Numerical simulation of SHPB to measure the mechanical properties of aluminium foam material at high strain rate by using MAT 163 modified crushable foam

2017 ◽  
Author(s):  
Afdhal ◽  
Annisa Jusuf ◽  
Leonardo Gunawan ◽  
Sigit P. Santosa ◽  
Tatacipta Dirgantara ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Numerical Simulation ◽  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Aluminium Foam ◽  
Foam Material

Viscoplastic Constitutive Model for High Strain Rate Mechanical Properties of SAC-Q Leadfree Solder After High-Temperature Prolonged Storage

2018 ◽  
Author(s):  
Pradeep Lall ◽  
Vikas Yadav ◽  
Jeff Suhling ◽  
David Locker
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
High Strain Rate ◽  
Strain Rate ◽  
Thermal Aging ◽  
High Strain ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Test ◽  
Aging Effects ◽  
Model Predictions

Electronics in automotive underhood and downhole drilling applications may be subjected to sustained operation at high temperature in addition to high strain-rate loads. SAC solders used for second level interconnects have been shown to experience degradation in high strain-rate mechanical properties under sustained exposure to high temperatures. Industry search for solutions for resisting the high-temperature degradation of SAC solders has focused on the addition of dopants to the alloy. In this study, a doped SAC solder called SAC-Q solder have been studied. The high strain rate mechanical properties of SAC-Q solder have been studied under elevated temperatures up to 200°C. Samples with thermal aging at 50°C for up to 6-months have been used for measurements in uniaxial tensile tests. Measurements for SAC-Q have been compared to SAC105 and SAC305 for identical test conditions and sample geometry. Data from the SAC-Q measurements has been fit to the Anand Viscoplasticity model. In order to assess the predictive power of the model, the computed Anand parameters have been used to simulate the uniaxial tensile test and the model predictions compared with experimental data. Model predictions show good correlation with experimental measurements. The presented approach extends the Anand Model to include thermal aging effects.

The Influence of the Mechanical Properties of Thin Pure Titanium Plates on High Strain-Rate Deformation

2004 ◽  
Vol 43 (10) ◽  
pp. 7192-7199 ◽  
Author(s):  
Fumikazu Saito ◽  
Kensuke Fujihata ◽  
Takuyasu Hashiguchi ◽  
Toshitika Usui ◽  
Hideki Tamura
Keyword(s):  
Mechanical Properties ◽  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Pure Titanium ◽  
High Strain Rate Deformation

scholarly journals Dynamic Mechanical Properties and Microstructure of an (Al0.5CoCrFeNi)0.95Mo0.025C0.025 High Entropy Alloy

Entropy ◽  
2019 ◽  
Vol 21 (12) ◽  
pp. 1154
Author(s):  
Bingfeng Wang ◽  
Chu Wang ◽  
Bin Liu ◽  
Xiaoyong Zhang
Keyword(s):  
Mechanical Properties ◽  
Shear Band ◽  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Dynamic Mechanical Properties ◽  
High Entropy Alloy ◽  
Face Centered Cubic ◽  
High Entropy ◽  
Dynamic Mechanical

The dynamic mechanical properties and microstructure of the (Al0.5CoCrFeNi)0.95Mo0.025C0.025 high entropy alloy (HEA) prepared by powder extrusion were investigated by a split Hopkinson pressure bar and electron probe microanalyzer and scanning electron microscope. The (Al0.5CoCrFeNi)0.95Mo0.025C0.025 HEA has a uniform face-centered cubic plus body-centered cubic solid solution structure and a fine grain-sized microstructure with a size of about 2 microns. The HEA possesses an excellent strain hardening rate and high strain rate sensitivity at a high strain rate. The Johnson–Cook plastic model was used to describe the dynamic flow behavior. Hat-shaped specimens with different nominal strain levels were used to investigate forced shear localization. After dynamic deformation, a thin and short shear band was generated in the designed shear zone and then the specimen quickly fractured along the shear band.

Sign in / Sign up

Export Citation Format

Share Document