Lanthanum doping induced structural changes and their implications on ferroelectric properties of Hf1−xZrxO2 thin film

2020 ◽  
Vol 117 (9) ◽  
pp. 092902
Author(s):  
Furqan Mehmood ◽  
Thomas Mikolajick ◽  
Uwe Schroeder
Keyword(s):  
Thin Film ◽  
Structural Changes ◽  
Ferroelectric Properties ◽  
Lanthanum Doping

Microstructural and Ferroelectric Properties of a Chemical Solution Deposited Epitaxial PbZr0.5 Ti0.5O3 Thin Film on a SrRuO3/SrTiO3 Substrate

1999 ◽  
Vol 14 (4) ◽  
pp. 1190-1193 ◽  
Author(s):  
J. H. Kim ◽  
A. T. Chien ◽  
F. F. Lange ◽  
L. Wills
Keyword(s):  
Thin Film ◽  
Ferroelectric Properties ◽  
Chemical Solution ◽  
X Ray Diffraction ◽  
Solution Deposition ◽  
Chemical Solution Deposition Method ◽  
Transmission Electron ◽  
Saturation Polarization ◽  
Pzt Thin Film ◽  
Relationship Of

Epitaxial PbZr0.5Ti0.5O3 (PZT) thin films were grown on top of a SrRuO3 epitaxial electrode layer on a (100) SrTiO3 substrate by the chemical solution deposition method at 600 °C. The microstructure of the PZT thin film was investigated by x-ray diffraction and transmission electron microscopy, and the ferroelectric properties were measured using the Ag/PZT/SRO capacitor structure. The PZT thin film has the epitaxial orientational relationship of (001) [010]PZT ║ (001) [010]SRO ║ (001) [010]STO with the substrate. The remnant (Pr ) and saturation polarization (Ps) density were measured to be Pr ~ 51.4 µC/cm2 and Ps ~ 62.1 µC/cm2 at 5 V, respectively. Ferroelectric fatigue measurements show that the net-switching polarization begins to drop (to 98% of its initial value) after 7 × 108 cycles.

La-doped effect on the ferroelectric properties of Bi4Ti3O12–SrBi4Ti4O15 thin film fabricated by pulsed laser deposition

2002 ◽  
Vol 92 (9) ◽  
pp. 5420-5424 ◽  
Author(s):  
J. S. Zhu ◽  
D. Su ◽  
X. M. Lu ◽  
H. X. Qin ◽  
Y. N. Wang ◽  
...  
Keyword(s):  
Thin Film ◽  
Pulsed Laser Deposition ◽  
Ferroelectric Properties ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
La Doped

scholarly journals Effects of LaNiO3 Seed Layer on the Microstructure and Electrical Properties of Ferroelectric BZT/PZT/BZT Thin Films

2021 ◽  
Vol 8 ◽  
Author(s):  
Jinyu Ruan ◽  
Chao Yin ◽  
Tiandong Zhang ◽  
Hao Pan
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Surface Roughness ◽  
Electrical Properties ◽  
Seed Layer ◽  
Ferroelectric Properties ◽  
Lower Surface ◽  
Multilayer Films ◽  
Multilayer Thin Films ◽  
Orientation Growth

Ferroelectric multilayer films attract great attention for a wide variation of applications. The synergistic effect by combining different functional layers induces distinctive electrical properties. In this study, ferroelectric BaZr0.2Ti0.8O3/PbZr0.52Ti0.48O3/BaZr0.2Ti0.8O3 (BZT/PZT/BZT) multilayer thin films are designed and fabricated by using the magnetron sputtering method, and a LaNiO3 (LNO) seed layer is introduced. The microstructures and electrical properties of the BZT/PZT/BZT films with and without the LNO seed layer are systematically studied. The results show that the BZT/PZT/BZT/LNO thin film exhibits much lower surface roughness and a preferred (100)-orientation growth, with the growth template and tensile stress provided by the LNO layer. Moreover, an enhanced dielectric constant, decreased dielectric loss, and improved ferroelectric properties are achieved in BZT/PZT/BZT/LNO thin films. This work reveals that the seed layer can play an important role in improving the microstructure and properties of ferroelectric multilayer films.

Influence of SrTiO3 Buffer Layer on the Ferroelectric Properties of Bi2NiMnO6 Thin Film

2012 ◽  
Vol 139 (1) ◽  
pp. 26-31 ◽  
Author(s):  
J. L. Lai ◽  
X. G. Tang ◽  
C. B. Ma ◽  
R. Li ◽  
Q. X. Liu ◽  
...  
Keyword(s):  
Thin Film ◽  
Buffer Layer ◽  
Ferroelectric Properties

Ferroelectric Property of Ion Beam Enhanced Deposited Lithium Tantalate Thin Film

2011 ◽  
Vol 335-336 ◽  
pp. 1418-1423
Author(s):  
De Yin Zhang ◽  
Wei Qian ◽  
Kun Li ◽  
Jian Sheng Xie
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Surface Morphology ◽  
Hysteresis Loop ◽  
Ferroelectric Property ◽  
Ion Beam ◽  
Ferroelectric Properties ◽  
Fatigue Property ◽  
Lithium Tantalate ◽  
Electric Filed

The Ion Beam Enhanced Deposited (IBED) lithium tantalate (LiTaO3) thin film samples with Al/LiTaO3/Pt electrode structure were prepared on the Pt/Ti/SiO2/Si(100) and SiO2/Si(100) substrate respectively. The crystallization, surface morphology, ferroelectric property, and fatigue property of the prepared samples with the different annealed processes were investigated. The XRD measured results show that the prepared samples have the polycrystal structure of LiTaO3 with the preferred orientation of <012> and <104> located at the 2θ of 23.60 and 32.70 respectively. The SEM morphology analysis reveals the prepared film annealed at 550°C is uniform, smooth and crack-free on the surface and cross section. The ferroelectric property measured results show that the remanent polarization Pr of the samples annealed at different temperature almost increase with the electric field intensity stronger. The leakage current makes the hysteresis loop of the samples subjected to a strong measured electric filed difficult to appear the same saturation hysteresis loop as the single-crystal LiTaO3. The prepared samples annealed at 550°C have a Pr value of 11.5μC/cm2 when subjected to the electrical field of 400kV/cm. The breakdown voltage of the 587nm thick thin film sample is high as to 680 kV/cm. The fatigue property measured results show only 15.17% Pr drop of the prepared films annealed at 550°C appear after 5×1010 cycles polarized by the 10MHz sinusoidal signal with the peak-to-peak amplitude of 10 Volt. The ferroelectric properties of the prepared films meet the practical application requirements of charge response measurement of the LiTaO3 infrared detector owe to the Pr of the prepared films annealed at different temperature large beyond 10μC/cm2 when the prepared films subjected to a strong electric filed larger than 400 kV/cm. The experimental results also show that the surface morphology, the ferroelectric and fatigue properties of the IBED LiTaO3 thin films are significant better than those of the Sol-Gel derived LiTaO3 thin films.

scholarly journals Structural changes and band gap tunability with incorporation of n-butylammonium iodide in perovskite thin film

Heliyon ◽  
2020 ◽  
Vol 6 (2) ◽  
pp. e03364
Author(s):  
Leong Wei Xian Rebecca ◽  
Zainal Arif Burhanudin ◽  
Mundzir Abdullah ◽  
Mohamed Shuaib Mohamed Saheed
Keyword(s):  
Thin Film ◽  
Band Gap ◽  
Structural Changes
Sign in / Sign up

Export Citation Format

Share Document