Plain radiographs underestimate varus deformity of the tibial plafond

2021 ◽  
Author(s):  
Ji-Yong Ahn ◽  
Chul-Hyun Park ◽  
Jae Woong Jung ◽  
Woo-Chun Lee
Keyword(s):  
Varus Deformity ◽  
Plain Radiographs ◽  
Tibial Plafond

Radiographic Detection of Marginal Impaction in Supination-Adduction Ankle Fractures

2017 ◽  
Vol 38 (9) ◽  
pp. 1005-1010 ◽  
Author(s):  
Ram K. Alluri ◽  
J. Ryan Hill ◽  
Steven Donohoe ◽  
Mark Fleming ◽  
Eric Tan ◽  
...  
Keyword(s):  
Predictive Value ◽  
Plain Radiograph ◽  
Operative Management ◽  
Ct Images ◽  
Ct Imaging ◽  
Ankle Fractures ◽  
Level Of Evidence ◽  
Plain Radiographs ◽  
Tibial Plafond ◽  
Marginal Impaction

Background: The purpose of this study was to describe the incidence of plafond impaction in supination-adduction type II (SAD-II) ankle fractures and assess the accuracy of plain radiographs in detecting plafond impaction and predicting planned operative management compared to computed tomography (CT). Methods: Patients with SAD-II ankle fractures were retrospectively identified. All SAD-II plain radiographs were reviewed (120 fractures) and compared to CT images (55 fractures). For each plain radiograph or CT scan, 3 orthopedic surgeons were asked the following questions: (1) Is there impaction of the tibial plafond? (2) Does the impaction require direct visualization and articular reduction? The incidence of plafond impaction and the preoperative plan were calculated separately for plain radiographs and CT scans. The accuracy of plain radiographs was calculated using responses from corresponding CT imaging as the gold standard. Change in preoperative management decisions after reviewing CT images was also calculated. Results: In 120 SAD-II ankle fracture plain radiographs, marginal impaction of the plafond was visualized in 61% of fractures. The diagnosis of impaction using plain radiographs was correct in 84% of fractures when compared to CT imaging, resulting in a 91% positive predictive value (PPV) and a 55% negative predictive value (NPV). Plain radiographs were able to predict planned operative management after review of CT imaging with an 87% PPV and 75% NPV. Conclusion: The majority of SAD-II ankle fractures involved marginal impaction of the tibial plafond. Plain radiographs were accurate in diagnosing impaction when it was present, but were not accurate in ruling out impaction. In the presence of impaction, CT likely will not change planned operative management. Level of Evidence: Level III, comparative series.

scholarly journals Poor Correction Capacity of Preexisting Ankle Valgus Deformity after Total Knee Arthroplasty

2021 ◽  
Vol 10 (16) ◽  
pp. 3624
Author(s):  
Han-Ting Shih ◽  
Wei-Jen Liao ◽  
Kao-Chang Tu ◽  
Cheng-Hung Lee ◽  
Shih-Chieh Tang ◽  
...  
Keyword(s):  
Varus Deformity ◽  
Valgus Deformity ◽  
Group Differences ◽  
Tibial Plafond ◽  
Significant Correction ◽  
Ankle Angle ◽  
Alignment Correction ◽  
Total Knee ◽  
Ankle Valgus ◽  
Hip Knee Ankle Angle

This study investigated the differences in ankle alignment changes after TKA in patients with varying preexisting ankle deformities. We retrospectively examined 90 knees with osteoarthritis and varus deformity in 78 patients who underwent TKA. Preoperative and postoperative radiographic parameters were analyzed. According to their preexisting ankle deformity, patients were assigned to the valgus or varus group. Overall, 14 (15.6%) cases were of preoperative valgus ankle deformity; the remainder were of preoperative varus ankle deformity. Hip–knee–ankle angle (HKA), tibial plafond–ground angle (PGA), and talus–ground angle (TGA) all exhibited significant correction in both groups; however, tibial plafond–talus angle (PTA) and superior space of ankle joint (SS) only changed in the varus group. The median PTA and SS significantly decreased from 1.2° to 0.3° (p < 0.001) and increased from 2.5 to 2.6 mm (p = 0.013), respectively. Notably, ∆PTA positively correlated with ∆HKA in the varus group (r = 0.247, p = 0.032) but not in the valgus group. Between-group differences in postoperative PTA (p < 0.001) and ∆PTA (p < 0.001) were significant. The degree of ankle alignment correction after TKA differed between patients with preexisting varus and valgus ankle deformities. TKA could not effectively correct the preexisting ankle valgus malalignment.

TOTAL KNEE REPLACEMENT IN SEVERE VARUS DEFORMITY

2019 ◽  
Vol 0 (0) ◽  
pp. 0-0
Author(s):  
Salah al-Deen Mohamed ◽  
khaled hassan ◽  
mohammed elsadek ◽  
Ahmed Attia
Keyword(s):  
Total Knee Replacement ◽  
Knee Replacement ◽  
Varus Deformity ◽  
Total Knee

scholarly journals Efficacy evaluation of three-dimensional printing assisted osteotomy guide plate in accurate osteotomy of adolescent cubitus varus deformity

2019 ◽  
Vol 14 (1) ◽  
Author(s):  
Yuan-Wei Zhang ◽  
Xin Xiao ◽  
Wen-Cheng Gao ◽  
Yan Xiao ◽  
Su-Li Zhang ◽  
...  
Keyword(s):  
3D Printing ◽  
Blood Loss ◽  
Three Dimensional ◽  
Operation Time ◽  
Varus Deformity ◽  
Conventional Group ◽  
Intraoperative Blood Loss ◽  
Cubitus Varus ◽  
Guide Plate ◽  
Significant Difference

Abstract Background This present study is aimed to retrospectively assess the efficacy of three-dimensional (3D) printing assisted osteotomy guide plate in accurate osteotomy of adolescent cubitus varus deformity. Material and methods Twenty-five patients (15 males and 10 females) with the cubitus varus deformity from June 2014 to December 2017 were included in this study and were enrolled into the conventional group (n = 11) and 3D printing group (n = 14) according to the different surgical approaches. The operation time, intraoperative blood loss, osteotomy degrees, osteotomy end union time, and postoperative complications between the two groups were observed and recorded. Results Compared with the conventional group, the 3D printing group has the advantages of shorter operation time, less intraoperative blood loss, higher rate of excellent correction, and higher rate of the parents’ excellent satisfaction with appearance after deformity correction (P < 0.001, P < 0.001, P = 0.019, P = 0.023). Nevertheless, no significant difference was presented in postoperative carrying angle of the deformed side and total complication rate between the two groups (P = 0.626, P = 0.371). Conclusions The operation assisted by 3D printing osteotomy guide plate to correct the adolescent cubitus varus deformity is feasible and effective, which might be an optional approach to promote the accurate osteotomy and optimize the efficacy.

scholarly journals Medial abrasion syndrome: a neglected cause of persistent pain after knee arthroplasty

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Shaw-Ruey Lyu ◽  
Chia-Chen Hsu ◽  
Jung-Pin Hung
Keyword(s):  
Knee Arthroplasty ◽  
Surgical Techniques ◽  
Varus Deformity ◽  
Outcome Study ◽  
Primary Arthroplasty ◽  
Post Operative Pain ◽  
Plateau Fracture ◽  
Advanced Stages ◽  
Total Knee ◽  
Medial Release

Abstract Introduction Persistent post-operative pain (PPOP) has detracted from some otherwise successful knee arthroplasties. This study investigated medial abrasion syndrome (MAS) as a cause of PPOP after knee arthroplasty. The surgical techniques and outcomes of incorporating this concept into the management of both primary arthroplasty cases and patients suffering from unknown causes of PPOP after arthroplasties were presented. Materials and methods In a 1-year period, the author performed unicompartmental or total knee arthroplasty (the UKA or TKA group) that also eliminated medial abrasion phenomenon (MAP) on 196 knees of 150 patients at advanced stages of knee osteoarthritis (OA). During the same year, 16 knees of 16 patients with unknown causes of PPOP after knee arthroplasties were referred to the author for the arthroscopic medial release procedure (the AMR group) after being diagnosed as MAS. Subjective satisfaction, Knee Society Score (KSS), and Knee injury and Osteoarthritis Outcome Score (KOOS) evaluations were used for outcome study. Results All 166 patients were followed for more than 3 years (mean 3.7 years, 3.1–4.2) for the outcome study. All knees receiving arthroplasty showed medial plicae with MAP at the time of surgery. Only 2 of them suffered from PPOP: one was a neglected tibial plateau fracture with residual varus deformity after UKA, and the other was a late infection after TKA and received revision. The satisfactory rate was 98.8% in the UKA group, 99.1% in the TKA group, and 100% in the AMR group. The Knee Society Scores and all subscales of KOOS were statistically improved in all groups. Conclusions MAS is a cause of pain in patients who have received knee arthroplasties, and MAP should be eliminated to ensure a successful knee arthroplasty. PPOP after knee arthroplasty can be caused by MAS, which can be managed by AMR.

scholarly journals Biomechanical Changes in Gait Patterns of Patients with Grade II Medial Gonarthritis

Diagnostics ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1242
Author(s):  
Dmitry Skvortsov ◽  
Sergey Kaurkin ◽  
Alexey Prizov ◽  
Aljona Altukhova ◽  
Alexander Troitskiy ◽  
...  
Keyword(s):  
Inertial Sensor ◽  
Varus Deformity ◽  
Functional Condition ◽  
Lower Limbs ◽  
Knee Oa ◽  
Affected Side ◽  
Hip Function ◽  
Healthy Control ◽  
Grade Ii ◽  
Single Support Phase

Deforming osteoarthritis (OA) of the knee is a progressive disease associated with pain and compromised function of the joint. Typical biomechanical modifications in the gait of subjects with medial knee OA are characterized by decreased gait speed and overload on the affected limb. The borderline stage for conservative versus surgical management is Grade II OA. The aim of this research was to study preoperatively the specific features of gait, knee, and hip function in patients with Grade II medial OA. We examined 26 patients with Grade II unilateral gonarthritis with varus deformity and 20 healthy adults. Biomechanical parameters of gait were recorded using an inertial sensor system. The gait cycle (GC) slightly increased both for the affected and for the intact limb. The hip joint movements showed significant symmetrical reduction in the first flexion amplitude, as well as a symmetrical delay in full hip extension at the end of the stance phase. In the knee, the first flexion amplitude was significantly reduced on the affected side compared to healthy control. The extension amplitude in the single support phase was significantly increased in both the affected and the intact lower limbs. The swing amplitude was significantly reduced on the affected side. On the affected side, the changes were more pronounced, both in incidence and in severity. The affected knee showed a syndrome of three reduced amplitudes. In patients, walking is characterized by several groups of symptoms: those of unloading of the affected limb, those of limiting the load on the affected joint and the musculoskeletal system as a whole, and those of gait harmonization. The symptoms of unloading the affected side and those of harmonization are the common symptoms of adaptation, typical for several pathological conditions with a relatively preserved function. The intensity of the observed symptoms can help assess changes in the subject’s functional condition over time and during the treatment.

scholarly journals Postoperative laxity of the lateral soft tissue is largely negligible in total knee arthroplasty for varus osteoarthritis

2021 ◽  
Vol 29 (1) ◽  
pp. 230949902110020
Author(s):  
Seikai Toyooka ◽  
Hironari Masuda ◽  
Nobuhiro Nishihara ◽  
Takashi Kobayashi ◽  
Wataru Miyamoto ◽  
...  
Keyword(s):  
Total Knee Arthroplasty ◽  
Soft Tissue ◽  
Knee Arthroplasty ◽  
Mechanical Axis ◽  
Varus Deformity ◽  
Varus Knee ◽  
Before And After ◽  
Knee Deformity ◽  
Varus Stress ◽  
Total Knee

Purpose: To evaluate the integrity of lateral soft tissue in varus osteoarthritis knee by comparing the mechanical axis under varus stress during navigation-assisted total knee arthroplasty before and after compensating for a bone defect with the implant. Methods: Sixty-six knees that underwent total knee arthroplasty were investigated. The mechanical axis of the operated knee was evaluated under manual varus stress immediately after knee exposure and after navigation-assisted implantation. The correlation between each value of the mechanical axis and degree of preoperative varus deformity was compared by regression analysis. Results: The maximum mechanical axis under varus stress immediately after knee exposure increased in proportion to the degree of preoperative varus deformity. Moreover, the maximum mechanical axis under varus stress after implantation increased in proportion to the degree of preoperative varus deformity. Therefore, the severity of varus knee deformity leads to a progressive laxity of the lateral soft tissue. However, regression coefficients after implantation were much smaller than those measured immediately after knee exposure (0.99 vs 0.20). Based on the results of the regression formula, the postoperative laxity of the lateral soft tissue was negligible, provided that an appropriate thickness of the implant was compensated for the bone and cartilage defect in the medial compartment without changing the joint line. Conclusion: The severity of varus knee deformity leads to a progressive laxity of the lateral soft tissue. However, even if the degree of preoperative varus deformity is severe, most cases may not require additional procedures to address the residual lateral laxity.

scholarly journals Can Adding BMP2 Improve Outcomes in Patients Undergoing the SUPERhip Procedure?

Children ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 495
Author(s):  
Dror Paley ◽  
Claire E. Shannon ◽  
Monica Nogueira ◽  
Catharina Chiari ◽  
Matthew Harris
Keyword(s):  
Femoral Neck ◽  
Internal Fixation ◽  
Varus Deformity ◽  
Drill Hole ◽  
Late Complications ◽  
Coxa Vara ◽  
Fixed Angle ◽  
Extremity Reconstruction ◽  
Delayed Ossification ◽  
Fixed Angle Device

Congenital femoral deficiency (CFD) Paley type 1b is characterized by severe bony deformity of the upper femur, extra-articular contractures of the hip, and, delayed ossification of the femoral neck and/or subtrochanteric region. The Systematic Utilitarian Procedure for Extremity Reconstruction of the hip (SUPERhip) procedure for the correction of CFD deformities was developed in 1997. Initially, a non-fixed angle device (rush rod) was used for fixation. Late complications of persistent delayed ossification and recurrent varus deformity occurred. In order to reduce and treat such complications, fixation with a fixed angle device and the off-label use of BMP2 to induce ossification of the un-ossified femoral neck were employed. The purpose of this study is to determine if the use of a fixed angle device, and, BMP2 inserted into a drill hole in the cartilage of the femoral neck, decreases the incidence of these late complications. We retrospectively reviewed 72 SUPERhip procedures performed for Paley type 1b CFD between 1997 and 2012. Due to recurrent varus or persistent delayed ossification of the femoral neck, 34 revision SUPERhip procedures were performed. In total, 106 SUPERhip procedures were studied. Sixty-eight SUPERhips were performed using internal fixation without BMP2, while 38 SUPERhips were performed with both internal fixation and the addition of BMP2. Forty-one were performed using non-fixed angle internal fixation while 65 had fixed angle internal fixation. Fixed angle devices significantly reduced the incidence of recurrent varus compared with non-fixed angle devices. Inserting BMP2 in the femoral neck significantly reduced the incidence of persistent delayed ossification. Using only a fixed angle device but no BMP2 did not reduce the incidence of delayed ossification. The combination of both a fixed angle device and BMP2 reduced the incidence of recurrent coxa vara and persistent delayed ossification of the femoral neck. The SUPERhip procedure corrects the pathoanatomy of the proximal femur in CFD Paley type 1b but is associated with a very high risk of recurrence of coxa vara and persistence of femoral neck delayed ossification, unless, a fixed angle internal fixation device is used to prevent recurrent coxa vara and BMP2 is used to induce ossification of the femoral neck.

Sign in / Sign up

Export Citation Format

Share Document