scholarly journals A multi-criteria decision making approach for public lighting system selection

2018 ◽  
Vol 184 ◽  
pp. 04006 ◽  
Author(s):  
Maria Cristea ◽  
Radu Adrian Tîrnovan ◽  
Ciprian Cristea ◽  
Constantin Sorin Pică ◽  
Cristian Făgărășan
Keyword(s):  
Large Scale ◽  
Software Tools ◽  
Technical Solution ◽  
Lighting System ◽  
Street Lighting ◽  
Lighting Technology ◽  
Technical Performance ◽  
The One ◽  
Technical Solutions ◽  
System Selection

There are numerous and different ways to design an energy efficient street lighting system, but not always the best technical solution is the optimal economic solution as well. In this paper, we used two distinct software tools in order to obtain the optimal technical and economic solution for selecting street lighting technology. The first software used was DIALux, which is frequently applied in this field, assisting designers in choosing the most appropriate electrical installations and evaluating the technical performance of the chosen solutions. This tool determined the street lighting system variants for which there are predetermined configurations, so that the lighting parameters obtained are in accordance with the normative requirements of the lighting classes in which the roadways are included. Different ways of locating the luminaires and other parameters were changed to reach the best version that meets the qualitative requirements of the lighting technology. The second software used was the one developed by the authors, based on ELECTRE III method, which evaluated the technical solutions returned by DIALux against several criteria, taking into account the designer’s preferences and constraints. The optimal technical and economic solution was obtained after ranking the variants by their performance at each criterion. The simulation experiment and the results returned suggested that the combination of the two software tools is comprehensive and effective and it can be used in this type of decisions at large scale.

scholarly journals A Low-Power and Low Cost Smart Streetlight System Based on Internet of Things Technology

2021 ◽  
Author(s):  
Jingjing Zhang ◽  
Weihua Zeng ◽  
Shengli Hou ◽  
Yuqi Chen ◽  
Linyan Guo ◽  
...  
Keyword(s):  
Large Scale ◽  
Energy Savings ◽  
Smart Cities ◽  
Low Cost ◽  
Electricity Consumption ◽  
Shanxi Province ◽  
Lighting System ◽  
Street Lighting ◽  
Real Time Traffic ◽  
Internet Of Things Technology

Abstract Street lighting, as the most essential and universal component of the urban lighting system, accounts for a large portion of public electricity usage. Therefore, improving street lamps working efficiency is vital for energy savings. This paper demonstrates the design of a smart street lighting system supported by the combination of NB-IoT and LoRa communication technology. By adopting an optimized street lamp control algorithm, the system can realize the automatic control of street lights according to the real-time traffic flow information. This system has been installed on Luyang Avenue, Lucheng City, Shanxi Province, China in May 2019. It managed to reduce the electricity consumption in this region significantly in June 2019, which was 18% lower than that in April 2019 and 19.7% lower than that in June 2018. By illustrating the unique advantages of this system in energy savings and cost reduction, this paper displays its potential for further application in the construction of smart cities on a large scale.

First grammar books in the Habsburg Monarchy: individual initiative and regulatory interference by the state (1760s–1770s)

2020 ◽  
Vol 2019 (2 (11)) ◽  
pp. 137-157
Author(s):  
Olga V. Khavanova ◽  
Keyword(s):  
Eighteenth Century ◽  
State Policy ◽  
Large Scale ◽  
Language Use ◽  
Linguistic Diversity ◽  
Mother Tongue ◽  
German Language ◽  
Habsburg Monarchy ◽  
Private Initiative ◽  
The One

The second half of the eighteenth century in the lands under the sceptre of the House of Austria was a period of development of a language policy addressing the ethno-linguistic diversity of the monarchy’s subjects. On the one hand, the sphere of use of the German language was becoming wider, embracing more and more segments of administration, education, and culture. On the other hand, the authorities were perfectly aware of the fact that communication in the languages and vernaculars of the nationalities living in the Austrian Monarchy was one of the principal instruments of spreading decrees and announcements from the central and local authorities to the less-educated strata of the population. Consequently, a large-scale reform of primary education was launched, aimed at making the whole population literate, regardless of social status, nationality (mother tongue), or confession. In parallel with the centrally coordinated state policy of education and language-use, subjects-both language experts and amateur polyglots-joined the process of writing grammar books, which were intended to ease communication between the different nationalities of the Habsburg lands. This article considers some examples of such editions with primary attention given to the correlation between private initiative and governmental policies, mechanisms of verifying the textbooks to be published, their content, and their potential readers. This paper demonstrates that for grammar-book authors, it was very important to be integrated into the patronage networks at the court and in administrative bodies and stresses that the Vienna court controlled the process of selection and financing of grammar books to be published depending on their quality and ability to satisfy the aims and goals of state policy.

The Green New Deal

2019 ◽  
Author(s):  
Robert C. Hockett
Keyword(s):  
New Deal ◽  
Large Scale ◽  
Public Investment ◽  
Climate Science ◽  
Time Frame ◽  
White Paper ◽  
Good News ◽  
Carbon Neutrality ◽  
The One ◽  
In Virtue Of

This white paper lays out the guiding vision behind the Green New Deal Resolution proposed to the U.S. Congress by Representative Alexandria Ocasio-Cortez and Senator Bill Markey in February of 2019. It explains the senses in which the Green New Deal is 'green' on the one hand, and a new 'New Deal' on the other hand. It also 'makes the case' for a shamelessly ambitious, not a low-ball or slow-walked, Green New Deal agenda. At the core of the paper's argument lies the observation that only a true national mobilization on the scale of those associated with the original New Deal and the Second World War will be up to the task of comprehensively revitalizing the nation's economy, justly growing our middle class, and expeditiously achieving carbon-neutrality within the twelve-year time-frame that climate science tells us we have before reaching an environmental 'tipping point.' But this is actually good news, the paper argues. For, paradoxically, an ambitious Green New Deal also will be the most 'affordable' Green New Deal, in virtue of the enormous productivity, widespread prosperity, and attendant public revenue benefits that large-scale public investment will bring. In effect, the Green New Deal will amount to that very transformative stimulus which the nation has awaited since the crash of 2008 and its debt-deflationary sequel.

Technical solutions envisaged in managing solids in combined sewer networks

1996 ◽  
Vol 33 (9) ◽  
pp. 237-244 ◽  
Author(s):  
Ghassan Chebbo ◽  
Dominique Laplace ◽  
André Bachoc ◽  
Yves Sanchez ◽  
Benoit Le Guennec
Keyword(s):  
Large Scale ◽  
Suspended Solids ◽  
Drainage Area ◽  
Bed Load ◽  
Urban Drainage ◽  
Combined Sewer ◽  
Wet Weather ◽  
Technical Solutions ◽  
Dry Weather Flow ◽  
Sewer Networks

Solids in combined sewer networks represent two important technical questions: - the clogging of man-entry sewers, and - pollution in urban wet weather discharges, whose main vectors are generally suspended solids. In this paper, we shall present first, curative technical solutions which avoid or remove deposits in man-entry sewers. We shall discuss the partial extraction of the largest solids; selective trapping of bed load solids, which form deposits; and the displacement of deposits using dry weather flow flushing waves. We shall then examine technical solutions to control pollution in urban wet weather discharges. This will show that decantation is an efficient means of fighting pollution. However, it is not always feasible because it involves large scale investments. Complementary methods should, therefore, be developed and used at different points in the water's passage through an urban drainage area.

“Community Interests” and the Role of International Law in the Creation of a Global Market for Agricultural Land

2018 ◽  
Author(s):  
Jochen von Bernstorff
Keyword(s):  
International Law ◽  
Large Scale ◽  
Agricultural Land ◽  
Food Sovereignty ◽  
Global Market ◽  
Negative Consequences ◽  
Cultural Rights ◽  
Land Grab ◽  
Large Scale Land ◽  
The One

The chapter explores the notion of “community interests” with regard to the global “land-grab” phenomenon. Over the last decade, a dramatic increase of foreign investment in agricultural land could be observed. Bilateral investment treaties protect around 75 per cent of these large-scale land acquisitions, many of which came with associated social problems, such as displaced local populations and negative consequences for food security in Third World countries receiving these large-scale foreign investments. Hence, two potentially conflicting areas of international law are relevant in this context: Economic, social, and cultural rights and the principles of permanent sovereignty over natural resources and “food sovereignty” challenging large-scale investments on the one hand, and specific norms of international economic law stabilizing them on the other. The contribution discusses the usefulness of the concept of “community interests” in cases where the two colliding sets of norms are both considered to protect such interests.

scholarly journals State Management for Cloud-Native Applications

Electronics ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 423
Author(s):  
Márk Szalay ◽  
Péter Mátray ◽  
László Toka
Keyword(s):  
Large Scale ◽  
Distributed Databases ◽  
Access Time ◽  
Replica Placement ◽  
State Management ◽  
Placement Decisions ◽  
Dynamic Replication ◽  
Cloud Databases ◽  
Placement Algorithm ◽  
The One

The stateless cloud-native design improves the elasticity and reliability of applications running in the cloud. The design decouples the life-cycle of application states from that of application instances; states are written to and read from cloud databases, and deployed close to the application code to ensure low latency bounds on state access. However, the scalability of applications brings the well-known limitations of distributed databases, in which the states are stored. In this paper, we propose a full-fledged state layer that supports the stateless cloud application design. In order to minimize the inter-host communication due to state externalization, we propose, on the one hand, a system design jointly with a data placement algorithm that places functions’ states across the hosts of a data center. On the other hand, we design a dynamic replication module that decides the proper number of copies for each state to ensure a sweet spot in short state-access time and low network traffic. We evaluate the proposed methods across realistic scenarios. We show that our solution yields state-access delays close to the optimal, and ensures fast replica placement decisions in large-scale settings.

scholarly journals Risk Assessment Framework to Avoid Serial Failure for New Technical Solutions Applied to the Construction of a CLT Structure Resilient to Climate

Buildings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 247
Author(s):  
Charlotte Svensson Tengberg ◽  
Carl-Eric Hagentoft
Keyword(s):  
Risk Assessment ◽  
Success Factors ◽  
Real Life ◽  
Qualitative Assessment ◽  
Technical Solution ◽  
Functional Requirements ◽  
Assessment Framework ◽  
Construction Period ◽  
Design Build ◽  
Technical Solutions

Design-build contractors are challenged with the task of minimizing failure risks when introducing new technical solutions or adapting technical solutions to new conditions, e.g., climate change. They seem to have a disproportional trust in suppliers and their reference cases and might not have adequate resources or methodologies for sufficient evaluation. This creates the potential for serial failures to spread in the construction industry. To mitigate this, it was suggested that a predefined risk assessment framework should be introduced with the aim of providing a prequalification and requirements for the use of the technical solution. The objectives of this paper are to develop a comprehensive risk assessment framework and to explore the framework’s potential to adequately support the design-build contractor’s decisions. The framework uses qualitative assessment, relying on expert workshops and quantitative assessments, with a focus on simulation and probabilities. Tollgates are used to communicate risk assessments to the contractor. The framework is applied to a real-life case study of construction with a CLT-structure for a Swedish design-build contractor, where exposure to precipitation during construction is a key issue. In conclusion, the chosen framework was successful in a design-build contractor context, structuring the process and identifying difficulties in achieving the functional requirements concerning moisture. Three success factors were: documentation and communication, expert involvement, and the use of tollgates. Recommendations to the design-build contractor on construction of CLT structure are to keep construction period short and to use full weather protection on site.

scholarly journals Constructing Large-Scale Genetic Maps Using an Evolutionary Strategy Algorithm

Genetics ◽  
2003 ◽  
Vol 165 (4) ◽  
pp. 2269-2282
Author(s):  
D Mester ◽  
Y Ronin ◽  
D Minkov ◽  
E Nevo ◽  
A Korol
Keyword(s):  
Discrete Optimization ◽  
High Performance ◽  
Large Scale ◽  
Simulated Data ◽  
Real Data ◽  
Genetic Maps ◽  
Chromosome 1 ◽  
Evolutionary Strategy ◽  
Group A ◽  
The One

Abstract This article is devoted to the problem of ordering in linkage groups with many dozens or even hundreds of markers. The ordering problem belongs to the field of discrete optimization on a set of all possible orders, amounting to n!/2 for n loci; hence it is considered an NP-hard problem. Several authors attempted to employ the methods developed in the well-known traveling salesman problem (TSP) for multilocus ordering, using the assumption that for a set of linked loci the true order will be the one that minimizes the total length of the linkage group. A novel, fast, and reliable algorithm developed for the TSP and based on evolution-strategy discrete optimization was applied in this study for multilocus ordering on the basis of pairwise recombination frequencies. The quality of derived maps under various complications (dominant vs. codominant markers, marker misclassification, negative and positive interference, and missing data) was analyzed using simulated data with ∼50-400 markers. High performance of the employed algorithm allows systematic treatment of the problem of verification of the obtained multilocus orders on the basis of computing-intensive bootstrap and/or jackknife approaches for detecting and removing questionable marker scores, thereby stabilizing the resulting maps. Parallel calculation technology can easily be adopted for further acceleration of the proposed algorithm. Real data analysis (on maize chromosome 1 with 230 markers) is provided to illustrate the proposed methodology.

Sign in / Sign up

Export Citation Format

Share Document