scholarly journals Design of 3D printed smart material compatible hand prosthesis

2020 ◽  
Vol 318 ◽  
pp. 01039
Author(s):  
Abdalla M. Omar ◽  
Mohamed Hassan
Keyword(s):  
Range Of Motion ◽  
Upper Limb ◽  
Degrees Of Freedom ◽  
Low Cost ◽  
Limited Range ◽  
Shape Morphing ◽  
Limited Range Of Motion ◽  
Upper Limb Prostheses ◽  
Proposed Model ◽  
3D Printed

Every year there are about 3500-5200 people suffering from upper limb amputations, most of which are wrist disarticulation and transcarpal. This paper investigates current upper limb prostheses and presents the disadvantages of current prostheses, including limited degrees of freedom (DOF), limited range of motion, weight, customizability, and appearance. The proposed design is the first stage of a series of papers that proposes designs that are compatible with shape morphing materials. The use of these materials as actuators allows the development and design of more advanced upper limb prostheses. Therefore, the prosthesis is modelled as needed for patients with transcarpal/wrist disarticulation amputations. The proposed model has 27 degrees of freedom (DOF), reduced weight, low cost, improved appearance, and is printable to fit.

Simulated Compensatory Motion of Transradial Prostheses

2008 ◽  
Author(s):  
Derek Lura ◽  
Rajiv Dubey ◽  
Stephanie L. Carey ◽  
M. Jason Highsmith
Keyword(s):  
Range Of Motion ◽  
Shoulder Joint ◽  
Degrees Of Freedom ◽  
Biomechanical Model ◽  
Elbow Flexion ◽  
Limited Range ◽  
Joint Movement ◽  
Range Of Movement ◽  
Limited Range Of Motion ◽  
Compensatory Motion

The prostheses used by the majority of persons with hand/arm amputations today have a very limited range of motion. Transradial (below the elbow) amputees lose the three degrees of freedom provided by the wrist and forearm. Some myoeletric prostheses currently allow for forearm pronation and supination (rotation about an axis parallel to the forearm) and the operation of a powered prosthetic hand. Older body-powered prostheses, incorporating hooks and other cable driven terminal devices, have even fewer degrees of freedom. In order to perform activities of daily living (ADL), a person with amputation(s) must use a greater than normal range of movement from other body joints to compensate for the loss of movement caused by the amputation. By studying the compensatory motion of prosthetic users we can understand the mechanics of how they adapt to the loss of range of motion in a given limb for select tasks. The purpose of this study is to create a biomechanical model that can predict the compensatory motion using given subject data. The simulation can then be used to select the best prosthesis for a given user, or to design prostheses that are more effective at selected tasks, once enough data has been analyzed. Joint locations necessary to accomplish the task with a given configuration are calculated by the simulation for a set of prostheses and tasks. The simulation contains a set of prosthetic configurations that are represented by parameters that consist of the degrees of freedom provided by the selected prosthesis. The simulation also contains a set of task information that includes joint constraints, and trajectories which the hand or prosthesis follows to perform the task. The simulation allows for movement in the wrist and forearm, which is dependent on the prosthetic configuration, elbow flexion, three degrees of rotation at the shoulder joint, movement of the shoulder joint about the sternoclavicular joint, and translation and rotation of the torso. All joints have definable restrictions determined by the prosthesis, and task.

scholarly journals Design of a Spherically Actuated Human Interaction Robot Head

2012 ◽  
Vol 134 (5) ◽  
Author(s):  
Nevan C. Hanumara ◽  
Alexander H. Slocum ◽  
Takeshi Mitamura
Keyword(s):  
Range Of Motion ◽  
Degrees Of Freedom ◽  
Limited Range ◽  
Human Interaction ◽  
The Other ◽  
Specific Information ◽  
Prior Art ◽  
Limited Range Of Motion ◽  
Robot Head

This paper presents the development of a mechanism for actuating a sphere holonomically about 3 degrees of freedom (DOF). The target application is a robot head for mounting inside a vehicle to provide a driver with companionship, location specific information, and other assistance, via head motions in conjunction with auditory communication. Prior art is reviewed and two designs are presented: One mechanism is located below the sphere and provides an unlimited range of motion (ROM), and the other is contained entirely within the sphere but has a limited range of motion. The latter is stable and easily mounted, provides a clean appearance, and is particularly suited to human interaction applications.

Control Algorithms for 3-DoF Handheld Robotic Devices Used in Orthopedic Surgery

2019 ◽  
Vol 04 (02) ◽  
pp. 1950002
Author(s):  
Martin Klemm ◽  
Uwe D. Hanebeck ◽  
Harald Hoppe
Keyword(s):  
Range Of Motion ◽  
Orthopedic Surgery ◽  
Degrees Of Freedom ◽  
Limited Range ◽  
Robotic Systems ◽  
Control Algorithms ◽  
End Effector ◽  
Multiple Degrees Of Freedom ◽  
Limited Range Of Motion ◽  
Robotic Devices

Nowadays, robotic systems are an integral part of many orthopedic interventions. Stationary robots improve the accuracy but also require adapted surgical workflows. Handheld robotic devices (HHRDs), however, are easily integrated into existing workflows and represent a more economical solution. Their limited range of motion is compensated by the dexterity of the surgeon. This work presents control algorithms for HHRDs with multiple degrees of freedom (DOF). These algorithms protect pre- or intraoperatively defined regions from being penetrated by the end effector (e.g., a burr) by controlling the joints as well as the device’s power. Accuracy tests on a stationary prototype with three DOF show that the presented control algorithms produce results similar to those of stationary robots and much better results than conventional techniques. This work presents novel and innovative algorithms, which work robustly, accurately, and open up new opportunities for orthopedic interventions.

scholarly journals A Concept Design of an Adaptive Tendon Driven Mechanism for Active Soft Hand Orthosis

Proceedings ◽  
2020 ◽  
Vol 64 (1) ◽  
pp. 21
Author(s):  
Bruno Lourenço ◽  
Vitorino Neto ◽  
Rafhael de Andrade
Keyword(s):  
Degrees Of Freedom ◽  
Low Cost ◽  
Vital Role ◽  
Dorsal Side ◽  
Concept Design ◽  
Cord Injury ◽  
3D Printed ◽  
Biomechanical Constraints ◽  
Active Orthosis

The Hands exert a vital role in the simplest to most complex daily tasks. Losing the ability to make hand movements, which is usually caused by spinal cord injury or stroke, dramatically impacts the quality of life. In order to counteract this problem, several assisting devices have been proposed, but they still present several usage limitations. The marketable orthoses are generally either the static type or over-expensive active orthosis that cannot perform the same degrees of freedom (DoF) that a hand can do. This paper presents a conceptual design of a tendon-driven mechanism for hand’s active orthosis. This study is a part of an effort to develop an effective and low-cost hand’s orthosis for people with hand paralysis. The tendon design proposed was thought to comply with some requisitions such as lightness and low volume, as well as fit with the biomechanical constraints of the hand joints to enable a comfortable use. The mechanism employs small cursors on the phalanges to allow the tendons to run on the dorsal side and by both sides of the fingers, allowing 2 DoF for each finger, and one extra tendon enlarges the hands’ adduction nuances. With this configuration, it is simple enough to execute the flexion and extension movements, which are the most used movements in daily actives, using one single DC actuator for one DoF to reduce manufacturing costs, or with more DC actuators to enable more natural hand coordination. This system of actuation is suitable to create soft exoskeletons for hands easily embedded into 3D printed parts, which could be merged over statics thermoplastic orthosis. The final orthosis design allows dexterous finger movements and force to grasp objects and perform tasks comfortably.

scholarly journals Kraken: A wirelessly controlled octopus-like hybrid robot utilizing stepper motors and fishing line artificial muscle for grasping underwater

2021 ◽  
Author(s):  
Yara Almubarak ◽  
Michelle Schmutz ◽  
Miguel Perez ◽  
Shrey Shah ◽  
Yonas Tadesse
Keyword(s):  
Degrees Of Freedom ◽  
Low Cost ◽  
Arm Movement ◽  
Artificial Muscle ◽  
Aquatic Life ◽  
Stepper Motors ◽  
3D Printed ◽  
Arm Motion ◽  
Hybrid Actuation ◽  
Underwater Exploration

Abstract Underwater exploration or inspection requires suitable robotic systems capable of maneuvering, manipulating objects, and operating untethered in complex environmental conditions. Traditional robots have been used to perform many tasks underwater. However, they have limited degrees of freedom, manipulation capabilities, portability, and have disruptive interactions with aquatic life. Research in soft robotics seeks to incorporate ideas of the natural flexibility and agility of aquatic species into man-made technologies to improve the current capabilities of robots using biomimetics. In this paper, we present a novel design, fabrication, and testing results of an underwater robot known as Kraken that has tentacles to mimic the arm movement of an octopus. To control the arm motion, Kraken utilizes a hybrid actuation technology consisting of stepper motors and twisted and a coiled fishing line polymer muscle (TCP FL ). TCPs are becoming one of the promising actuation technologies due to their high actuation stroke, high force, light weight, and low cost. We have studied different arm stiffness configurations of the tentacles tailored to operate in different modalities (curling, twisting, and bending), to control the shape of the tentacles and grasp irregular objects delicately. Kraken uses an onboard battery, a wireless programmable joystick, a buoyancy system for depth control, all housed in a three-layer 3D printed dome-like structure. Here, we present Kraken fully functioning underwater in an Olympic-size swimming pool using its servo actuated tentacles and other test results on the TCP FL actuated tentacles in a laboratory setting. This is the first time that an embedded TCP FL actuator within elastomer has been proposed for the tentacles of an octopus-like robot along with the performance of the structures. Further, as a case study, we showed the functionality of the robot in grasping objects underwater for field robotics applications.

Traumatic bilateral posterior dislocation of the shoulder: a case report

Open Medicine ◽  
2013 ◽  
Vol 8 (6) ◽  
pp. 810-813
Author(s):  
C. Garving ◽  
T. Dienstknecht ◽  
K. Horst ◽  
M. Pishnamaz ◽  
P. Kobbe ◽  
...  
Keyword(s):  
Range Of Motion ◽  
Shoulder Dislocation ◽  
Limited Range ◽  
Clinical Suspicion ◽  
Posterior Dislocation ◽  
X Rays ◽  
Posterior Shoulder Dislocation ◽  
Limited Range Of Motion ◽  
Posterior Shoulder ◽  
Bilateral Posterior Shoulder Dislocation

AbstractIntroduction. Bilateral posterior dislocation of the shoulder is a rare injury, accounted for about 2–5% of all shoulder dislocations. Main courses are electrical shock, epilepsy or extreme trauma with uncontrolled muscle forces. We report about a case of bilateral posterior shoulder dislocation without additional fractures but with a concomitant acromioclavicular joint dislocation. Case presentation. A 46-year-old Caucasian motorcyclist presented to our facility after a fall on slippery ground. He claimed pain in both shoulders with limited range of motion. The initial X-rays were inconclusive, clinical examination showed typical findings of a Rockwood injury with an additional limited external rotation so that a posterior shoulder dislocation was suspected. The CT scan confirmed the clinical suspicion. A closed reduction was performed followed by immobilization in a shoulder abduction pillow for 4 weeks and continuous physiotherapy. Upon follow up normal function with full range of motion was observed. Conclusion. A bilateral posterior shoulder dislocation can be caused by trauma and results in a limited range of motion with often additional injuries. Due to the unusually presentation the risk of missing the injury is increased. Therefore it is most important to consider this rare diagnosis and in case of clinical suspicion perform a careful algorithm of diagnostic.

How to Replace Gears by Mechanisms (Linkages)

1959 ◽  
Vol 81 (2) ◽  
pp. 126-130
Author(s):  
Kurt Hain ◽  
Gerhard Marx
Keyword(s):  
Range Of Motion ◽  
Practical Method ◽  
Limited Range ◽  
Transmission Ratio ◽  
Limited Range Of Motion ◽  
Transmission Angle

A practical method is shown for designing four-bar mechanisms having a prescribed transmission ratio held within prescribed tolerances, for a limited range of motion. Such mechanisms may economically replace gears in many applications. Charts enable the designer to choose the mechanism having the best transmission angle possible.

scholarly journals Diseño mecánico de un exoesqueleto para rehabilitación de miembro superior

2015 ◽  
Vol 17 (1) ◽  
pp. 79-90 ◽  
Author(s):  
Juan Francisco Ayala Lozano ◽  
Guillermo Urriolagoitia Sosa ◽  
Beatriz Romero Ángeles ◽  
Christopher René Torres San-Miguel ◽  
Luis Antonio Aguilar-Pérez ◽  
...  
Keyword(s):  
Upper Limb ◽  
Degrees Of Freedom ◽  
Mechanical Design ◽  
Low Cost ◽  
Structure Design ◽  
Upper Limb Rehabilitation ◽  
Palabras Clave ◽  
Mexican Patient ◽  
Almost All ◽  
Limb Rehabilitation

<strong>Título en ingles: Mechanical design of an exoskeleton for upper limb rehabilitation</strong><p><strong>Título corto: Diseño mecánico de un exoesqueleto</strong></p><p><strong>Resumen:</strong> El ritmo de vida actual, tanto sociocultural como tecnológico, ha desembocado en un aumento de enfermedades y padecimientos que afectan las capacidades físico-motrices de los individuos. Esto ha originado el desarrollo de prototipos para auxiliar al paciente a recuperar la movilidad y la fortaleza de las extremidades superiores afectadas. El presente trabajo aborda el diseño de una estructura mecánica de un exoesqueleto con 4 grados de libertad para miembro superior. La cual tiene como principales atributos la capacidad de ajustarse a la antropometría del paciente mexicano (longitud del brazo, extensión del antebrazo, condiciones geométricas de la espalda y altura del paciente). Se aplicó el método <em>BLITZ QFD</em> para obtener el diseño conceptual óptimo y establecer adecuadamente las condiciones de carga de servicio. Por lo que, se definieron 5 casos de estudio cuasi-estáticos e implantaron condiciones para rehabilitación de los pacientes. Asimismo, mediante el Método de Elemento Finito (MEF) se analizaron los esfuerzos y deformaciones a los que la estructura está sometida durante la aplicación de los agentes externos de servicio. Los resultados presentados en éste trabajo exhiben una nueva propuesta para la rehabilitación de pacientes con problemas de movilidad en miembro superior. Donde el equipo propuesto permite la rehabilitación del miembro superior apoyado en 4 grados de libertad (tres grados de libertad en el hombro y uno en el codo), el cual es adecuado para realizar terapias activas y pasivas. Asimismo, es un dispositivo que está al alcance de un mayor porcentaje de la población por su bajo costo y fácil desarrollo en la fabricación.</p><p><strong>Palabras clave:</strong> MEF, Blitz QFD, exoesqueletos, diseño mecánico.</p><p><strong>Abstract</strong>: The pace of modern life, both socio-cultural and technologically, has led to an increase of diseases and conditions that affect the physical-motor capabilities of persons. This increase has originated the development of prototypes to help patients to regain mobility and strength of the affected upper limb. This work, deals with the mechanical structure design of an exoskeleton with 4 degrees freedom for upper limb. Which has the capacity to adjust to the Mexican patient anthropometry (arm length, forearm extension, geometry conditions of the back and the patient’s height) BLITZ QFD method was applied to establish the conceptual design and loading service conditions on the structure.  So, 5 quasi-static cases of study were defined and conditions for patient rehabilitation were subjected. Also by applying the finite element method the structure was analyzed due to service loading. The results presented in this work, show a new method for patient rehabilitation with mobility deficiencies in the upper limb. The proposed new design allows the rehabilitation of the upper limb under 4 degrees of freedom (tree degrees of freedom at shoulder and one at the elbow), which is perfect to perform active and passive therapy. Additionally, it is an equipment of low cost, which can be affordable to almost all the country population.</p><p><strong>Key words:</strong> FEM, Blitz QFD, exoskeletons, mechanical design<strong>.</strong></p><p><strong>Recibido:</strong> agosto 20 de 2014   <strong>Aprobado:</strong> marzo 26 de 2015</p>

Sign in / Sign up

Export Citation Format

Share Document