Dissolution mechanism of various elements from steelmaking slag into citric acid solution

2019 ◽  
Vol 116 (3) ◽  
pp. 321
Author(s):  
Ningning Lv ◽  
Chang Su ◽  
Hui Kong ◽  
Jinxing Yang ◽  
Weiming Liu ◽  
...  

To recycle valuable elements from steelmaking slag, their dissolution mechanism into citric acid solution has been investigated. First, the relationship between dissolution ratio of each element and initial concentration of citric acid (ci) was studied. Then, the concentrations of each species in solution were calculated through mass balance. Based on these results, it can been seen that whenci = 0.00104 mol/L, Ca2+, CaCit−, MgCit−, FeH2PO42+and CaHPO4are the predominant species in solution, and Ca5(PO4)3(OH)(s) precipitate can form easily, which may suppress the dissolution of elements. Whenciincreases to 0.0104 mol/L, dissolution ratio of each element increases significantly, except for iron. And the predominant species correspondingly change to Ca2+, Mg2+, CaCit−, MgCit−, H2Cit−, H3Cit and FeH2PO42+.

1979 ◽  
Vol 16 (5) ◽  
pp. 290-292 ◽  
Author(s):  
Minoru YOSHIDA ◽  
Michiyuki ISHIKAWA ◽  
Hiroki NAKAJIMA ◽  
Saburo HOTTA

Minerals ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 613
Author(s):  
Kevin Cleary Wanta ◽  
Widi Astuti ◽  
Indra Perdana ◽  
Himawan Tri Bayu Murti Petrus

The kinetics study has an essential role in the scale-up process because it illustrates the real phenomena of a process. This study aims to develop a mathematical model that can explain the mechanism of the leaching process of laterite ore using a low concentration of the citric acid solution and evaluate that model using the experimental data. As a raw material, this process used powder-shaped limonite laterite ores with a size of 125–150 µm. The leaching process is carried out using 0.1 M citric acid solution, F:S ratio of 1:20, and a leaching time of 2 h. The temperature parameter was varied at 303, 333, and 358 K. The experimental results showed that the higher the operating temperature, the higher the extracted nickel. The results of this experiment were used to evaluate the shrinking core kinetics model and the lumped model. The simulation results for both models show that the lumped model can provide better simulation results. Quantitatively, the percentage of errors from the shrinking core model is around 3.5 times greater than the percentage of errors from using the lumped model. This result shows that in this leaching process, the process mechanism that occurs involves the reactant diffusion step and the chemical reactions step; those steps run simultaneously.


2020 ◽  
Vol 154 ◽  
pp. 02007
Author(s):  
Viktor Polishсhuk ◽  
Svetlana Tarasenko ◽  
Ievgen Antypov ◽  
Nataliya Kozak ◽  
Andrii Zhyltsov ◽  
...  

At the article is to determining an effective way to neutralize biodiesel and install optimal and rational parameters of biodiesel neutralization. The investigation of the efficiency of biodiesel neutralization was carried out by mixing it with aqueous citric acid solution (volumetric method) and by spraying an aqueous solution of citric acid over a layer of biodiesel (aerosol method).


Sign in / Sign up

Export Citation Format

Share Document