scholarly journals Evaluation of notch effects in low cycle fatigue of alloy 718 using critical distances

2018 ◽  
Vol 165 ◽  
pp. 15001 ◽  
Author(s):  
Robert Eriksson ◽  
Kjell Simonsson ◽  
Daniel Leidermark ◽  
Johan Moverare
Keyword(s):  
Fatigue Life ◽  
Low Cycle Fatigue ◽  
Notch Root ◽  
Stress Gradient ◽  
Critical Distance ◽  
Fatigue Tests ◽  
Alloy 718 ◽  
Notched Specimens ◽  
Turbine Disks ◽  
As Stress

Gas turbine disks contain many notch-like features acting as stress raisers. The fatigue life based on the notch root stress may be overly conservative as the steep stress gradient in front of the notch may give rise to so-called notch support. In the current work, the theory of critical distances was applied to the prediction of the total fatigue life of low cycle fatigued, notched specimens made from alloy 718. The fatigue tests were performed at 450 °C and 550 °C. It was found that, for lives shorter than 5000–10000 cycles, the notched specimens had longer lives than would have been expected based on the notch root strain. For lives longer than 5000–10000 cycles, there were no notch support. The life prediction for notched specimens could be significantly improved by basing the prediction on the strain chosen some distance from the notch (the critical distance). An expression for calculating the critical distance based on the notch root strain was suggested.

Verification of the Prediction Methods of Strain Range in Notched Specimens Made of Mod.9Cr-1Mo

2010 ◽  
Author(s):  
Masanori Ando ◽  
Yuichi Hirose ◽  
Shingo Date ◽  
Sota Watanabe ◽  
Yasuhiro Enuma ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Elevated Temperature ◽  
Low Cycle Fatigue ◽  
Strain Range ◽  
Fatigue Tests ◽  
Estimation Methods ◽  
Prediction Methods ◽  
Test Machine ◽  
Notched Specimens ◽  
Creep Fatigue

Several innovative prediction methods of strain range have been developed in order to apply to the Generation IV plants. In a component design at elevated temperature, ‘strain range’ is used to calculate the fatigue and creep-fatigue damage. Therefore, prediction of ‘strain range’ is one of the most important issues to evaluate the components’ integrity during these lifetimes. To verify the strain prediction method of discontinues structures at evaluated temperature, low cycle fatigue tests were carried out with notched specimens. All the specimens were made of Mod.9Cr-1Mo, because it is a candidate material for a primary and secondary heat transports system components of JSFR (Japanese Sodium Fast Reactor). Deformation control fatigue tests and thermal fatigue tests were performed by ordinary uni-axial push-pull test machine and equipment generating the thermal gradient in the notched plate by induction heating. Stress concentration level was changed by varying the notch radius in the both kind of tests. Crack initiation and propagation process during the fatigue test were observed by the digital micro-scope and replica method. Elastic and inelastic FEAs were also carried out to estimate the ‘strain range’ for the prediction of fatigue life. Then the ranges of several strain predictions and estimations were compared with the test results. These predictions were based on the sophisticated technique to estimate the ‘strain range’ from elastic FEA. Stress reduction locus (SRL) method, simple elastic follow-up method, Neuber’s rule method and the methods supplied by elevated temperature design standards were applied. Through these results, the applicability and conservativeness of these strain prediction and estimation methods, which is the basis of the creep-fatigue life prediction, is discussed.

Axial and Diametral Cyclic Stress—Strain Response in Plain and Circumferentially Notched Cylindrical Bars at 550 °C

2006 ◽  
Vol 41 (4) ◽  
pp. 265-286 ◽  
Author(s):  
R. P Skelton ◽  
G. A Webster
Keyword(s):  
Low Cycle Fatigue ◽  
Notch Root ◽  
Hysteresis Loops ◽  
Cyclic Stress ◽  
Fatigue Tests ◽  
Gauge Length ◽  
Stress Strain ◽  
Deformation Response ◽  
Notched Specimens ◽  
Observed Behaviour

Cyclic stress-strain tests were undertaken at 550 °C on plain specimens and notched specimens of different notch acuities in several low- and high-alloy ferritic steels (1Cr-Mo-V, NF616, TB12M, and HCM12A). Integrated axial strains were measured between the minimum sections of the notches using a longitudinal extensometer, while surface hoop strains were measured by means of a diametral extensometer with probes located across the notch root. The same extensometry was employed in plain specimens. Over a period of 100 cycles, softening occurred in all plain specimens. These effects were also demonstrated in notched specimens in both axial and diametral directions, although to a lesser degree. From hysteresis loops determined in the notch tests, the cyclic deformation response of the notched regions was expressed in terms of an ‘equivalent gauge length’. Deviations from elastic-plastic behaviour in plain specimens were noted in that the commonly used ‘effective Poisson's ratiO' was greater than calculated. The effect was investigated further by exploring the characteristics of a very shallow notch, induced by straining a plain specimen to the onset of necking and beyond. The implications of observed behaviour in strain-control low-cycle fatigue tests is discussed.

ESTIMATION OF AXIAL FRETTING FATIGUE LIFE AT ELEVATED TEMPERATURES USING CRITICAL DISTANCE THEORY

2018 ◽  
Vol 25 (03) ◽  
pp. 1850067 ◽  
Author(s):  
G. H. MAJZOOBI ◽  
P. AZHDARZADEH
Keyword(s):  
Fatigue Life ◽  
Elevated Temperatures ◽  
Low Cycle Fatigue ◽  
Fretting Fatigue ◽  
Critical Distance ◽  
Fatigue Tests ◽  
Elastic Behavior ◽  
Cycle Fatigue ◽  
Al 7075 ◽  
Special Approach

Fretting fatigue life is traditionally estimated by experiment. The objective of this work is to introduce a special approach for estimation of axial fretting fatigue life at elevated temperatures from plain fatigue test based on the critical distance theory. The method uses Fatemi–Socie parameter as a multiaxial criterion to compute the stress multiaxiality on focus path. This method considers only elastic behavior for materials, and two characteristic diagrams are obtained from plain fatigue tests on two U-shaped and V-shaped notched specimens. The results showed reasonable agreement between the predictions by the proposed method and the experiments for ambient temperature. For elevated temperatures, the results indicated that the predicted fretting fatigue life was considerably overestimated in the low cycle fatigue (LCF) regime and underestimated in the high cycle fatigue (HCF) region with respect to experimental measurements. The reason for such discrepancy is believed to be due to the complex behavior of AL 7075-T6, which exhibits at elevated temperatures because of the problems such as aging, oxidation and reduction of strength.

Verification of the Estimation Methods of Strain Range in Notched Specimens Made of Mod.9Cr-1Mo Steel

2012 ◽  
Vol 134 (6) ◽  
Author(s):  
Masanori Ando ◽  
Yuichi Hirose ◽  
Shingo Date ◽  
Sota Watanabe ◽  
Yasuhiro Enuma ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Elevated Temperature ◽  
Low Cycle Fatigue ◽  
Strain Range ◽  
Fatigue Tests ◽  
Estimation Methods ◽  
Test Machine ◽  
Component Reliability ◽  
Notched Specimens ◽  
Creep Fatigue

Several methods of estimating strain range at a structural discontinuity have been developed in order to assess component reliability. In a component design at elevated temperature, estimation of strain range is required to evaluate the fatigue and creep-fatigue damage. Therefore, estimation of strain range is one of the most important issues when evaluating the integrity of a component during its lifetimes. To verify the methods of estimating strain range for discontinuous structures, low cycle fatigue tests were carried out with notched specimens. All the specimens were made of Mod.9Cr-1Mo steel, because it is a candidate material for a primary and secondary heat transport system components of Japan Sodium-cooled Fast Reactor (JSFR). Displacement control fatigue tests and thermal fatigue tests were performed by ordinary uniaxial push–pull test machine and equipment generating the thermal gradient in the notched plate by induction heating. Several notch radii were employed to vary the stress concentration level in both kinds of tests. Crack initiation and propagation process during the tests were observed by a digital microscope and the replica method to define the failure cycles. Elastic and inelastic finite element analyses were also performed to estimate strain range for predicting fatigue life. Then, these predictions were compared with the test results. Several methods such as stress redistribution locus (SRL) method, simple elastic follow-up (SEF) method, Neuber's law, and the procedures employed by elevated temperature design codes were applied. Through these comparisons, the applicability and conservativeness of these strain range estimation methods, which is the basis of the fatigue and creep-fatigue life prediction, are discussed.

scholarly journals THE EFFECT OF NOTCHES ON THE FATIGUE LIFE OF A NICKEL-BASE GAS TURBINE DISK MATERIAL

2018 ◽  
Vol 20 ◽  
pp. 34-42 ◽  
Author(s):  
Robert Eriksson ◽  
Johan Moverare ◽  
Zhe Chen ◽  
Kjell Simonsson
Keyword(s):  
Fatigue Life ◽  
Gas Turbine ◽  
Low Cycle Fatigue ◽  
Notch Root ◽  
Strain Range ◽  
Compact Tension ◽  
Critical Distance ◽  
Cycle Fatigue ◽  
Plastic Strain Range ◽  
Life Model

Gas turbine disks carry significant load under high temperatures and may be subject to fatigue failure. Disks contain several notches in the form of the fir tree blade attachments. Low cycle fatigue tests were performed on blunt notch compact tension specimens made from alloy 718. The results indicated that notch support needed to be incorporated not to cause an overly conservative life prediction. The notch support diminished as the plastic strain range decreased, indicating that notch support is only present in the low cycle fatigue regime. A critical distance approach was applied to account for the notch support. An equation relating the critical distance to the notch root stress was derived. The chosen life model was formulated in terms of a variation on the Smith–Watson–Topper (SWT) parameter. The modified SWT parameter taken at the critical distance was used in a life model calibrated for smooth specimens to successfully predict the fatigue life of notched specimens.

scholarly journals Fatigue Testing of Wearable Sensing Technologies: Issues and Opportunities

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4070
Author(s):  
Andrea Karen Persons ◽  
John E. Ball ◽  
Charles Freeman ◽  
David M. Macias ◽  
Chartrisa LaShan Simpson ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Prediction Models ◽  
Fatigue Testing ◽  
Low Cycle Fatigue ◽  
Wearable Sensors ◽  
Fatigue Tests ◽  
Proof Of Concept ◽  
Cycle Fatigue ◽  
Wearable Sensing ◽  
Failure Data

Standards for the fatigue testing of wearable sensing technologies are lacking. The majority of published fatigue tests for wearable sensors are performed on proof-of-concept stretch sensors fabricated from a variety of materials. Due to their flexibility and stretchability, polymers are often used in the fabrication of wearable sensors. Other materials, including textiles, carbon nanotubes, graphene, and conductive metals or inks, may be used in conjunction with polymers to fabricate wearable sensors. Depending on the combination of the materials used, the fatigue behaviors of wearable sensors can vary. Additionally, fatigue testing methodologies for the sensors also vary, with most tests focusing only on the low-cycle fatigue (LCF) regime, and few sensors are cycled until failure or runout are achieved. Fatigue life predictions of wearable sensors are also lacking. These issues make direct comparisons of wearable sensors difficult. To facilitate direct comparisons of wearable sensors and to move proof-of-concept sensors from “bench to bedside,” fatigue testing standards should be established. Further, both high-cycle fatigue (HCF) and failure data are needed to determine the appropriateness in the use, modification, development, and validation of fatigue life prediction models and to further the understanding of how cracks initiate and propagate in wearable sensing technologies.

The Use of Strain Energy and Fracture Correlation to Determine Life Expectancy for Notched Components

2009 ◽  
Author(s):  
Onome Scott-Emuakpor ◽  
Tommy George ◽  
Charles Cross ◽  
M.-H. Herman Shen
Keyword(s):  
Fatigue Life ◽  
Stress Concentration ◽  
Cross Section ◽  
Strain Energy ◽  
Notch Root ◽  
Stress Gradient ◽  
Strain Curve ◽  
Experimental Results ◽  
Cyclic Process ◽  
Notched Components

An energy-based method for predicting fatigue life of half-circle notched specimens, based on the nominal applied stress amplitude, has been developed. This developed method is based on the understanding that the total strain energy dissipated during a monotonic fracture and a cyclic process is the same material property, where the density of each can be determined by measuring the area underneath the monotonic true stress-strain curve and measuring the sum of the area within each Hysteresis loop in the cyclic process, respectively. Using this understanding, the criterion for determining fatigue life prediction of half-circle notched components is constructed by incorporating the stress gradient effect through the notch root cross-section. Though fatigue at a notch root is a local phenomenon, evaluation of the stress gradient through the notch root cross-section is essential for incorporating this method into finite element analysis minimum potential energy process. The validation of this method was carried out by comparison with both notched and unnnotched experimental fatigue life of Aluminum 6061-T6 (Al 6061-T6) specimens under tension/compression loading at the theoretical notch fatigue stress concentration factor of 1.75. The comparison initially showed a slight deviation between prediction and experimental results. This led to the analysis of strain energy density per cycle up to failure, and an improved Hysteresis representation for the energy-based prediction analysis. With the newly developed Hysteresis representation, the energy-based prediction comparison shows encouraging agreement with unnotched experimental results and a theoretical notch stress concentration value.

scholarly journals Impact of Temperature on Low-Cycle Fatigue Characteristics of the HR6W Alloy

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 6741
Author(s):  
Grzegorz Junak ◽  
Anżelina Marek ◽  
Michał Paduchowicz
Keyword(s):  
Fatigue Life ◽  
Room Temperature ◽  
Low Cycle Fatigue ◽  
Fatigue Tests ◽  
Total Strain ◽  
Cycle Fatigue ◽  
Fatigue Characteristics

This paper presents the results of tests conducted on the HR6W (23Cr-45Ni-6W-Nb-Ti-B) alloy under low-cycle fatigue at room temperature and at 650 °C. Fatigue tests were carried out at constant values of the total strain ranges. The alloy under low-cycle fatigue showed cyclic strengthening both at room temperature and at 650 °C. The degree of HR6W strengthening described by coefficient n’ was higher at higher temperatures. At the same time, its fatigue life Nf at room temperature was, depending on the range of total strain adopted in the tests, several times higher than observed at 650 °C.

Low Cycle Fatigue Properties of FGH720Li Superalloy

2021 ◽  
Vol 1035 ◽  
pp. 292-296
Author(s):  
Zi Chao Peng ◽  
Jun Ying Sheng ◽  
Xu Qing Wang ◽  
Yue Tang
Keyword(s):  
Fatigue Life ◽  
Powder Metallurgy ◽  
Applied Stress ◽  
Low Cycle Fatigue ◽  
Influencing Factor ◽  
Fatigue Tests ◽  
Fatigue Properties ◽  
Nickel Base Superalloy ◽  
Loading Frequency ◽  
Cycle Fatigue

Low cycle fatigue (LCF) properties of a powder metallurgy(PM) nickel base superalloy FGH720Li were systematically studied in this work, including smooth LCF and notched LCF tested at various temperatures and different stress. The relationship between the fatigue life and applied stress was analyzed both for smooth fatigue and notch fatigue tests. The effects of loading frequency and stress ratio on LCF behavior were also studied. As an important influencing factor of the fatigue life in powder metallurgy superalloy, the effect of inclusions on LCF life was also investigated. The results showed that the fatigue properties of FGH720Li alloy was excellent, when tested at the temperature of 450°C and applied stress of 1230MPa, the fatigue life could exceed 5×104 cycles. When tested at 650°C and 1150MPa, the average fatigue life was still beyond 2×105 cycles.

Sign in / Sign up

Export Citation Format

Share Document