scholarly journals Effect of an Optical Whitening Toothpaste on Color Stability of Tooth-Colored Restorative Materials

2020 ◽  
Vol 14 (01) ◽  
pp. 085-091
Author(s):  
Sedighe Sadat Hashemikamangar ◽  
Farnoosh Hoseinpour ◽  
Nazanin Kiomarsi ◽  
Mehrzad Gholampour Dehaki ◽  
Mohammad Javad Kharazifard
Keyword(s):  
Statistical Analysis ◽  
Color Change ◽  
Color Stability ◽  
Composite Resins ◽  
Time Points ◽  
Color Changes ◽  
Honestly Significant Difference ◽  
Significant Difference ◽  
Resin Modified Glass Ionomer ◽  
Composite Samples

Abstract Objectives This study aimed to assess the effect of an optical whitening toothpaste on color stability of microhybrid, nanofilled, and microfilled composite resins and resin-modified glass ionomer (RMGI) cement in comparison of two other toothpastes. Materials and Methods In this experimental study, disc-shaped composite samples were fabricated. The samples were then polished using silicon carbide papers. Twenty-seven samples of each material were fabricated and subjected to colorimetry using a spectrophotometer. Each group of material was then divided into three subgroups for the application of conventional whitening and whitening containing blue covarine toothpastes. One operator brushed the samples with an electric soft toothbrush with circular motion twice a day, each time for 30 seconds. Colorimetry was performed at 0, 1, 7, 30, and 90 days. Statistical Analysis Two-way analysis of variance (ANOVA), one-way ANOVA, and Tukey’s honestly significant difference (HSD) test were used for statistical analysis. Results The interaction effect of type of restorative material and time on ∆E was not significant at baseline or 1 day (p > 0.05). The effect of type of toothpaste on ∆E was not significant at baseline or 1 day (p = 0.78) but the effect of type of material was significant (p < 0.05). The toothpastes had significantly different effects on ∆E of Z250 at all time points (p < 0.05) except for ∆E0–30 (p = 0.106). The toothpastes had significantly different effects on ∆E of Z350 and Gradia at all time points (p < 0.05). The same was true for RMGI except for ∆E0–7 (p = 0.43) and ∆E0–90 (p = 0.52). The majority of color changes caused by toothpastes were not clinically perceivable (∆E < 3.3), except for ∆E0–90 by the whitening toothpaste (∆E = 9), ∆E0–90 by the conventional toothpaste for Z350 (∆E = 3.9), and ∆E0–1 by the whitening toothpaste for RMGI (∆E = 3.7). Conclusion The color change of all composite samples was not clinically perceivable (<3.3) at all time points, which shows that the tested toothpastes do not cause a significant change in color of composite materials.

scholarly journals Evaluation of color change in acrylic and bisacrylic resin resins in different solutions

2018 ◽  
Vol 5 (4) ◽  
pp. 76
Author(s):  
Mone Laiz Bortoli ◽  
Cristina Von Appen ◽  
Camila Longoni ◽  
Carmen Beatriz Borges Fortes ◽  
Jefferson Tomio Sanada
Keyword(s):  
Color Change ◽  
Color Stability ◽  
Acrylic Resin ◽  
Color Variation ◽  
Color Reading ◽  
Control Group ◽  
Color Changes ◽  
Significant Difference ◽  
Prosthesis Material ◽  
Chlorhexidine Solution

Aim: This work aimed to evaluate the color stability of an acrylic resin chemically activated (ARCA) using different handling techniques, and a bisacrylic resin when exposed to different pigmentation solutions.Material and Methods: Silicon matrixes were confectioned (10x10x3mm) to be used as specimens. The groups were designed as follows: Group Pot, Group Brush, Group Manufacturer and Group Bisacrylic (n=18). Each group was exposed to three different pigmentation solutions: distilled water, coke and chlorhexidine digluconate 0.12%. Three readings were performed for each specimen using a spectrophotometer, and the evaluations were carried out in three different time. After the color reading, three averages and the standard deviation of variation were performed after 24 hours (T1), 7 days (T2) and 14 days (T3). Data were submitted to the ANOVA and 2 criteria and Tukey (P<0.05) in the statistical software SSPS 18 for Macintosh (SPSS Inc., Chicago, USA).Results: When compared the solutions in each group of material, there was no statistically significant difference, except for T3, where the group Dencor Brush and Bisacrylic demonstrated higher color variation in all the solutions, even in the control group, and the values in Chlorhexidine higher than the other, showing greater instability after 14 days.Conclusions: With the results, bisacrylic resin used as provisory prosthesis material presents greater color instability than the ARCA, when submitted to different solutions. Bisacrylic resin and Dencor Brush present significantly visible color changes in chlorhexidine solution after 14 days. All the materials in coke solution present homogeneity in the color change after 7 days exposition to the solution, with no visible color change.

scholarly journals Evaluation of the color stability and surface roughness of dual-cure, bulk-fill composites

2021 ◽  
Vol 11 (Suppl. 1) ◽  
pp. 266-273
Author(s):  
Zehra Şivgan Güner ◽  
Behiye Bolgül ◽  
Tacettin İnandı
Keyword(s):  
Surface Roughness ◽  
Color Stability ◽  
Pediatric Dentistry ◽  
Ease Of Use ◽  
Composite Resins ◽  
Distilled Water ◽  
Significant Difference ◽  
Cherry Juice ◽  
Experimental Group ◽  
Composite Samples

Aim: In recent years, tooth-colored, dual-cure, bulk-fill composite resins, which have attracted attention for their ease of use, constitute one of the latest developments in pediatric dentistry applications. This study aimed to evaluate the color stability and surface roughness properties of three different dual-cure, bulk-fill materials and one light-cure, bulk-fill composite material used in pediatric dentistry. Methodology: In this study, three different dual-cure, bulk-fill composites (Fill-Up, HyperFIL, Cention-N) and one light-polymerized bulk-fill composite (Reveal HD) were used. A total of 70 samples were obtained for surface roughness testing. The surface roughness testing was performed with a Hysitron TI 950 Triboindenter device. A total of 105 samples were obtained for the evaluation of color stability. Cherry juice, iced tea, and distilled water were used as solutions. Initial and final color measurements were made using a spectrophotometer. The color differences between measurements were recorded according to the CIEDE 2000 system. Results: The least surface roughness among the composite groups was observed in the light polymerized Cention-N composite samples in the experimental group. In the Fill-Up and Cention-N composite groups in the experimental group, the surface roughness of the samples left to self-polymerization and the samples polymerized with light showed a statistically significant difference (p < 0.05). Among the composite groups, the highest amount of coloring was observed in the Fill-Up composite samples, which were left to self-polymerization and kept in cherry juice in the experimental group. The least coloration among the composite groups was observed in the Cention-N composite samples polymerized with light and kept in distilled water. Conclusion: Based on this information, a decrease in surface roughness and an increase in color stability can be expected due to self-polymerization and the light polymerization of dual-cured, bulk-fill composites.   How to cite this article: Şivgan Güner Z, Bolgül B, İnandı T. Evaluation of the color stability and surface roughness of dual-cure, bulk-fill composites. Int Dent Res 2021;11(Suppl.1):266-273. https://doi.org/10.5577/intdentres.2021.vol11.suppl.39   Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.

scholarly journals The effect of optical brightening toothpaste on the color stability of esthetic restorative materials

2021 ◽  
Vol 11 (Suppl. 1) ◽  
pp. 81-85
Author(s):  
Firdevs Kahvecioğlu ◽  
Elçim Çoban ◽  
Hayriye Esra Ülker
Keyword(s):  
Color Change ◽  
Calculated Data ◽  
Color Stability ◽  
Color Changes ◽  
Significant Difference ◽  
Restorative Materials ◽  
Cherry Juice ◽  
Native Speakers Of English ◽  
Materials Used ◽  
Post Hoc

Aim: The aim of this study is to evaluate the effects of whitening toothpaste applications on the color stability of different tooth-colored restorative materials (Fuji IX, GC Fuji II LC, Equia Forte, and Kerr Point 4)  Methodology: Standardized fourty disc-shaped specimens were prepared from esthetic restorative materials and polished. The baseline color values of each specimen were then measured using a spectrophotometer, according to the Commission Internationale de l'Eclairage L*, a*, and b* (CIELAB) color scale. Ten specimens from each group were then immersed in two different beverages (cherry juice and coke) for seven days. After immersion, the color value of each specimen was re-measured. Each sample was brushed with whitening toothpaste for 30 seconds using an electric toothbrush. The samples were kept in distilled water at room temperature and brushing continued twice a day for seven days. The color change value, Delta E (ΔE), was calculated. Data were analyzed by two-way ANOVA and post hoc Tukey's test. Results: When the results were evaluated, after the colored samples had been brushed with whitening toothpaste, a difference was found between the Delta E values according to the materials used (p<0.001), but no difference was found in relation to the beverages (p>0.001). When the values of the color changes were evaluated after the first brushing with whitening toothpaste and before the specimens were colored with drinks, a difference was observed in the Fuji II cola, Fuji II cherry, and Equia Forte cola groups (p<0.05). When the values of the color changes were evaluated for specimens in which brushing had been done twice a day for seven days with whitening toothpaste and before they were colored with drinks, a significant difference was observed in the Fuji II cherry and Equia Forte cola groups (p<0.05). Conclusion: Using Signal White Now whitening toothpaste for 2 min 2 times a day for seven days caused significant changes in the color of the restorative materials. The color change is dependent upon the type of restorative material that is used.   How to cite this article: Kahvecioğlu F, Çoban E, Ülker HE. The effect of optical brightening toothpaste on the color stability of esthetic restorative materials. Int Dent Res 2021;11(Suppl.1):80-4. https://doi.org/10.5577/intdentres.2021.vol11.suppl1.13   Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.

scholarly journals Influence of a Bleaching Agent on the Color Stability of Indirect Composite Resins Immersed in Dyes

Ceramics ◽  
2019 ◽  
Vol 2 (2) ◽  
pp. 235-245
Author(s):  
Daniele dos Santos ◽  
Emily da Silva ◽  
Juliani Mendonça ◽  
Denis Cetrangolo ◽  
Fernanda Caxias ◽  
...  
Keyword(s):  
Red Wine ◽  
Artificial Saliva ◽  
Color Stability ◽  
Composite Resins ◽  
Bleaching Agent ◽  
Initial State ◽  
Honestly Significant Difference ◽  
Significant Difference ◽  
Indirect Composite ◽  
Bleaching Action

This study aimed to evaluate the effect of a bleaching agent on the color of extrinsically pigmented indirect composite resins. Samples of five resins (Adoro, Resilab, Cristobal, Sinfony, Epricord) were manufactured and divided into five groups: red wine, coffee, orange juice, Coca-Cola, and artificial saliva (control). The stained samples were immersed in a 38% hydrogen peroxide solution for 30 min per week, over three weeks. Color readings were performed at the initial state (L0), after 21 days of dye immersion (ΔE1, L1), and after 7 (ΔE2, L2), 14 (ΔE3, L3), and 21 days (ΔE4, L4) of bleach immersion. Data were subjected to ANOVA and Tukey’s honestly significant difference (HSD) test (α = 0.05). The color alteration was greater in ΔE1, regardless of color solution, indicating extrinsic pigmentation. The Resilab group exhibited greater ΔE1 values than the other resins. The bleaching agent promoted bleaching action on the surfaces of the materials studied, removing the previously impregnated pigments.

scholarly journals Color Stability of a New Rice Husk Composite in Comparison with Conventional Composites after Exposure to Commonly Consumed Beverages in Malaysia

2019 ◽  
Vol 2019 ◽  
pp. 1-7
Author(s):  
Kacharaju Kranthi Raja ◽  
Padmini Hari ◽  
Melissa Queen Kha Chin ◽  
Kiran Singbal ◽  
Ismail M. Fareez
Keyword(s):  
Statistical Analysis ◽  
Rice Husk ◽  
Color Stability ◽  
Color Changes ◽  
Mixed Anova ◽  
Organic Rice ◽  
Color Measurements ◽  
Significant Difference ◽  
Color System ◽  
Post Hoc

Objective. To evaluate the color stability of a new organic rice husk nanocomposite as compared to four conventional composites after exposure to commonly consumed beverages in Malaysia. Methods. One hundred and twenty-five disk samples were prepared from a new rice husk-based composite and four other conventional methacrylate-based light-cured composites of shade A2. The samples were immersed in four commonly consumed beverages: coco-based drink, kopi, Chinese tea, and teh tarik for four weeks. The color measurements were carried out every week using the reflectance spectrophotometer according to the CIE L∗a∗b∗ color system. Color changes of samples (ΔE) in each week were calculated. Statistical analysis was carried out by performing a mixed ANOVA and Tukey’s post hoc test in order to analyse the differences in ΔE. Results. The findings revealed a statistically significant difference of ΔE reading (p<0.05) among all composites immersed in all four beverages after four weeks. Rice husk composites exhibited lesser color stability as compared to Ceram.X One Universal (p<0.001) and G-aenial Universal Flo (p<0.001) but showed higher color stability compared to Solare-X (p<0.001) and Neofil (p<0.001). Coffee and Chinese tea had the most significant impact on color changes (p<0.05) observed in all composites over four weeks of study. Conclusion. Rice husk composite showed acceptable color stability. It can be considered as an alternative to conventional composites due to its eco-friendly properties.

scholarly journals Color Stability of the Bulk-Fill Composite Resins with Different Thickness in Response to Coffee/Water Immersion

2016 ◽  
Vol 2016 ◽  
pp. 1-5 ◽  
Author(s):  
Sayna Shamszadeh ◽  
Seyedeh Mahsa Sheikh-Al-Eslamian ◽  
Elham Hasani ◽  
Ahmad Najafi Abrandabadi ◽  
Narges Panahandeh
Keyword(s):  
Composite Resin ◽  
Color Change ◽  
Imaging System ◽  
Water Immersion ◽  
Color Space ◽  
Color Stability ◽  
Composite Resins ◽  
Distilled Water ◽  
Color Changes ◽  
Post Hoc

We aimed to evaluate the color stability of bulk-fill and conventional composite resin with respect to thickness and storage media. Twenty specimens of a conventional composite resin (6 mm diameter and 2 mm thick) and 40 specimens of the bulk-fill Tetric EvoCeram composite resin at two different thicknesses (6 mm diameter and 2 mm thick or 4 mm thick,n=20) were prepared. The specimens were stored in distilled water during the study period (28 d). Half of the specimens were remained in distilled water and the other half were immersed in coffee solution 20 min/d and kept in distilled water between the cycles. Color changes (ΔE) were measured using the CIEL⁎a⁎b⁎color space and a digital imaging system at 1, 7, 14, and 28 days of storage. Data were analyzed using Two-way ANOVA and Tukey’s HSD post hoc test (P<0.05). Composite resins showed significant increase in color changes by time (bulk-fill > conventional;P<0.001). Coffee exhibited significantly more staining susceptibility than that of distilled water (P<0.001). There was greater color changes with increasing the increment thickness, which was significant at 14 (P<0.001) and 28 d (P<0.01). Color change of bulk-fill composite resin was greater than that of the conventional one after coffee staining and is also a function of increment thicknesses.

scholarly journals Color stability of esthetic coatings applied to nickel-titanium archwires

2017 ◽  
Vol 46 (5) ◽  
pp. 307-311
Author(s):  
Marcus Vinicius Neiva Nunes do REGO ◽  
Geórgia Wain Thi LAU ◽  
Yago Carneiro ARAÚJO ◽  
Rayssa Melo e SILVA
Keyword(s):  
Epoxy Resin ◽  
Color Change ◽  
Color Stability ◽  
Surface Characteristics ◽  
Nickel Titanium ◽  
Staining Solution ◽  
Color Changes ◽  
Significant Difference ◽  
Total Color Change ◽  
Coating Type

Abstract Introduction Color stability is an important feature to be considered when using esthetic coated archwires. Objective To evaluate color changes on the surface of esthetic nickel-titanium archwires coated with Teflon (Ortho Organizers, USA) or epoxy resin (Tecnident, Brazil) after immersion in staining solution. Material and method Twelve 20-mm-long wire segments were used for each type of coating, which were mounted as two test specimens with a width of 7 mm each. The buccal surface of the archwires was evaluated for fluorescence and color measurements both at baseline and after immersion in a staining solution for 21 days using the VITA Easyshade® Compact spectrophotometer (Model DEASYC220). Differences in total color change according to coating type were compared using an independent samples t-test (p<0.05). The surface characteristics of as-received coated archwires were assessed using scanning electron microscopy. Result Color changes were observed on the esthetic coatings, with a significant difference between the two brands analyzed. Surface analysis revealed flaws such as wear, pitting, elevations, lack of material, granulation, grooves, cracks, and lack of standardization in the coating process in all as-received archwires, but flaws were less evident in epoxy-resin coatings. Conclusion The two esthetic coatings did not show color stability, but Teflon coatings showed a more intense color change than epoxy-resin coatings.

The Effect of Bleaching Agents on the Color Stability of Ceromer and Porcelain Restorative Materials In Vitro

2012 ◽  
Vol 38 (1) ◽  
pp. E1-E8 ◽  
Author(s):  
HB Kara ◽  
F Aykent ◽  
B Ozturk
Keyword(s):  
Color Change ◽  
Glass Ceramics ◽  
In Vitro Study ◽  
Color Stability ◽  
Color Changes ◽  
Bleaching Procedure ◽  
Significant Difference ◽  
Restorative Materials ◽  
The Difference

SUMMARY Purpose The aim of this in vitro study was to determine the color changes of five different restorative materials after exposing these materials to two different home bleaching agents. Methods This study applied bleaching agents to an ultralow-fusing porcelain, a low-fusing porcelain, two types of heat-pressed glass ceramics, and a ceromer. A total of 24 disc-shaped specimens were fabricated (with a diameter of 10 mm and a thickness of 2 mm) from each material (n=12). The initial color measurements were taken with a spectrophotometer. The first set of specimens were bleached with 10% hydrogen peroxide (HP) for one hour daily for 10 days. The other set of specimens were bleached with 10% carbamide peroxide (CP) bleaching gel for eight hours daily for 14 days. Data were analyzed with the one-way analysis of variance and Kruskal-Wallis statistical test. The difference in the prebleaching and postbleaching color of each material was considered to be statistically significant at p &lt; 0.05. Results The study found a statistically significant difference among the color changes of the test groups after exposing them to both bleaching agents (p&lt;0.05). Appreciable color change was observed in the Estenia (ΔE=3.99) specimens that were bleached with the HP, and noticeable color changes were observed in the Estenia (ΔE=1.89) and IPS Empress 2 (ΔE=1.66) groups when they were treated with the CP. Conclusions Restorations (especially polymer-containing restorative materials) should be protected before any bleaching procedure due to the high risk of color change.

scholarly journals In Vitro Effect of Denture Cleansers on the Color Stability of Polyetheretherketone and Other Denture Base Polymers

2021 ◽  
pp. 284-293
Author(s):  
Samet Tekin
Keyword(s):  
Color Change ◽  
Color Stability ◽  
Chemical Compositions ◽  
Denture Base ◽  
Color Changes ◽  
All Solutions ◽  
Significant Difference ◽  
Denture Cleansers

The aim of this in vitro study was to compare the long-term effect of overnight use of denture cleansers with different chemical compositions on the color stability of denture base polymers (DBPs). The four DBPs evaluated were PEEK (PK group), thermoinjection-molded polyamide (PA group), auto-polymerized polymethylmethacrylate (PMMA) (AP group), and heat-polymerized resin PMMA (HP group). The cleaning agents used were Corega tablet (CT), Protefix tablet (PT), and 0.5% sodium hypochlorite (NaOCl) solution (SH). Distilled water (DW) served as a control. Forty-eight disc-shaped specimens (10mm × 2mm) were prepared from each DBP and randomly immersed in the different storage media (n=12 in each group). Color measurements of the specimens before and after immersion in the denture cleansers were made using a spectrophotometer (VITA Easyshade V). The color changes were measured and recorded in L* a* b*. After 120 d, the CIEDE2000 formula was used to calculate color changes (∆E00). For analysis of the data, a multivariate analysis of variance was used (p<0.05).  The results of the statistical analysis revealed significant color change differences in the DBPs immersed in the various denture cleansers (p<0.05). Groups PA and PK showed the highest values for all solutions. AP-SH showed the highest ∆E00 value in group AP, no significant difference was found between other solutions. In group HP, there was no statistically significant difference between the average ∆E00 values of all solutions.  Long-term daily use of the denture cleansers affected the color stability of all the DBPs, although the level of color change was acceptable. Laboratory and clinical studies on the color stability of PEEK are needed to confirm the results of this study.

scholarly journals Comparative evaluation of the color stability of universal composites

2021 ◽  
Vol 11 (Suppl. 1) ◽  
pp. 234-237
Author(s):  
Merve Gürses ◽  
Nevin Çobanoğlu ◽  
Omar Faez Abdulateef
Keyword(s):  
Comparative Evaluation ◽  
Color Change ◽  
Native Speakers ◽  
Color Stability ◽  
Composite Resins ◽  
Control Group ◽  
Distilled Water ◽  
Color Changes ◽  
Before And After ◽  
Native Speakers Of English

Aim: The aim of this study is to compare the color stability of different universal composites and to evaluate the effects of keeping them in water for 1 week before coloring. Methodology: Filtek Ultimate (FU), Estelite Ʃ Quick (EQ), and Ceram X One (CX) composites were used. The specimens were kept in the dark, dry environment for 24 hours, then polished, and each composite group was divided into 3 groups: the control, the group that was kept in water for 1 week before coloring and coloring (n=7). The samples in the control group were kept in distilled water for 3 weeks. Samples in the coloring group were colored with coffee for 2 weeks (C), and the samples in the last group were kept in water for 1 week and then stained with coffee for 2 weeks (W+C) (n=7). Color measurements for all samples were taken twice, once before and once after the coloring period. The color changes of the samples were measured using the ∆E* parameter, which was calculated with before and after measurements.  Results: For all composite resins, the ΔE values of the samples in the W+C and C groups were significantly higher than those in the control group. When the composites were compared with each other, the differences between the ΔE values of the composites in the control, W+C, and C groups were not statistically significant. For FU and ESQ, at the end of the coloration period, there were no statistically significant differences between the W+C and C groups. However, for CX, the color change of the samples in the W+C group was significantly higher than that in  the C group. Conclusion: Storage in distilled water for 1 week before staining did not reduce the color change values of the samples. Thus, after composite restorations are performed, there is no need to advise patients to avoid staining foods, especially in the first week after restoration.   How to cite this article: Abdulateef OF, Çobanoğlu N, Gürses M. Comparative evaluation of the color stability of universal composites. Int Dent Res 2021;11(Suppl.1):234-7. https://doi.org/10.5577/intdentres.2021.vol11.suppl1.34   Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.

Sign in / Sign up

Export Citation Format

Share Document