scholarly journals Laboratory Testing of Self-Healing Polymer Modified Asphalt Mixtures Containing Recycled Asphalt Materials (RAP/RAS)

2019 ◽  
Vol 271 ◽  
pp. 03003
Author(s):  
Sharareh Shirzad ◽  
Marwa M. Hassan ◽  
Max A. Aguirre ◽  
Samuel Cooper ◽  
Louay N. Mohammad ◽  
...  
Keyword(s):  
Uv Light ◽  
Light Exposure ◽  
Asphalt Mixtures ◽  
Self Healing ◽  
Test Results ◽  
Recycled Asphalt ◽  
Cracking Performance ◽  
Specimen Test ◽  
Low Temperature Cracking ◽  
Healing Temperature

The objective of this study was to evaluate the efficiency of an innovative light-induced self-healing polymers in enhancing the durability of asphalt mixtures and improving its self-healing properties. Mixtures were prepared using two different binders, with and without recycled materials, and self-healing polymer. Results showed that the addition of recycled asphalt material to mixtures prepared with an unmodified binder negatively affected the healing recovery at room temperature. Furthermore, Self-healing properties of the mixtures were improved by increasing the healing temperature. The addition of 5% self-healing polymer to the control mixture, followed by UV light exposure resulted in an increase in self-healing properties of the mixtures prepared with PG 67-22 binder. Semi-Circular Bending (SCB) test results showed that the incorporation of self-healing polymer and 48 h of UV light exposure improved the cracking resistance. Loaded-Wheel Test (LWT) results showed that the self-healing polymer caused an increase in the rut depth of the samples prepared with an unmodified binder. However, the final rut depth was less than the acceptable rutting performance. Thermal-Stress Restrained Specimen Test (TSRST) test results showed that self-healing polymer improved the low temperature cracking performance of the mixtures.

scholarly journals Influence of Selected Warm Mix Asphalt Additives on Cracking Susceptibility of Asphalt Mixtures

Materials ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 202 ◽  
Author(s):  
Marcin Stienss ◽  
Cezary Szydlowski
Keyword(s):  
Low Temperature ◽  
Warm Mix Asphalt ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Test Results ◽  
Specimen Test ◽  
Low Temperature Cracking ◽  
Long Term Performance ◽  
Term Performance

Warm mix asphalt (WMA) has been widely accepted as a future asphalt paving technology. Besides clear advantages, there are still some concerns regarding durability and long-term performance of pavements made with this type of asphalt mixtures. One of the most important issues is low temperature behaviour of WMA because certain additives used for temperature reduction can affect bitumen properties. This paper presents the evaluation of low-temperature properties of laboratory-produced asphalt concrete for wearing course with selected WMA additives. One type of bitumen with paving grade 50/70 and five WMA additives of different nature (organic, surface tension reducer and combination of both) were used in this study. The production and compaction temperature of mixtures containing WMA additives was 25 °C lower in comparison with the temperature of the reference mix. To assess the susceptibility of WMA to low-temperature cracking, Semi-Circular Bending (SCB) and Thermal Stress Restrained Specimen Test (TSRST) were used. Supplementary rating was made by analysing Bending Beam Rheometer (BBR) test results of asphalt binders.

Low-Temperature Cracking of Recycled Asphalt Mixtures

2012 ◽  
pp. 1261-1270 ◽  
Author(s):  
N. Tapsoba ◽  
C. Sauzéat ◽  
H. Benedetto ◽  
H. Baaj ◽  
M. Ech
Keyword(s):  
Low Temperature ◽  
Asphalt Mixtures ◽  
Recycled Asphalt ◽  
Low Temperature Cracking

Influence Analysis of Performance on Sasobit Warm Mix Asphalt with Salinity

2014 ◽  
Vol 490-491 ◽  
pp. 138-141
Author(s):  
Kun Wang ◽  
Jing Ya Chen ◽  
Xiang Qu
Keyword(s):  
Low Temperature ◽  
Environmental Benefits ◽  
Fatigue Performance ◽  
Test Results ◽  
Temperature Performance ◽  
Cracking Performance ◽  
Low Temperature Cracking ◽  
Short And Long Term ◽  
Analysis Of Performance

Sasobit warm mix drainage asphalt pavement has become increasingly popular due to its environmental benefits and comfortable using effect. However, test results show that its low-temperature and anti-fatigue performance have a certain degree of reduced. To improve the performance of asphalt four different doses (1%, 3%, 5% and 7%) of salt are added to the Sasobit asphalt. Laboratory tests were used to simulate short and long term aging asphalt in the process of construction and using pavement. A series of binder tests including bending beam rheometer (BBR), dynamic shear rheometer (DSR) and Brookfield viscosity tests were conducted. Results show an increase of rutting performance for warm mix binders with Sasobit while asphalt with salt has similar high temperature performance to original asphalt. Unlike Sasobit which has a decrease of cracking performance for asphalt at low-temperature, salinity can greatly improve the Low-temperature performance. And the low-temperature cracking performance and anti-fatigue performance presents a tendency of climbing up first and then declining with the increase of salinity. The figure of viscosity-temperature curve shows that the optimum of salinity is 5%.Further more, asphalt with Sasobit and salt can gain better performance and same mixing and compaction effect in lower 20°C than hot mix asphalt without it.

Performance of Asphalt Rejuvenators in Hot-Mix Asphalt Containing Recycled Asphalt Shingles

2017 ◽  
Vol 2633 (1) ◽  
pp. 108-116 ◽  
Author(s):  
Max A. Aguirre ◽  
Marwa M. Hassan ◽  
Sharareh Shirzad ◽  
Louay N. Mohammad ◽  
Samuel B. Cooper
Keyword(s):  
Hot Mix Asphalt ◽  
Permanent Deformation ◽  
Fatigue Cracking ◽  
Strain Energy Release ◽  
Asphalt Mixtures ◽  
Bending Test ◽  
Test Results ◽  
Recycled Asphalt ◽  
Recycled Asphalt Shingles ◽  
Asphalt Shingles

The use of recycled asphalt shingles (RAS) in asphalt paving construction represents a sustainable approach to reduce virgin material consumption and negative environmental effects, as well as the cost of asphalt pavement. However, many challenges are yet to be addressed about the use of RAS in paving applications. This study evaluated the effect of the incorporation of postconsumer waste shingles and rejuvenators on the performance of hot-mix asphalt. Four asphalt rejuvenators—one bio-oil and three synthetic oils—were evaluated. A set of laboratory tests was conducted to characterize the performance of asphalt mixtures against permanent deformation and fatigue cracking. The addition of 5% RAS showed an improvement in permanent deformation when compared with a conventional mixture with no RAS. Yet the addition of asphalt rejuvenator products slightly decreased the performance against permanent deformation. On the basis of Hamburg wheel-tracking device test results, the addition of RAS did not adversely affect moisture resistance. Yet semicircular bending test results showed that the asphalt mixtures that contained asphalt rejuvenators had a lower critical strain energy release rate than the minimum threshold value (0.5 kJ/m2), which indicated a greater susceptibility to intermediate-temperature cracking.

scholarly journals Laboratory Evaluation on Performance of Fiber-Modified Asphalt Mixtures Containing High Percentage of RAP

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Yuefeng Zhu ◽  
Yanwei Li ◽  
Chundi Si ◽  
Xiaote Shi ◽  
Yaning Qiao ◽  
...  
Keyword(s):  
Low Temperature ◽  
Asphalt Binder ◽  
Temperature Stability ◽  
Asphalt Mixtures ◽  
Self Healing ◽  
Test Results ◽  
Moisture Susceptibility ◽  
Modified Asphalt ◽  
Modified Binders ◽  
Different Types

In recent years, the significant demand for sustainable paving materials has led to a rapid increase in the utilization of reclaimed asphalt pavement (RAP) materials. When RAP is mixed with virgin asphalt concrete, particularly when its percentage is high, performance of the binder and asphalt concrete can be adversely affected. For this reason, different types of additives need to be identified and evaluated beforehand to mitigate the adverse effects. In this study, different types of fiber materials were identified and selected as binder/mixture additives, including lignin fiber (LF), polyester fiber (PF), and basalt fiber (BF). Various samples of fiber-modified binders and asphalt mixtures with different RAP contents (0%, 20%, and 40%) were prepared and were evaluated using two sets of laboratory testing: (i) dynamic shear rheometer (DSR) and bending beam rheometer (BBR) tests were performed to study the rheological properties of fiber-modified binders; (ii) the wheel tracking test, bending creep test, moisture susceptibility test, fatigue test, and self-healing fatigue test were conducted to characterize the laboratory properties of fiber-modified RAP mixtures. Test results for the modified binders show that the BF-modified binder has the greatest positive effect on the high-temperature performance of the asphalt binder, followed by PF- and LF-modified binders. However, the virgin asphalt shows the best low-temperature property than the fiber-modified asphalt binder. Test results for the whole RAP mixtures show that all fibers have a significant effect on the properties (including high- and low-temperature stability, moisture susceptibility, fatigue, and self-healing ability) of RAP mixtures. Among them, adding BF shows the greatest improvement in high-temperature stability, fatigue resistance, and self-healing ability of RAP mixtures. LF is found to significantly enhance low-temperature properties, and PF can greatly improve the resistance to moisture damage of RAP mixtures. For high percentage of RAP using on sites, adding multiple additives may further enhance its durability.

Prediction of Low-Temperature Cracking of Asphalt Concrete Mixtures with Thermal Stress Restrained Specimen Test Results

1996 ◽  
Vol 1545 (1) ◽  
pp. 50-58 ◽  
Author(s):  
Hannele K. Zubeck ◽  
Ted S. Vinson
Keyword(s):  
Thermal Stress ◽  
Low Temperature ◽  
Asphalt Concrete ◽  
Probabilistic Model ◽  
Deterministic Model ◽  
Crack Spacing ◽  
Test Results ◽  
Concrete Mixtures ◽  
Specimen Test ◽  
Low Temperature Cracking

A deterministic model and a probabilistic model were developed to predict low-temperature crack spacing as a function of time using thermal stress restrained specimen test results, pavement thickness and bulk density, pavement restraint conditions, and air temperature. The effect of aging on pavement properties was incorporated in the models by predicting the field aging with long-term oven aging treatment in the laboratory. The calculation of the crack spacing is based on the theory that the pavement slab cracks when the pavement temperature reaches the cracking temperature of the mixture and the slab is fully restrained. The deterministic model predicts crack spacing with time, whereas the probabilistic model predicts crack spacing and its variation with time and yields the reliability of the design with regard to a minimum acceptable crack spacing criterion defined by road authorities. The probabilistic model is recommended for use in predicting the low-temperature cracking of asphalt concrete mixtures.

Sign in / Sign up

Export Citation Format

Share Document