Dynamic Response of High-Speed Train-Track-Bridge Coupling System Subjected to Simultaneous Wind and Rain

2021 ◽  
pp. 2150161
Author(s):  
Hongye Gou ◽  
Wenhao Li ◽  
Siqing Zhou ◽  
Yi Bao ◽  
Tianqi Zhao ◽  
...  
Keyword(s):  
Dynamic Response ◽  
High Speed ◽  
Simultaneous Action ◽  
High Speed Train ◽  
Train Track ◽  
Safe Operation ◽  
Coupling System ◽  
High Speed Trains ◽  
Track Bridge ◽  
Bridge System

The Lanzhou-Xinjiang High-speed Railway runs through a region of over 500[Formula: see text]km that is amenable to frequent winds. The strong wind and rainfall pose a great threat to the safe operation of high-speed trains. To tackle the aforementioned climate challenges, this paper investigates the dynamic response of the high-speed train-track-bridge coupling system under the simultaneous action of winds and rains for the safe operation of trains. Specifically, there are four main objectives: (1) to develop a finite element model to analyze the dynamic response of the train-track-bridge system in windy and raining conditions; (2) to investigate the aerodynamic loads posed to the train-track-bridge system by winds and rains; (3) to evaluate the effects of wind speed and rainfall intensity on the train-track-bridge system; and (4) to assess the safety of trains at different train speeds and under various wind-rain conditions. To this end, this paper first establishes a train-track-bridge model via ANSYS and SIMPACK co-simulation and the aerodynamics models of the high-speed train and bridge through FLUENT to form a safety analysis system for high-speed trains running on the bridge under the wind-rain conditions. Then, the response of the train-track-bridge system under different wind speeds and rainfall intensities is studied. The results show that the effects of winds and rains are coupled. The rule of variation for the train dynamic response with respect to various wind and rain conditions is established, with practical suggestions provided for control of the safe operation of high-speed trains.

High-speed train–track–bridge dynamic interactions – Part I: theoretical model and numerical simulation

2013 ◽  
Vol 1 (1-2) ◽  
pp. 3-24 ◽  
Author(s):  
Wanming Zhai ◽  
He Xia ◽  
Chengbiao Cai ◽  
Mangmang Gao ◽  
Xiaozhen Li ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Theoretical Model ◽  
High Speed ◽  
High Speed Train ◽  
Train Track ◽  
Dynamic Interactions ◽  
Track Bridge

scholarly journals Effect of Bridge-Pier Differential Settlement on the Dynamic Response of a High-Speed Railway Train-Track-Bridge System

2017 ◽  
Vol 2017 ◽  
pp. 1-13 ◽  
Author(s):  
Xiaohui Zhang ◽  
Yao Shan ◽  
Xinwen Yang
Keyword(s):  
Dynamic Response ◽  
High Speed ◽  
Tensile Force ◽  
Differential Settlement ◽  
Bridge Pier ◽  
Vertical Acceleration ◽  
Train Track ◽  
Allowable Limit ◽  
High Speed Railway ◽  
Track Bridge

A model based on the theory of train-track-bridge coupling dynamics is built in the article to investigate how high-speed railway bridge pier differential settlement can affect various railway performance-related criteria. The performance of the model compares favorably with that of a 3D finite element model and train-track-bridge numerical model. The analysis of the study demonstrates that all the dynamic response for a span of 24 m is slightly larger than that for a span of 32 m. The wheel unloading rate increases with pier differential settlement for all of the calculation conditions considered, and its maximum value of 0.695 is well below the allowable limit. Meanwhile, the vertical acceleration increases with pier differential settlement and train speed, respectively, and the values for a pier differential settlement of 10 mm and speed of 350 km/h exceed the maximum allowable limit stipulated in the Chinese standards. On this basis, a speed limit for the exceeding pier differential settlement is determined for comfort consideration. Fasteners that had an initial tensile force due to pier differential settlement experience both compressive and tensile forces as the train passes through and are likely to have a lower service life than those which solely experience compressive forces.

Dynamic analysis of coupled train–track–bridge system subjected to debris flow impact

2018 ◽  
Vol 22 (4) ◽  
pp. 919-934 ◽  
Author(s):  
Xun Zhang ◽  
Zhipeng Wen ◽  
Wensu Chen ◽  
Xiyang Wang ◽  
Yan Zhu
Keyword(s):  
Debris Flow ◽  
Dynamic Analysis ◽  
High Speed ◽  
Impact Load ◽  
Dynamic Responses ◽  
Train Track ◽  
Running Safety ◽  
Track Bridge ◽  
Safety Indices ◽  
Bridge System

With the increasing popularity of high-speed railway, more and more bridges are being constructed in Western China where debris flows are very common. A debris flow with moderate intensity may endanger a high-speed train traveling on a bridge, since its direct impact leads to adverse dynamic responses of the bridge and the track structure. In order to address this issue, a dynamic analysis model is established for studying vibrations of coupled train–track–bridge system subjected to debris flow impact, in which a model of debris flow impact load in time domain is proposed and applied on bridge piers as external excitation. In addition, a six-span simply supported box girder bridge is considered as a case study. The dynamic responses of the bridge and the running safety indices such as derailment factor, offload factor, and lateral wheel–rail force of the train are investigated. Some influencing factors are then discussed based on parametric studies. The results show that both bridge responses and running safety indices are greatly amplified due to debris flow impact loads as compared with that without debris flow impact. With respect to the debris flow impact load, the boulder collision has a more negative impact on the dynamic responses of the bridge and train than the dynamic slurry pressure. Both the debris flow impact intensity and train speed determine the running safety indices, and the debris flow occurrence time should be also carefully considered to investigate the worst scenario.

scholarly journals High-Speed Train-Track-Bridge Dynamic Interaction considering Wheel-Rail Contact Nonlinearity due to Wheel Hollow Wear

2019 ◽  
Vol 2019 ◽  
pp. 1-18 ◽  
Author(s):  
Chao Chang ◽  
Liang Ling ◽  
Zhaoling Han ◽  
Kaiyun Wang ◽  
Wanming Zhai
Keyword(s):  
High Speed ◽  
Synthesis Method ◽  
Dynamic Interaction ◽  
High Speed Train ◽  
Train Track ◽  
High Speed Railway ◽  
Long Span ◽  
Continuous Girder Bridge ◽  
Girder Bridge ◽  
Track Bridge

Wheel hollow wear is a common form of wheel-surface damage in high-speed trains, which is of great concern and a potential threat to the service performance and safety of the high-speed railway system. At the same time, rail corridors in high-speed railways are extensively straightened through the addition of bridges. However, only few studies paid attention to the influence of wheel-profile wear on the train-track-bridge dynamic interaction. This paper reports a study of the high-speed train-track-bridge dynamic interactions under new and hollow worn wheel profiles. A nonlinear rigid-flexible coupled model of a Chinese high-speed train travelling on nonballasted tracks supported by a long-span continuous girder bridge is formulated. This modelling is based on the train-track-bridge interaction theory, the wheel-rail nonelliptical multipoint contact theory, and the modified Craig–Bampton modal synthesis method. The effects of wheel-rail nonlinearity caused by the wheel hollow wear are fully considered. The proposed model is applied to predict the vertical and lateral dynamic responses of the high-speed train-track-bridge system under new and worn wheel profiles, in which a high-speed train passing through a long-span continuous girder bridge at a speed of 350 km/h is considered. The numerical results show that the wheel hollow wear changes the geometric parameters of the wheel-rail contact and then deteriorates the train-track-bridge interactions. The worn wheels can increase the vibration response of the high-speed railway bridges.

scholarly journals Moving element analysis of high-speed rail system accounting for hanging sleepers

2018 ◽  
Vol 148 ◽  
pp. 05007 ◽  
Author(s):  
Jian Dai ◽  
Kok Keng Ang ◽  
Dongqi Jiang
Keyword(s):  
Dynamic Response ◽  
High Speed ◽  
High Speed Train ◽  
Train Track ◽  
Element Analysis ◽  
High Speed Rail ◽  
Factors Affecting ◽  
Rail System ◽  
Track System ◽  
Ballasted Track

It is very common in the ballasted track system that sleepers are not well supported by the ballast materials due to the uneven settlement of the ballast under repeated train passage. These unsupported track elements are often termed as hanging sleepers and they can lead to undesirable effects due to increased dynamic response of the train-track system, especially when the speed of the train is high. In this paper, we present a computation scheme in conjunction with the moving element method for the analysis of high-speed train-track dynamics accounting for hanging sleepers. The proposed computational scheme will be first verified by comparison with available analytical results. The dynamic response of a high-speed train traveling on a ballasted track considering unsupported sleepers is next investigated. Various factors affecting the response of the high-speed rail system including the speed of the train, the number of hanging sleepers and the pattern of the hanging sleepers will be examined and discussed.

scholarly journals Application of KLE-PEM for Random Dynamic Analysis of Nonlinear Train-Track-Bridge System

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Lizhong Jiang ◽  
Xiang Liu ◽  
Tuo Zhou ◽  
Ping Xiang ◽  
Yuanjun Chen ◽  
...  
Keyword(s):  
High Speed ◽  
Linear Models ◽  
Estimation Method ◽  
Point Estimation ◽  
Random Response ◽  
Train Track ◽  
Track Irregularity ◽  
Track Bridge ◽  
Point Estimation Method ◽  
Bridge System

A nonlinear train-track-bridge system (TTBS) considering the random track irregularity and mass of train is discussed. Based on the Karhunen–Loéve theory, the track irregularity is expressed and input into the TTBS, and the result of random response is calculated using the point estimation method. Two cases are used to compare and validate the applicability of the proposed method, which show that the proposed method has a high precision and efficiency. Then, taking a 7-span bridge and a high-speed train as an example, the calculation results of random response of the nonlinear and linear wheel-rail model are compared, and the results show that for the bridge and rail response, the nonlinear and linear models are almost the same. Finally, comparing the calculated probability distribution results with the test results, it shows that the method can be applied to the prediction of actual response range.

Sign in / Sign up

Export Citation Format

Share Document