Flexible Lead-Free Ba0.5Sr0.5TiO3/0.4BiFeO3-0.6SrTiO3 Dielectric Film Capacitor with High Energy Storage Performance

Ferroelectric thin film capacitors have triggered great interest in pulsed power systems because of their high-power density and ultrafast charge–discharge speed, but less attention has been paid to the realization of flexible capacitors for wearable electronics and power systems. In this work, a flexible Ba0.5Sr0.5TiO3/0.4BiFeO3-0.6SrTiO3 thin film capacitor is synthesized on mica substrate. It possesses an energy storage density of Wrec ~ 62 J cm−3, combined with an efficiency of η ~ 74% due to the moderate breakdown strength (3000 kV cm−1) and the strong relaxor behavior. The energy storage performances for the film capacitor are also very stable over a broad temperature range (−50–200 °C) and frequency range (500 Hz–20 kHz). Moreover, the Wrec and η are stabilized after 108 fatigue cycles. Additionally, the superior energy storage capability can be well maintained under a small bending radius (r = 2 mm), or after 104 mechanical bending cycles. These results reveal that the Ba0.5Sr0.5TiO3/0.4BiFeO3-0.6SrTiO3 film capacitors in this work have great potential for use in flexible microenergy storage systems.

Effect of Polarization on Performance of Inverted Solar Cells Based on Molecular Ferroelectric 1,6-Hexanediamine Pentaiodide Bismuth with PCBM as Electron Transport Layer

The depolarization field of ferroelectric photovoltaic materials can enhance the separation and transport of photogenerated carriers, which will improve the performance of photovoltaic devices, thus attracting the attention of researchers. In this paper, a narrow bandgap molecular ferroelectric Hexane-1,6-diammonium pentaiodobismuth (HDA-BiI5) was selected as the photo absorption layer for the fabrication of solar cells. After optimizing the ferroelectric thin film by the antisolvent process, the effect of different polarization voltages on the performance of ferroelectric devices was studied. The results showed that there was a significant increase in short-circuit current density, and the photoelectric conversion efficiency showed an overall increasing trend. Finally, we analyzed the internal mechanism of the effect of polarization on the device.

Local and correlated studies of humidity-mediated ferroelectric thin film surface charge dynamics

Electrochemical phenomena in ferroelectrics are of particular interest for catalysis and sensing applications, with recent studies highlighting the combined role of the ferroelectric polarisation, applied surface voltage and overall switching history. Here, we present a systematic Kelvin probe microscopy study of the effect of relative humidity and polarisation switching history on the surface charge dissipation in ferroelectric Pb(Zr0.2Ti0.8)O3 thin films. We analyse the interaction of surface charges with ferroelectric domains through the framework of physically constrained unsupervised machine learning matrix factorisation, Dictionary Learning, and reveal a complex interplay of voltage-mediated physical processes underlying the observed signal decays. Additional insight into the observed behaviours is given by a Fitzhugh–Nagumo reaction–diffusion model, highlighting the lateral spread and charge passivation process contributors within the Dictionary Learning analysis.

Structural Insights of Electrical Aging in PZT Thin Films as Revealed by In Situ Biasing X-ray Diffraction

Electrical aging in lead zirconate titanate (PbZrxTi1−xO3) thin films has been intensively studied from a macroscopic perspective. However, structural origins and consequences of such degradation are less documented. In this study, we have used synchrotron radiation to evaluate the behavior of ferroelectric domains by X-ray diffraction (XRD). The sample was loaded with an AC triangular bias waveform between ±10 V with a number of cycle varying from one up to 108. At each step of the aging procedure, XRD spectra had been collected in situ during the application of an electric field on a capacitor. The fine analysis of the (200) pseudo-cubic peak structure allows to separate the evolution of the volume of a/c tetragonal and rhombohedral domains along the electrical biasing. Throughout the aging, both intrinsic and extrinsic responses of tetra and rhombohedral domains are altered, the behavior depending on the observed phase. This methodology opens up new perspectives in the comprehension of the aging effect in ferroelectric thin film.