scholarly journals Color Stability of a New Rice Husk Composite in Comparison with Conventional Composites after Exposure to Commonly Consumed Beverages in Malaysia

2019 ◽  
Vol 2019 ◽  
pp. 1-7
Author(s):  
Kacharaju Kranthi Raja ◽  
Padmini Hari ◽  
Melissa Queen Kha Chin ◽  
Kiran Singbal ◽  
Ismail M. Fareez
Keyword(s):  
Statistical Analysis ◽  
Rice Husk ◽  
Color Stability ◽  
Color Changes ◽  
Mixed Anova ◽  
Organic Rice ◽  
Color Measurements ◽  
Significant Difference ◽  
Color System ◽  
Post Hoc

Objective. To evaluate the color stability of a new organic rice husk nanocomposite as compared to four conventional composites after exposure to commonly consumed beverages in Malaysia. Methods. One hundred and twenty-five disk samples were prepared from a new rice husk-based composite and four other conventional methacrylate-based light-cured composites of shade A2. The samples were immersed in four commonly consumed beverages: coco-based drink, kopi, Chinese tea, and teh tarik for four weeks. The color measurements were carried out every week using the reflectance spectrophotometer according to the CIE L∗a∗b∗ color system. Color changes of samples (ΔE) in each week were calculated. Statistical analysis was carried out by performing a mixed ANOVA and Tukey’s post hoc test in order to analyse the differences in ΔE. Results. The findings revealed a statistically significant difference of ΔE reading (p<0.05) among all composites immersed in all four beverages after four weeks. Rice husk composites exhibited lesser color stability as compared to Ceram.X One Universal (p<0.001) and G-aenial Universal Flo (p<0.001) but showed higher color stability compared to Solare-X (p<0.001) and Neofil (p<0.001). Coffee and Chinese tea had the most significant impact on color changes (p<0.05) observed in all composites over four weeks of study. Conclusion. Rice husk composite showed acceptable color stability. It can be considered as an alternative to conventional composites due to its eco-friendly properties.

scholarly journals Effect of an Optical Whitening Toothpaste on Color Stability of Tooth-Colored Restorative Materials

2020 ◽  
Vol 14 (01) ◽  
pp. 085-091
Author(s):  
Sedighe Sadat Hashemikamangar ◽  
Farnoosh Hoseinpour ◽  
Nazanin Kiomarsi ◽  
Mehrzad Gholampour Dehaki ◽  
Mohammad Javad Kharazifard
Keyword(s):  
Statistical Analysis ◽  
Color Change ◽  
Color Stability ◽  
Composite Resins ◽  
Time Points ◽  
Color Changes ◽  
Honestly Significant Difference ◽  
Significant Difference ◽  
Resin Modified Glass Ionomer ◽  
Composite Samples

Abstract Objectives This study aimed to assess the effect of an optical whitening toothpaste on color stability of microhybrid, nanofilled, and microfilled composite resins and resin-modified glass ionomer (RMGI) cement in comparison of two other toothpastes. Materials and Methods In this experimental study, disc-shaped composite samples were fabricated. The samples were then polished using silicon carbide papers. Twenty-seven samples of each material were fabricated and subjected to colorimetry using a spectrophotometer. Each group of material was then divided into three subgroups for the application of conventional whitening and whitening containing blue covarine toothpastes. One operator brushed the samples with an electric soft toothbrush with circular motion twice a day, each time for 30 seconds. Colorimetry was performed at 0, 1, 7, 30, and 90 days. Statistical Analysis Two-way analysis of variance (ANOVA), one-way ANOVA, and Tukey’s honestly significant difference (HSD) test were used for statistical analysis. Results The interaction effect of type of restorative material and time on ∆E was not significant at baseline or 1 day (p > 0.05). The effect of type of toothpaste on ∆E was not significant at baseline or 1 day (p = 0.78) but the effect of type of material was significant (p < 0.05). The toothpastes had significantly different effects on ∆E of Z250 at all time points (p < 0.05) except for ∆E0–30 (p = 0.106). The toothpastes had significantly different effects on ∆E of Z350 and Gradia at all time points (p < 0.05). The same was true for RMGI except for ∆E0–7 (p = 0.43) and ∆E0–90 (p = 0.52). The majority of color changes caused by toothpastes were not clinically perceivable (∆E < 3.3), except for ∆E0–90 by the whitening toothpaste (∆E = 9), ∆E0–90 by the conventional toothpaste for Z350 (∆E = 3.9), and ∆E0–1 by the whitening toothpaste for RMGI (∆E = 3.7). Conclusion The color change of all composite samples was not clinically perceivable (<3.3) at all time points, which shows that the tested toothpastes do not cause a significant change in color of composite materials.

scholarly journals The effect of optical brightening toothpaste on the color stability of esthetic restorative materials

2021 ◽  
Vol 11 (Suppl. 1) ◽  
pp. 81-85
Author(s):  
Firdevs Kahvecioğlu ◽  
Elçim Çoban ◽  
Hayriye Esra Ülker
Keyword(s):  
Color Change ◽  
Calculated Data ◽  
Color Stability ◽  
Color Changes ◽  
Significant Difference ◽  
Restorative Materials ◽  
Cherry Juice ◽  
Native Speakers Of English ◽  
Materials Used ◽  
Post Hoc

Aim: The aim of this study is to evaluate the effects of whitening toothpaste applications on the color stability of different tooth-colored restorative materials (Fuji IX, GC Fuji II LC, Equia Forte, and Kerr Point 4)  Methodology: Standardized fourty disc-shaped specimens were prepared from esthetic restorative materials and polished. The baseline color values of each specimen were then measured using a spectrophotometer, according to the Commission Internationale de l'Eclairage L*, a*, and b* (CIELAB) color scale. Ten specimens from each group were then immersed in two different beverages (cherry juice and coke) for seven days. After immersion, the color value of each specimen was re-measured. Each sample was brushed with whitening toothpaste for 30 seconds using an electric toothbrush. The samples were kept in distilled water at room temperature and brushing continued twice a day for seven days. The color change value, Delta E (ΔE), was calculated. Data were analyzed by two-way ANOVA and post hoc Tukey's test. Results: When the results were evaluated, after the colored samples had been brushed with whitening toothpaste, a difference was found between the Delta E values according to the materials used (p<0.001), but no difference was found in relation to the beverages (p>0.001). When the values of the color changes were evaluated after the first brushing with whitening toothpaste and before the specimens were colored with drinks, a difference was observed in the Fuji II cola, Fuji II cherry, and Equia Forte cola groups (p<0.05). When the values of the color changes were evaluated for specimens in which brushing had been done twice a day for seven days with whitening toothpaste and before they were colored with drinks, a significant difference was observed in the Fuji II cherry and Equia Forte cola groups (p<0.05). Conclusion: Using Signal White Now whitening toothpaste for 2 min 2 times a day for seven days caused significant changes in the color of the restorative materials. The color change is dependent upon the type of restorative material that is used.   How to cite this article: Kahvecioğlu F, Çoban E, Ülker HE. The effect of optical brightening toothpaste on the color stability of esthetic restorative materials. Int Dent Res 2021;11(Suppl.1):80-4. https://doi.org/10.5577/intdentres.2021.vol11.suppl1.13   Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.

scholarly journals Evaluation of color change in acrylic and bisacrylic resin resins in different solutions

2018 ◽  
Vol 5 (4) ◽  
pp. 76
Author(s):  
Mone Laiz Bortoli ◽  
Cristina Von Appen ◽  
Camila Longoni ◽  
Carmen Beatriz Borges Fortes ◽  
Jefferson Tomio Sanada
Keyword(s):  
Color Change ◽  
Color Stability ◽  
Acrylic Resin ◽  
Color Variation ◽  
Color Reading ◽  
Control Group ◽  
Color Changes ◽  
Significant Difference ◽  
Prosthesis Material ◽  
Chlorhexidine Solution

Aim: This work aimed to evaluate the color stability of an acrylic resin chemically activated (ARCA) using different handling techniques, and a bisacrylic resin when exposed to different pigmentation solutions.Material and Methods: Silicon matrixes were confectioned (10x10x3mm) to be used as specimens. The groups were designed as follows: Group Pot, Group Brush, Group Manufacturer and Group Bisacrylic (n=18). Each group was exposed to three different pigmentation solutions: distilled water, coke and chlorhexidine digluconate 0.12%. Three readings were performed for each specimen using a spectrophotometer, and the evaluations were carried out in three different time. After the color reading, three averages and the standard deviation of variation were performed after 24 hours (T1), 7 days (T2) and 14 days (T3). Data were submitted to the ANOVA and 2 criteria and Tukey (P<0.05) in the statistical software SSPS 18 for Macintosh (SPSS Inc., Chicago, USA).Results: When compared the solutions in each group of material, there was no statistically significant difference, except for T3, where the group Dencor Brush and Bisacrylic demonstrated higher color variation in all the solutions, even in the control group, and the values in Chlorhexidine higher than the other, showing greater instability after 14 days.Conclusions: With the results, bisacrylic resin used as provisory prosthesis material presents greater color instability than the ARCA, when submitted to different solutions. Bisacrylic resin and Dencor Brush present significantly visible color changes in chlorhexidine solution after 14 days. All the materials in coke solution present homogeneity in the color change after 7 days exposition to the solution, with no visible color change.

scholarly journals Color Stability and Gloss of Esthetic Restorative Materials after Chemical Challenges

2019 ◽  
Vol 30 (1) ◽  
pp. 52-57 ◽  
Author(s):  
Eduardo Haruki Ozera ◽  
Fernanda Miori Pascon ◽  
Américo Bortolazzo Correr ◽  
Regina Maria Puppin-Rontani ◽  
Aline Rogéria de Castilho ◽  
...  
Keyword(s):  
Color Change ◽  
Artificial Saliva ◽  
Color Stability ◽  
Initial Surface ◽  
Resin Composites ◽  
Cranberry Juice ◽  
Color Changes ◽  
Restorative Materials ◽  
Post Hoc ◽  
Acidic Beverages

Abstract This study evaluated gloss and color changes of esthetic restorative materials subjected to different acidic beverages. Specimens of resin composites (Z350XT (Z350), IPS Empress Direct (ED), Charisma Diamond (CD)) were prepared and the initial surface gloss and color (ΔE) were measured (n=10). Then, the specimens were immersed in 4 mL of each of the different beverages (cranberry juice; Coca-Cola; coffee or artificial saliva) during 15 min, 3x/day for 14 days and new gloss and color readings were obtained. Color change was evaluated with the ΔE formula and gloss change values were obtained by the formula: (final gloss - initial gloss). Data was submitted to two-way ANOVA followed by Tukey’s post hoc test (a=0.05). CD showed the lowest color change among resin composites. The highest ΔE values were obtained after immersion in coffee and cranberry juice. Coffee promoted the highest gloss change (worst gloss retention), followed by cranberry juice, Coca-cola and artificial saliva (p<0.05). The type of beverage significantly influenced the gloss of resin composites. Coca-cola reduced gloss of the three resin composites in a similar manner. Coffee affected the ED gloss more than that of Z350 and CD, while cranberry juice affected Z350 more than ED and CD. Saliva had a more pronounced effect on the gloss retention of CD than ED. The beverages used in this study influenced the optical surface properties of the composites studied.

Effect of Liquid Polishing System on Color Stability of Bleached Enamel

2013 ◽  
Vol 804 ◽  
pp. 141-145
Author(s):  
Xiu Lan Chen ◽  
Huang Qin Chen
Keyword(s):  
Red Wine ◽  
Color Change ◽  
Color Stability ◽  
Control Groups ◽  
Significant Difference ◽  
Before And After ◽  
Total Color Change ◽  
Post Hoc ◽  
And Control ◽  
One Way Anova

The purpose of this study was to investigate the effect of liquid polishing system (BisCover) on color stability of the bleached enamel upon exposure to a staining agent-red wine. Forty specimens were prepared. They were divided into 2 groups and different procedures, including only bleaching with Opalescence PF (PF) or Opalescence regular (R) gels, and application of BisCover after blaeching (PF-B, R-B) were used. Unbleached specimens were served as control groups (control-1 and control-2). The specimens were stored for 48 h in red wine. The color of all specimens was measured before and after exposure with a spectrophotometer, and total color change (ΔE*) were calculated. The data were analyzed with a one-way ANOVA and the means were compared by Tukeys post hoc analysis (α=0.05). PF-B and R-B groups demonstrated significantly less color change than PF and R groups. the control-1 and control-2 groups had the least color change. No significant difference were observed between PF and R group. BisCover improved the color stability of bleached enamel in red wine.

scholarly journals Color Stability of the Bulk-Fill Composite Resins with Different Thickness in Response to Coffee/Water Immersion

2016 ◽  
Vol 2016 ◽  
pp. 1-5 ◽  
Author(s):  
Sayna Shamszadeh ◽  
Seyedeh Mahsa Sheikh-Al-Eslamian ◽  
Elham Hasani ◽  
Ahmad Najafi Abrandabadi ◽  
Narges Panahandeh
Keyword(s):  
Composite Resin ◽  
Color Change ◽  
Imaging System ◽  
Water Immersion ◽  
Color Space ◽  
Color Stability ◽  
Composite Resins ◽  
Distilled Water ◽  
Color Changes ◽  
Post Hoc

We aimed to evaluate the color stability of bulk-fill and conventional composite resin with respect to thickness and storage media. Twenty specimens of a conventional composite resin (6 mm diameter and 2 mm thick) and 40 specimens of the bulk-fill Tetric EvoCeram composite resin at two different thicknesses (6 mm diameter and 2 mm thick or 4 mm thick,n=20) were prepared. The specimens were stored in distilled water during the study period (28 d). Half of the specimens were remained in distilled water and the other half were immersed in coffee solution 20 min/d and kept in distilled water between the cycles. Color changes (ΔE) were measured using the CIEL⁎a⁎b⁎color space and a digital imaging system at 1, 7, 14, and 28 days of storage. Data were analyzed using Two-way ANOVA and Tukey’s HSD post hoc test (P<0.05). Composite resins showed significant increase in color changes by time (bulk-fill > conventional;P<0.001). Coffee exhibited significantly more staining susceptibility than that of distilled water (P<0.001). There was greater color changes with increasing the increment thickness, which was significant at 14 (P<0.001) and 28 d (P<0.01). Color change of bulk-fill composite resin was greater than that of the conventional one after coffee staining and is also a function of increment thicknesses.

scholarly journals Color stability of esthetic coatings applied to nickel-titanium archwires

2017 ◽  
Vol 46 (5) ◽  
pp. 307-311
Author(s):  
Marcus Vinicius Neiva Nunes do REGO ◽  
Geórgia Wain Thi LAU ◽  
Yago Carneiro ARAÚJO ◽  
Rayssa Melo e SILVA
Keyword(s):  
Epoxy Resin ◽  
Color Change ◽  
Color Stability ◽  
Surface Characteristics ◽  
Nickel Titanium ◽  
Staining Solution ◽  
Color Changes ◽  
Significant Difference ◽  
Total Color Change ◽  
Coating Type

Abstract Introduction Color stability is an important feature to be considered when using esthetic coated archwires. Objective To evaluate color changes on the surface of esthetic nickel-titanium archwires coated with Teflon (Ortho Organizers, USA) or epoxy resin (Tecnident, Brazil) after immersion in staining solution. Material and method Twelve 20-mm-long wire segments were used for each type of coating, which were mounted as two test specimens with a width of 7 mm each. The buccal surface of the archwires was evaluated for fluorescence and color measurements both at baseline and after immersion in a staining solution for 21 days using the VITA Easyshade® Compact spectrophotometer (Model DEASYC220). Differences in total color change according to coating type were compared using an independent samples t-test (p<0.05). The surface characteristics of as-received coated archwires were assessed using scanning electron microscopy. Result Color changes were observed on the esthetic coatings, with a significant difference between the two brands analyzed. Surface analysis revealed flaws such as wear, pitting, elevations, lack of material, granulation, grooves, cracks, and lack of standardization in the coating process in all as-received archwires, but flaws were less evident in epoxy-resin coatings. Conclusion The two esthetic coatings did not show color stability, but Teflon coatings showed a more intense color change than epoxy-resin coatings.

The Effect of Bleaching Agents on the Color Stability of Ceromer and Porcelain Restorative Materials In Vitro

2012 ◽  
Vol 38 (1) ◽  
pp. E1-E8 ◽  
Author(s):  
HB Kara ◽  
F Aykent ◽  
B Ozturk
Keyword(s):  
Color Change ◽  
Glass Ceramics ◽  
In Vitro Study ◽  
Color Stability ◽  
Color Changes ◽  
Bleaching Procedure ◽  
Significant Difference ◽  
Restorative Materials ◽  
The Difference

SUMMARY Purpose The aim of this in vitro study was to determine the color changes of five different restorative materials after exposing these materials to two different home bleaching agents. Methods This study applied bleaching agents to an ultralow-fusing porcelain, a low-fusing porcelain, two types of heat-pressed glass ceramics, and a ceromer. A total of 24 disc-shaped specimens were fabricated (with a diameter of 10 mm and a thickness of 2 mm) from each material (n=12). The initial color measurements were taken with a spectrophotometer. The first set of specimens were bleached with 10% hydrogen peroxide (HP) for one hour daily for 10 days. The other set of specimens were bleached with 10% carbamide peroxide (CP) bleaching gel for eight hours daily for 14 days. Data were analyzed with the one-way analysis of variance and Kruskal-Wallis statistical test. The difference in the prebleaching and postbleaching color of each material was considered to be statistically significant at p &lt; 0.05. Results The study found a statistically significant difference among the color changes of the test groups after exposing them to both bleaching agents (p&lt;0.05). Appreciable color change was observed in the Estenia (ΔE=3.99) specimens that were bleached with the HP, and noticeable color changes were observed in the Estenia (ΔE=1.89) and IPS Empress 2 (ΔE=1.66) groups when they were treated with the CP. Conclusions Restorations (especially polymer-containing restorative materials) should be protected before any bleaching procedure due to the high risk of color change.

scholarly journals Benefits and challenges in conducting long-term growth hormone therapy in patients with Prader-Willi syndrome

Genetika ◽  
2020 ◽  
Vol 52 (1) ◽  
pp. 149-160
Author(s):  
Olga Antonova ◽  
Hadil Kathom ◽  
Evgeni Grigorov ◽  
Rada Staneva ◽  
Savina Hadjidekova ◽  
...  
Keyword(s):  
Growth Hormone ◽  
Statistical Analysis ◽  
Uniparental Disomy ◽  
Prader Willi Syndrome ◽  
Gh Treatment ◽  
Maternal Uniparental Disomy ◽  
Significant Difference ◽  
Genetic Mechanisms ◽  
Post Hoc

The purpose of this report is to comment the results from long-term growth hormone (GH) treatment of Bulgarian patients suffering from rare genetic disease-Prader-Willi syndrome (PWS) with reference to the age, body composition, complications and genetic etiology. Statistical analysis was performed by ANOVA with post hoc Kruskal-Wallis test and Dunn's multiple comparison tests. In 90% of the patients maternal uniparental disomy (mUPD) was found to be the cause of the disease. No cases due to imprinting defects are found. The BMI data shows no statistically significant difference between BMI at diagnosis (21.850), at the beginning of the GH therapy (21.852) and current BMI (24.09) - measured under the GH background. Early GH treatment allows to overcome arising obstacles in time and to improve the quality of life for PWS children and their families. During the fourteen years study period only ten patients were diagnosed with the disease. Ninety percent (n=9) of the children were found to be with maternal UPD (mUPD) and only one case was due to deletion in 15q11-13. These results are in agreement with other studies in the field which shows the need for reassessment and new robust statistical analysis of the frequency of genetic mechanisms for PWS.

scholarly journals The Effects of Mouthwashes on the Color Stability of Resin-Based Restorative Materials

2020 ◽  
pp. 346-357
Author(s):  
Ayşe Tuğba Ertürk-Avunduk ◽  
Seçkin Aksu ◽  
Ebru Delikan
Keyword(s):  
Analysis Of Variance ◽  
Color Change ◽  
Resin Composite ◽  
Color Stability ◽  
Multiple Comparison ◽  
Color Measurement ◽  
Distilled Water ◽  
Significant Difference ◽  
Restorative Materials ◽  
Post Hoc

Objective: This study investigated the effects of three types of mouthwash on the color stability of three resin-based restorative materials (nanohybrid resin composite, sonic-activated bulk-fill material, and compomer). Materials and Methods: To this end, 120 cylindrical disc specimens were prepared and polished, after which they were incubated in distilled water for 24 hours for post-polymerization. The baseline color values of each specimen were measured with a spectrophotometer, then the specimens were randomly divided into four groups. Following immersion in the mouthwashes for 24 hours, the specimens were rinsed with distilled water and dried before the color measurement was repeated. The values of color change (∆E₀₀) were subsequently calculated. A two-way analysis of variance and Duncan’s post hoc multiple comparison tests were conducted to determine statistically significant differences among the restorative materials. Results: All samples showed discoloration after immersion, albeit some instances of discoloration were imperceptible. In this respect, a statistically significant difference was found among the restorative materials and mouthwashes (p<0.05). Imperceptible ∆E₀₀ values were derived on the nanohybrid resin composite and compomer, but perceptible and acceptable ∆E₀₀ values were detected on the sonic-activated bulk-fill materials (p<0.05). The clinically unacceptable discoloration was observed on the sonic-activated bulk-fill composite immersed in Listerine®. Conclusions: Clinicians should make recommendations based on the potential staining capacity of mouthwashes prescribed for daily use in restorative materials. In this way, the need for renewal of restorations due to discoloration could be avoided.

Sign in / Sign up

Export Citation Format

Share Document