The results show that the effects of winds and rains are coupled. The rule of variation for the train dynamic response with respect to various wind and rain conditions is established, with practical suggestions provided for control of the safe operation of high-speed trains.

Sign in / Sign up

Export Citation Format

Share Document