Effect of laser pulse repetition frequency on the optical breakdown threshold of quartz glass

2013 ◽  
Vol 43 (8) ◽  
pp. 731-734
Author(s):  
T V Kononenko ◽  
S Schöneseiffen ◽  
V I Konov ◽  
F Dausinger
2021 ◽  
pp. 2160019
Author(s):  
Z. Vakulov ◽  
D. Khakhulin ◽  
A. Geldash ◽  
R. V. Tominov ◽  
V. S. Klimin ◽  
...  

This paper reports the impact of the laser pulse repetition frequency on growth processes, morphological and electro-physical parameters of nanocrystalline LiNbO3 thin films obtained by the pulsed laser deposition technique. It was found that the nucleation process in LiNbO3 films could controllably change by increasing the laser pulse repetition frequency. The film obtained at the repetition frequency of 4 Hz consists of local islands and clusters with a diameter of 118.1 ± 5.9 nm. Nanocrystalline films, grown at the repetition frequency of 10 Hz, possess a continuous granular structure with a grain diameter of 235 ± 11.75 nm. Achieved results can be used for the development of promising “green” energy devices based on lead-free piezoelectric energy harvesters.


2011 ◽  
Vol 179-180 ◽  
pp. 891-894
Author(s):  
Dong Qing Yuan ◽  
Jian Ting Xu

With femtosecond laser pulse (130 fs, 800 nm, 1 kHz pulse repetition frequency) irradiation on Au/Cr film stack, several nanostructures were obtained. The influence of laser parameters such as fluence(0.5J/cm2,2J/cm2) and the number of pulse were investigate. With single pulse irradiation, the nanoline and periodic ripple structures were obtained for the pulse fluence of 0.5J/cm2 and 2J/cm2, respectively. The formation mechanism of those nanostructures were discussed.


1989 ◽  
Vol 19 (5) ◽  
pp. 673-675
Author(s):  
G Ya Glauberman ◽  
N F Pilipetskiĭ ◽  
S Yu Savanin ◽  
V V Shkunov

Sensors ◽  
2021 ◽  
Vol 21 (15) ◽  
pp. 5040
Author(s):  
Silvia Ronda Peñacoba ◽  
Mar Fernández Gutiérrez ◽  
Julio San Román del Barrio ◽  
Francisco Montero de Espinosa

Despite the use of therapeutic ultrasound in the treatment of soft tissue pathologies, there remains some controversy regarding its efficacy. In order to develop new treatment protocols, it is a common practice to carry out in vitro studies in cell cultures before conducting animal tests. The lack of reproducibility of the experimental results observed in the literature concerning in vitro experiments motivated us to establish a methodology for characterizing the acoustic field in culture plate wells. In this work, such acoustic fields are fully characterized in a real experimental configuration, with the transducer being placed in contact with the surface of a standard 12-well culture plate. To study the non-thermal effects of ultrasound on fibroblasts, two different treatment protocols are proposed: long pulse (200 cycles) signals, which give rise to a standing wave in the well with the presence of cavitation (ISPTP max = 19.25 W/cm2), and a short pulse (five cycles) of high acoustic pressure, which produces a number of echoes in the cavity (ISPTP = 33.1 W/cm2, with Pmax = 1.01 MPa). The influence of the acoustic intensity, the number of pulses, and the pulse repetition frequency was studied. We further analyzed the correlation of these acoustic parameters with cell viability, population, occupied surface, and cell morphology. Lytic effects when cavitation was present, as well as mechanotransduction reactions, were observed.


Sign in / Sign up

Export Citation Format

Share Document