The Common but Complicated Tool: Review of Embolic Materials for the Interventional Radiologist

2021 ◽  
Vol 38 (05) ◽  
pp. 535-541
Author(s):  
Shamar Young ◽  
Nassir Rostambeigi ◽  
Jafar Golzarian
Keyword(s):  
Interventional Radiology ◽  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
Interventional Radiologist ◽  
Embolic Agents ◽  
The Common ◽  
Embolic Materials ◽  
Physical And Chemical ◽  
And Chemical Properties

AbstractEmbolization is an important and widely utilized technique in interventional radiology. There are a variety of different categories and individual products which can be utilized to perform embolization. Understanding the different classes of embolic agents, the important features of each of these classes including strengths and limitations, and the variation in individual products within the classes is critical for interventional radiologist to practice safely and effectively. This article reviews the different kinds of embolics and relays some of the pertinent physical and chemical properties of individual products which should be considered when determining which embolic to select for a given purpose.

Salting-out and salting-in experiments with lignosulfonates (LSs)

Holzforschung ◽  
2013 ◽  
Vol 67 (5) ◽  
pp. 549-557 ◽  
Author(s):  
Bernt O. Myrvold
Keyword(s):  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
Salting Out ◽  
Practical Applications ◽  
Common Ion ◽  
The Common ◽  
Common Ion Effect ◽  
The Stability ◽  
Physical And Chemical ◽  
And Chemical Properties

Abstract The solubility of lignosulfonates (LSs) in water is strongly dependent on other ions present in the water phase. The differences in the solubility might strongly influence the measurements of the physical and chemical properties of the LS molecules. A reduced solubility of the LS might also affect its utility in many practical applications. The understanding of the interaction between LSs and various salts is important for both practical and theoretical reasons. Therefore, the effect of salt concentrations on the LS has been investigated for 41 different salts with 14 different cations and 16 different anions. The observations cannot be explained by the common ion effect or the screening effects. On the contrary, it was found that the stability of LS solutions follows the Hofmeister series, with the exception of those ions that will chemically interact with the LS molecule. Moreover, the positions of phosphate (HPO42-) and sulfate (SO42-) ions were reversed.

scholarly journals Comparative Analysis of the Physical and Chemical Properties of Uzbekistan's Basalts and Ways of Solutions to the Problems of Choice of Raw Processing Directions

Land Science ◽  
2019 ◽  
Vol 1 (1) ◽  
pp. p59
Author(s):  
Nurmatov J. T. ◽  
Kurbanov A. A. ◽  
Rashidova R. K.
Keyword(s):  
Comparative Analysis ◽  
Chemical Composition ◽  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
Test Report ◽  
The Future ◽  
The Common ◽  
Physical And Chemical ◽  
And Chemical Properties

This article highlights the common use of petrographic processes in basalt processing. At present, basalt is being processed by liquefaction only. Heat fibers, tiles, cement, fittings, and nets are taken from the basalt. For this reason this article states that the range of products to be purchased is small. And to increase the assortment, it is proved by the fact that basalt basin should not be confined to liquefied processing. Chemical composition of basalt. Depending on the chemical composition of the basalt, the technology of their processing is selected and determined. The article is based on the same principle that the dry method of drying basalt without liquefaction is put forward. Below are the names of products that can be obtained on dry bases processing. This is justified by the fact that it increases the range of basalt products. However, it is advisable to follow two methods of basalt processing in the future. These methods, which are recommended by the authors, have undergone a production trial and received positive assessments; the test report has also been presented.

Statistical criteria of stellar population types

1966 ◽  
Vol 24 ◽  
pp. 101-110
Author(s):  
W. Iwanowska
Keyword(s):  
Stellar Population ◽  
Chemical Properties ◽  
Spectrophotometric Study ◽  
Physical And Chemical Properties ◽  
Population Type ◽  
The Galaxy ◽  
Distribution Parameters ◽  
Physical And Chemical ◽  
Statistical Criteria ◽  
And Chemical Properties

In connection with the spectrophotometric study of population-type characteristics of various kinds of stars, a statistical analysis of kinematical and distribution parameters of the same stars is performed at the Toruń Observatory. This has a twofold purpose: first, to provide a practical guide in selecting stars for observing programmes, second, to contribute to the understanding of relations existing between the physical and chemical properties of stars and their kinematics and distribution in the Galaxy.

Response of corn (Zea mays L.) to various organic-based fertilizers in marginal upland of Sta. Rita, Samar

2017 ◽  
pp. 31-43
Author(s):  
Berta Ratilla ◽  
Loreme Cagande ◽  
Othello Capuno
Keyword(s):  
Block Design ◽  
Management Strategies ◽  
Chemical Properties ◽  
Organic Fertilizers ◽  
Growth And Yield ◽  
Physical And Chemical Properties ◽  
Total N ◽  
Randomized Complete Block Design ◽  
Physical And Chemical ◽  
And Chemical Properties

Organic farming is one of the management strategies that improve productivity of marginal uplands. The study aimed to: (1) evaluate effects of various organic-based fertilizers on the growth and yield of corn; (2) determine the appropriate combination for optimum yield; and (3) assess changes on the soil physical and chemical properties. Experiment was laid out in Randomized Complete Block Design, with 3 replications and 7 treatments, namely; T0=(0-0-0); T1=1t ha-1 Evans + 45-30-30kg N, P2O5, K2O ha-1; T2=t ha-1 Wellgrow + 45-30-30kg N, P2O5, K2O ha-1; T3=15t ha-1 chicken dung; T4=10t ha-1 chicken dung + 45-30-30kg N, P2O5, K2O ha-1; T5=15t ha-1 Vermicast; and T6=10t ha-1 Vermicast + 45-30-30kg N, P2O5, K2O ha-1. Application of organic-based fertilizers with or without inorganic fertilizers promoted growth of corn than the control. But due to high infestation of corn silk beetle(Monolepta bifasciata Horns), its grain yield was greatly affected. In the second cropping, except for Evans, any of these fertilizers applied alone or combined with 45-30-30kg N, P2O5, K2O ha-1 appeared appropriate in increasing corn earyield. Soil physical and chemical properties changed with addition of organic fertilizers. While bulk density decreased irrespective of treatments, pH, total N, available P and exchangeable K generally increased more with chicken dung application.

Sign in / Sign up

Export Citation Format

Share Document