Predication of forming forces in single point incremental forming by using finite element simulations and validation of it with experimental results

2020 ◽  
Author(s):  
Rohit A. Magdum ◽  
C. Pandivelan
Keyword(s):  
Finite Element ◽  
Incremental Forming ◽  
Single Point ◽  
Finite Element Simulations ◽  
Experimental Results ◽  
Single Point Incremental Forming

Forming forces in single point incremental forming: prediction by finite element simulations, validation and sensitivity

2010 ◽  
Vol 47 (5) ◽  
pp. 573-590 ◽  
Author(s):  
C. Henrard ◽  
C. Bouffioux ◽  
P. Eyckens ◽  
H. Sol ◽  
J. R. Duflou ◽  
...  
Keyword(s):  
Finite Element ◽  
Incremental Forming ◽  
Single Point ◽  
Finite Element Simulations ◽  
Single Point Incremental Forming

scholarly journals Research on the Influencing Factors of "Scale Veins" of Single Point Incremental Forming Workpieces Surface

2015 ◽  
Vol 9 (1) ◽  
pp. 1025-1032
Author(s):  
Shi Pengtao ◽  
Li Yan ◽  
Yang Mingshun ◽  
Yao Zimeng
Keyword(s):  
Surface Quality ◽  
Incremental Forming ◽  
Single Point ◽  
Spindle Speed ◽  
Experimental Results ◽  
Feed Speed ◽  
Single Point Incremental Forming ◽  
Machining Parameters ◽  
The Mathematical Model

To furthermore optimize the machining parameters and improve the surface quality of the workpieces manufactured by single point incremental forming method, the formation mechanism of the sacle veins on the metal incremental froming workpieces was studied through experiment method. The influence principle of the spindle speed, the feed speed and the material of tip of tools on the length of scale veins was obtained through analyzing the experimental results and building the mathematical model among the length of scale veins were feed speed and spindle speed through measuring the roughness of surfaces and observing the appearance of the forming workpieces. The experimental results showed that, the spindle speed, the feed speed and the material of tool tips have a significant effect on the scale veins formation on the surface of forming workpieces. Therefore, an appropriate group of spindle speed and feed speed can reduce the effect of scale veins on the roughness of single point incremental forming workpieces and furthermore improve the surface quality of forming workpieces.

scholarly journals A recommendation of computation of normal streeses in single point incremental forming technology

2014 ◽  
Vol 17 (1) ◽  
pp. 21-28
Author(s):  
Dien Khanh Le ◽  
Nam Thanh Nguyen ◽  
Binh Thien Nguyen
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Incremental Forming ◽  
Single Point ◽  
Finite Element Method Simulation ◽  
Recent Decade ◽  
Work Piece ◽  
Single Point Incremental Forming ◽  
Forming Technology ◽  
Element Method

Single Point Incremental Forming (SPIF) has become popular for metal sheet forming technology in industry in many advanced countries. In the recent decade, there were lots of related studies that have concentrated on this new technology by Finite Element Method as well as by empirical practice. There have had very rare studies by pure analytical theory and almost all these researches were based on the formula of ISEKI. However, we consider that this formula does not reflect yet the mechanics of destruction of the sheet work piece as well as the behavior of the sheet in reality. The main aim of this paper is to examine ISEKI’s formula and to suggest a new analytical computation of three elements of stresses at any random point on the sheet work piece. The suggested formula is carefully verified by the results of Finite Element Method simulation.

scholarly journals Single point incremental forming simulation with adaptive remeshing technique using solid-shell elements

2016 ◽  
Vol 33 (5) ◽  
pp. 1388-1421 ◽  
Author(s):  
José I.V. Sena ◽  
Cedric Lequesne ◽  
L Duchene ◽  
Anne-Marie Habraken ◽  
Robertt A.F. Valente ◽  
...  
Keyword(s):  
Finite Element ◽  
Incremental Forming ◽  
Single Point ◽  
Nonlinear Material ◽  
Single Point Incremental Forming ◽  
Solid Shell ◽  
Contact Conditions ◽  
Adaptive Remeshing ◽  
Content Type ◽  
Shell Elements

Purpose – Numerical simulation of the single point incremental forming (SPIF) processes can be very demanding and time consuming due to the constantly changing contact conditions between the tool and the sheet surface, as well as the nonlinear material behaviour combined with non-monotonic strain paths. The purpose of this paper is to propose an adaptive remeshing technique implemented in the in-house implicit finite element code LAGAMINE, to reduce the simulation time. This remeshing technique automatically refines only a portion of the sheet mesh in vicinity of the tool, therefore following the tool motion. As a result, refined meshes are avoided and consequently the total CPU time can be drastically reduced. Design/methodology/approach – SPIF is a dieless manufacturing process in which a sheet is deformed by using a tool with a spherical tip. This dieless feature makes the process appropriate for rapid-prototyping and allows for an innovative possibility to reduce overall costs for small batches, since the process can be performed in a rapid and economic way without expensive tooling. As a consequence, research interest related to SPIF process has been growing over the last years. Findings – In this work, the proposed automatic refinement technique is applied within a reduced enhanced solid-shell framework to further improve numerical efficiency. In this sense, the use of a hexahedral finite element allows the possibility to use general 3D constitutive laws. Additionally, a direct consideration of thickness variations, double-sided contact conditions and evaluation of all components of the stress field are available with solid-shell and not with shell elements. Additionally, validations by means of benchmarks are carried out, with comparisons against experimental results. Originality/value – It is worth noting that no previous work has been carried out using remeshing strategies combined with hexahedral elements in order to improve the computational efficiency resorting to an implicit scheme, which makes this work innovative. Finally, it has been shown that it is possible to perform accurate and efficient finite element simulations of SPIF process, resorting to implicit analysis and continuum elements. This is definitively a step-forward on the state-of-art in this field.

scholarly journals Multistage Tool Path Optimisation of Single-Point Incremental Forming Process

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 6794
Author(s):  
Zhou Yan ◽  
Hany Hassanin ◽  
Mahmoud Ahmed El-Sayed ◽  
Hossam Mohamed Eldessouky ◽  
Joy Rizki Pangestu Djuansjah ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Processing Time ◽  
Incremental Forming ◽  
Single Point ◽  
Computational Time ◽  
Single Point Incremental Forming ◽  
Two Stage ◽  
Element Analysis ◽  
Wide Range

Single-point incremental forming (SPIF) is a flexible technology that can form a wide range of sheet metal products without the need for using punch and die sets. As a relatively cheap and die-less process, this technology is preferable for small and medium customised production. However, the SPIF technology has drawbacks, such as the geometrical inaccuracy and the thickness uniformity of the shaped part. This research aims to optimise the formed part geometric accuracy and reduce the processing time of a two-stage forming strategy of SPIF. Finite element analysis (FEA) was initially used and validated using experimental literature data. Furthermore, the design of experiments (DoE) statistical approach was used to optimise the proposed two-stage SPIF technique. The mass scaling technique was applied during the finite element analysis to minimise the computational time. The results showed that the step size during forming stage two significantly affected the geometrical accuracy of the part, whereas the forming depth during stage one was insignificant to the part quality. It was also revealed that the geometrical improvement had taken place along the base and the wall regions. However, the areas near the clamp system showed minor improvements. The optimised two-stage strategy successfully decreased both the geometrical inaccuracy and processing time. After optimisation, the average values of the geometrical deviation and forming time were reduced by 25% and 55.56%, respectively.

Single-point incremental forming of sheet metals: Experimental study and numerical simulation

2016 ◽  
Vol 231 (2) ◽  
pp. 301-312 ◽  
Author(s):  
Matteo Benedetti ◽  
Vigilio Fontanari ◽  
Bernardo Monelli ◽  
Marco Tassan
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Incremental Forming ◽  
Single Point ◽  
Integration Scheme ◽  
Al Alloy ◽  
Single Point Incremental Forming ◽  
Sheet Metals ◽  
Forming Process ◽  
Starting Point

In this article, the single-point incremental forming of sheet metals made of micro-alloyed steel and Al alloy is investigated by combining the results of numerical simulation and experimental characterization, performed during the process, as well as on the final product. A finite element model was developed to perform the process simulation, based on an explicit dynamic time integration scheme. The finite element outcomes were validated by comparison with experimental results. In particular, forming forces during the process, as well as the final shape and strain distribution on the finished component, were measured. The obtained results showed the capability of the finite element modelling to predict the material deformation process. This can be considered as a starting point for the reliable definition of the single-point incremental forming process parameters, thus avoiding expensive trial-and-error approaches, based on extensive experimental campaigns, with beneficial effects on production time.

Sign in / Sign up

Export Citation Format

Share Document