Assessment of energy efficiency in college of engineering (COE) building, Universiti Tenaga Nasional (UNITEN) Putrajaya using light-emission diode (LED) lighting

2018 ◽  
Author(s):  
Daud Mohamad ◽  
Mohd Zakwan Ramli ◽  
Nazirul Mubin Zahari ◽  
Mohd Hafiz Zawawi ◽  
A. H. N. Haneesa ◽  
...  
2021 ◽  
Vol 11 (13) ◽  
pp. 6005
Author(s):  
Daniel Villanueva ◽  
Moisés Cordeiro-Costas ◽  
Andrés E. Feijóo-Lorenzo ◽  
Antonio Fernández-Otero ◽  
Edelmiro Miguez-García

The aim of this paper is to shed light on the question regarding whether the integration of an electric battery as a part of a domestic installation may increase its energy efficiency in comparison with a conventional case. When a battery is included in such an installation, two types of electrical conversion must be considered, i.e., AC/DC and DC/AC, and hence the corresponding losses due to these converters must not be forgotten when performing the analysis. The efficiency of the whole system can be increased if one of the mentioned converters is avoided or simply when its dimensioning is reduced. Possible ways to achieve this goal can be: to use electric vehicles as DC suppliers, the use of as many DC home devices as possible, and LED lighting or charging devices based on renewables. With all this in mind, several scenarios are proposed here in order to have a look at all possibilities concerning AC and DC powering. With the aim of checking these scenarios using real data, a case study is analyzed by operating with electricity consumption mean values.


2021 ◽  
Vol 25 (1) ◽  
Author(s):  
Earl Opiso ◽  
◽  
Ariel Abay ◽  
Cleifford Alfarero ◽  
◽  
...  

Energy, Energy Audit, Energy Efficiency


2013 ◽  
Vol 59 (1) ◽  
pp. 70-76 ◽  
Author(s):  
Jinsung Byun ◽  
Insung Hong ◽  
Byoungjoo Lee ◽  
Sehyun Park

2018 ◽  
Vol 19 (2) ◽  
pp. 154-163 ◽  
Author(s):  
Mehmet Sait Cengiz ◽  
ÇIĞDEM CENGIZ

ABSTRACT:  It is necessary to periodically maintain lighting equipment in accordance with international standards. Contamination of lamps caused by long-term use of lighting equipment will result in loss of Luminous Flux and optical losses. The decrease in lighting performance poses a visual difficulty for drivers and causes accidents. In this study, the total Maintenance Factor is numerically examined by considering the losses of diffuser and lens for LED lamps used in tunnel lighting. The variation of luminaries performance with years considering Maintenance Factors as regards environmental conditions and features of the luminaries is evaluated to demonstrate the importance of tunnel lighting maintenance. Moreover, to show the importance of LED lamps Maintenance Factor, the variation of illumination levels of LED lamps is analysed under different Maintenance Factors. It is observed that enhancing Maintenance Factor would contribute to energy efficiency. ABSTRAK: Penjagaan peralatan cahaya secara berkala mengikut piawai kebangsaan adalah amat penting. Pencemaran lampu disebabkan penggunaan peralatan cahaya pada jangka panjang akan menyebabkan kehilangan kilauan kerdipan lampu dan optik. Pengurangan pencahayaan ini menyebabkan kesukaran pandangan pada pemandu dan menyebabkan kemalangan jiwa. Kajian ini mengkaji tentang jumlah Faktor Penjagaan secara numerik dengan mengambil kira pengurangan difuser dan kanta pada lampu LED yang digunakan dalam terowong pencahayaan. Faktor Penjagaan pada perubahan kilauan berdasarkan tahun mengambil kira keadaan sekeliling dan ciri khas kilauan. Tambahan, ini dinilai bagi menunjukkan kepentingan penjagaan terowong pencahayaan dan kepentingan Faktor Penjagaan Lampu LED. Perubahan pada tahap terang pada lampu LED dikaji dengan mengambil kira Faktor Penjagaan. Peningkatan pada Faktor Penjagaan telah didapati dapat menjimatkan tenaga.


2017 ◽  
pp. 193-198
Author(s):  
E. Eyüboğlu ◽  
S. Yıldız ◽  
Ö. Uğurlu ◽  
U. Yıldırım ◽  
F.B. Demirel

Author(s):  
I. I. Bayneva ◽  
V. I. Shkarin

The article discusses the main issues of energy conservation in lighting in the face of a growing shortage of energy resources. Estimated reserves of energy savings in lighting. The urgent tasks of designing modern lighting make it possible to identify the most efficient light sources and lighting devices, ways to ensure energy and lighting savings, and ways to increase the energy efficiency of an industrial plant lighting system. The basic provisions for the use of LED lighting devices for lighting industrial premises are given. The requirements for artificial production lighting, regulated by various regulatory documents, are considered. The possibilities of DiaLux program for lighting modeling are analyzed. Lighting projects have been developed for various sections of the galvanic shop with LED lights in DIALux. A comparative analysis of the energy efficiency of indoor lighting projects using LED and fluorescent lamps demonstrates the obvious use of LED lighting devices for lighting industrial premises.


2020 ◽  
Vol 12 (18) ◽  
pp. 7684
Author(s):  
Rami David Orejón-Sánchez ◽  
Manuel Jesús Hermoso-Orzáez ◽  
Alfonso Gago-Calderón

Nowadays, LED lighting technology reaches a higher Value of Energy Efficiency in Installations (VEEI) (W/m2*100 lux) than current luminaire lighting due to the number of lumens per watt that these are able to generate, as well as the directional nature of their emissions together with the adjustment capability through concentrator lenses with beam graduations that reach 5º. This achieves energy savings of up to 80%. Furthermore, also considering the substantial decrease in flickers, and that it noticeably improves usage of ultra-slow-motion cameras and the fading of switching-on or rearm times upon failure, LED technology stands out as the main solution for illumination of professional sports facilities. This article describes the evolution of regulatory requirements that are being imposed by the governing institutions of sports (FIFA, UEFA, FIBA, etc.) and professional leagues (LaLiga, Euroliga, etc.) in order to guarantee their competence as high-quality television products. In addition, the trends in requirements and specifications regarding lighting equipment and its installation, which are intended to convert stadiums into optimized centers for the celebration and dissemination of mass events, are analyzed (settings, photometry, etc.), particularly those concerning horizontal, vertical, and camera illuminance, average and extreme uniformities, glare, reduction of intrusive light in bleachers, flickers, color rendering index (CRI), correlated color temperature (CCT), and start-up times.


Author(s):  
Ding Qing ◽  
Liang Xiuying ◽  
Zhao Yuejin ◽  
Lin Ling ◽  
Li Pengcheng

Sign in / Sign up

Export Citation Format

Share Document