NAFTA: The Process of Regional Integration of Motor Vehicle Production

2004 ◽  
pp. 104-117 ◽  
Author(s):  
Jorge Carrillo
2015 ◽  
Vol 6 (2) ◽  
pp. 63-72 ◽  
Author(s):  
Marina Vives-Mestres ◽  
Josep A. Martín-Fernández

Abstract This paper introduces the most basic concepts of the compositional analysis of data with a simple but real example form the Management and Production Engineering (MPE) field. Compositional Data (CoDa) are vectors of positive elements that represent parts of a whole and are widely found in MPE, i.e. production times, resource composition, percentage utilization of work stands, waste components. . . The need for an analysis based on ratios of components (or better log-ratios of components) is illustrated step by step, and findings are compared to the corresponding standard methods applied to raw compositions. The paper also exposes the principles of CoDa analysis and presents two basic descriptive tools suitable for CoDa: the clr-biplot and the CoDa dendrogram. The example is a time series, from 1994 to 2013, of motor vehicle production in 8 countries and regions.


2019 ◽  
Vol 2 (2) ◽  
pp. 63
Author(s):  
Lince Muis ◽  
Ira Galih Prabasari ◽  
Nana Suyana

The productivity of Indonesia's tire industry is expected to be higher following the growth of domestic and global motor vehicle production. Along with that, waste used tires that are not used in the environment are increasing. Rubber-based tires, is one type of synthetic polymer (Polystyrene). Polystyrene cannot be easily recycled so that the processing of polystyrene waste must be done properly so as not to harm the environment. Polystyrene pyrolysis process is one way to minimize the polystyrene waste. The pirlolysis process is carried out with temperature operating conditions of 400 oC, weight of tire rubber 3000 grams with variations of catalyst 2%, 4% and 6% for 3 hours. The results showed that the more catalysts used the% CHP Conversion produced would be greater, the best results on the 6% catalyst were as much as 41.073%. Based on the results of the analysis using GC-MS, Used inner tire pyrolysis oil has the following hydrocarbon chains: (C1-C5) as much as 0.33%, (C5-C12) as much as 88.96% and (C10-C28) 10.71%. Hydrocarbon compounds contained in the oil from used tire pyrolysis contain many aromatic compounds


2016 ◽  
Vol 37 (4) ◽  
pp. 684-708 ◽  
Author(s):  
Abbas Valadkhani ◽  
Russell Smyth

Purpose – The purpose of this paper is to examine the likely economy-wide impacts of the complete shutdown of the motor vehicle industry on output and employment in Australia using the latest input-output (IO) table (2009-2010). Design/methodology/approach – Both supply- and demand-driven IO models are employed to determine the extent, and pattern, of the resulting output and job losses in upstream and downstream industries. An analysis of the first-order field of influence is also conducted to observe how output multipliers in other sectors respond to changes in the self-use-input-requirement of the professional, scientific and technical services (PSTS) industry. Findings – The PSTS industry (with a significant research and development (R & D) component and the highest forward linkage index) would be hardest hit with the collapse of the motor vehicle industry. Research limitations/implications – This paper identifies a number of industries that are more likely to be heavily influenced by the resulting lack of R & D in the PSTS industry in the near future. Unless more funding is allocated to other research and technology-intensive industries, the extinction of the motor vehicle industry, coupled with the recent budgetary cuts for strategic organisations such as the Commonwealth Scientific and Industrial Research Organisation, can reduce the positive spillover effects of R & D activities on the Australian economy. Originality/value – This is the first study to examine the effects of the shutdown of the motor vehicle industry on employment in Australia. The results also have broader implications for other developed countries that have declining motor vehicle industries. The findings suggest that the global decline in the motor vehicle industry can adversely affect investment in R & D in upstream and downstream industries. More generally, the results suggest that the shift in motor vehicle production to developing countries, will contribute to increased R & D intensity in them at the expense of developed countries.


2013 ◽  
Vol 13 (1) ◽  
pp. 129-150 ◽  
Author(s):  
Andrew Marks

Trade liberalization and reinforcing industry-specific assistance measures have been instrumental in globalizing the Australian textile, clothing, footwear (TCF) and motor vehicle industries by re-orienting production from the domestic to international market. As a result, output and has contracted in the former industry whilst expanding in the latter industry. These results are in line with TCF and motor vehicle production in other western market economies. This, in turn, indicates that labour intensive industries are likely to be contracting whilst capital intensive industries dominate production in these economies. This has important implication for manpower policies in that they need to be formulated to upgrade the skills of the labour force in order to facilitate the expanding production of capital intensive goods, thereby promote employment growth in the long run.


2018 ◽  
Author(s):  
Andysah Putera Utama Siahaan

The development of the era improves electronic technology to support human needs for transportation. Many vehicles created have the latest and most sophisticated features. The growth of vehicle production is increasing. One of them is a motorized vehicle. It also affects criminal acts that will increase, such as cases of vehicle theft. Motor vehicle theft cases often occur. It is because there is still a lack of security systems contained in the vehicle. Even though the vehicle is equipped with an anti-theft system, this does not affect theft. Generally, motorized vehicles currently only use dual and electric keys. The importance of a tracking device to see the location of the car will be very influential to monitor the existence of the vehicle. Tools such as GPS Tracker are one that can be used to reduce the theft of a vehicle. This review will discuss GT06N during installation in a vehicle. This GPS can help vehicle owners always be aware of the existence of vehicles anywhere, whether from SMS or the Internet. GT06N already supports real-time location with excellent accuracy.


2021 ◽  
pp. 1-24
Author(s):  
MARGARITA VILAR-RODRÍGUEZ ◽  
RAFAEL VALLEJO-POUSADA

Abstract The development of motor vehicles and their mass production and consumption during the first decades of the twentieth century had significant economic and social effects. The developed Atlantic countries, world leaders in vehicle production, were the protagonists of the success of the car. However, the globalization brought about by the second industrial revolution drew in other countries on the periphery, thanks to transport technologies, telecommunications, and the media. Thus, the consumption patterns and lifestyles of the ‘centres’ and the ‘peripheries’ tended to become more uniform, especially among the urban population. This included an interest in travelling and leisure activities in general. The link between the use of motor vehicles and new tourism practices in Spain between 1918 and 1939 provides an excellent viewpoint from which both to analyse the country's economic and social transformation during this period and to relativize the degree of backwardness observed in Spain in other studies. In this respect, we provide evidence which shows that, despite being a country of the so-called European periphery, Spain had similar patterns of consumption of durable consumer goods, such as the motor vehicle, as other, more advanced countries. There is therefore room to reconsider what has been termed ‘Spanish backwardness’.


2021 ◽  
Vol 2 (2) ◽  
pp. 241-245
Author(s):  
Ida Bagus Mayun Andika Putra ◽  
Nyoman Gede Sugiartha ◽  
I Nyoman Subarnia

Cases in vehicle catching often occur given the increasing number of vehicle production increases. Someone commits the crime of motor vehicle theft because they want to own it, but the economy does not allow it to buy legally. One of the efforts to realize this is through restructuring because the price is much cheaper than the official price. The purpose of this research is to reveal the judges' considerations in the decision of car arresting cases and the criminal sanctions for car arresting offenders. The research method used is a normative research method with a conceptual approach and a case approach. The sources of legal materials used are primary and secondary sources of law. The technique of collecting legal materials is done by recording, quoting, reading, and summarizing the literature that refers to the judge's consideration in the decision of the car arresting case. After the legal materials are collected, they are analyzed systematically. The results of the study reveal that Article 480 of the Criminal Code is used as a criminal sanction for detention if the defendant is found guilty.


2007 ◽  
Vol 12 (3) ◽  
pp. 4-7
Author(s):  
Charles N. Brooks ◽  
Christopher R. Brigham

Abstract Multiple factors determine the likelihood, type, and severity of bodily injury following a motor vehicle collision and, in turn, influence the need for treatment, extent of disability, and likelihood of permanent impairment. Among the most important factors is the change in velocity due to an impact (Δv). Other factors include the individual's strength and elasticity, body position at the time of impact, awareness of the impending impact (ie, opportunity to brace, guard, or contract muscles before an impact), and effects of braking. Because Δv is the area under the acceleration vs time curve, it combines force and duration and is a useful way to quantify impact severity. The article includes a table showing the results of a literature review that concluded, “the consensus of human subject research conducted to date is that a single exposure to a rear-end impact with a Δv of 5 mph or less is unlikely to result in injury” in most healthy, restrained occupants. Because velocity incorporates direction as well as speed, a vehicular occupant is less likely to be injured in a rear impact than when struck from the side. Evaluators must consider multiple factors, including the occupant's pre-existing physical and psychosocial status, the mechanism and magnitude of the collision, and a variety of biomechanical variables. Recommendations based solely on patient history and physical findings (and, perhaps, imaging studies) may be ill-informed.


Sign in / Sign up

Export Citation Format

Share Document