Effect of Differential Thermal Stresses on the Fire Resistance of Composite Columns with Hollow Section

Author(s):  
C. Renaud ◽  
J. M. Aribert ◽  
B. Zhao
2017 ◽  
pp. 73-79
Author(s):  
Tretyakov Alexey ◽  
Tkalenko Illia ◽  
Wald František ◽  
Novak Josef ◽  
Stefan Radek ◽  
...  

2019 ◽  
Vol 22 (11) ◽  
pp. 2418-2434 ◽  
Author(s):  
Feng Zhou ◽  
Ben Young

Experimental and numerical investigations of concrete-filled double-skin aluminium stub column with a circular hollow section as the outer skin and a square hollow section as the inner skin are presented in this article. A test program was carried out to study the influences of aluminium tube geometric dimensions and concrete strength on structural performance and strength of composite columns. A series of composite columns was tested on outer circular hollow section tubes and inner square hollow section tubes; the spaces between them had been filled with concrete of different nominal cylinder strengths of 40, 70 and 100 MPa. The tubes were fabricated by extrusion using 6061T6 heat-treated aluminium alloy having a nominal 0.2% proof stress of 240 MPa. A non-linear finite element model was developed and verified against experimental results. The test and numerical results were compared with the design strengths to evaluate the applicability of the design rules in the American specifications for aluminium and concrete structures. In addition, the proposed design equations, developed by the authors for concrete-filled double-skin aluminium tubular stub columns with circular hollow section as both outer and inner skins, were used to calculate the design strengths and compared with the experimental and numerical results obtained in this study. The proposed design equations also predicted the ultimate strengths of the concrete-filled double-skin aluminium tubular stub columns accurately with circular hollow section as the outer skin and square hollow section as the inner skin.


2012 ◽  
Vol 472-475 ◽  
pp. 1206-1214 ◽  
Author(s):  
In Kyu Kwon ◽  
Heung Youl Kim ◽  
Hyung Jun Kim

Fire resistance is required to sustain the structural stability when building elements are exposed to a severe fire condition. To evaluate the fire resistance of structural members such as columns and beams, fire engineers can apply either prescriptive methods or performance-based fire design. These two kinds of fire resistance evaluation methods have been developed independently and performance fire design consists mainly of an advanced and simple methods. The simple method stipulated in New Zealand and the U.K. use the limiting temperature. The values of the limiting temperatures of structural steel members were shown in the BS, SNZ, etc but the temperatures of individuals were not classified. In general steel columns were made of H-section but recently the hollow section is inclined to increase for its higher resistant of structural stabilities than any other sections. But the hollow section shows different pattern when it carry out the loads in the cold and is expected to show different behavior when it is exposed to fire. Therefore the limiting temperature of the hollow section is required for evaluation of fire resistance. The paper is to make the limiting temperature of the circular hollow section (CHS) with or without filling of concrete and variance of applied loads.


2008 ◽  
Vol 64 (3) ◽  
pp. 312-325 ◽  
Author(s):  
Zhan-Fei Huang ◽  
Kang-Hai Tan ◽  
Wee-Siang Toh ◽  
Guan-Hwee Phng

2007 ◽  
Vol 63 (4) ◽  
pp. 437-447 ◽  
Author(s):  
Zhan-Fei Huang ◽  
Kang-Hai Tan ◽  
Guan-Hwee Phng

2021 ◽  
Vol 12 (2) ◽  
pp. 189-202
Author(s):  
Bishir Kado ◽  
Shahrin Mohammad ◽  
Yeong Huei Lee ◽  
Poi Ngian Shek ◽  
Mariyana Aida Ab Kadir

Reduction in self-weight and achievement of full fire resistance requirements are some of the important considerations in the design of high-rise structures. Lightweight concrete filled steel tube (CFST) column provides an alternative method to serve these purposes. Recent studies on lightweight CFST columns at ambient temperature have revealed that foamed concrete can be a beneficial and innovative alternative material. Hence, this study investigates the potential of using foamed concrete in circular hollow steel columns for improving fire resistance. A series of nine fire test on circular unfilled hollow and foamed concrete filled hollow section column were carried out. ISO 834 standard fire exposure test were carried out to investigate the structural response of these columns under fire. The main parameters considered are load level and foamed concrete density; foamed concrete density used are 1500 kg/m3 and 1800 kg/m3 at 15%, 20%, and 25% load level. All the columns tested are without any external fire protection, with concentrically applied load under fixed-fixed boundary conditions. The columns dimension was 2400 mm long, 139.7 mm diameter and steel tube thickness of 6 mm. The fire test result showed that foamed concrete increases the fire resistance of steel hollow column up to an additional 16 minutes. The improvement is more at load level above 15%, and the gain in fire resistance is about 71% when 1500 kg/m3 density foamed concrete is used. Generally, foamed concrete filled steel hollow column demonstrate a good structural fire behavior, based on the applied load and foamed concrete density. Also, inward local buckling was averted by filling the steel hollow column with foamed concrete. General method for composite column design in Eurocode 4 adopted to calculate the axial buckling load of 1500 kg/m3 foamed concrete filled columns.  These type of columns can be used for structures like airports, schools, and stadiums; taking the advantage of exposed steel for aesthetic purpose and high fire resistance. It can also be used for high rise structures; taking advantage of high fire resistance and reduction in self-weight of a structure.


2017 ◽  
Vol 10 (3) ◽  
pp. 592-625
Author(s):  
J. G. R. NETO ◽  
A. M. SARMANHO

ABSTRACT This work includes an analytical and experimental study of the structural behavior of shear connectors in composite columns, composed of concrete-filled circular hollow section. For this study was adopted a structural bolt like a shear connector in order to verify the validity of the analytical expressions in ABNT NBR 16239: 2014 [1]. Was carried out a series of push-out tests, fixing the outer diameter of the hollow section and varying the thickness, the bolt diameter, the strength of concrete and the hole dimension. Analysis of the results shows that is possible to use this type of shear connector. The Brazilian prescriptions results are conservative and may be adjusted to provide strength capacity value closest to the experiment.


2012 ◽  
Vol 9 (1) ◽  
pp. 952-956
Author(s):  
Faqi Liu ◽  
Hua Yang ◽  
Ye Tao ◽  
Sumei Zhang

Sign in / Sign up

Export Citation Format

Share Document