Estimating smectite content from seismic data

2019 ◽  
Vol 59 (2) ◽  
pp. 851
Author(s):  
Roman Beloborodov ◽  
Marina Pervukhina ◽  
Valeriya Shulakova ◽  
Dimitri Chagalov ◽  
Matthew Josh ◽  
...  

Predicting the mineralogical composition of shales is crucial for drilling operations related to hydrocarbon exploration/production as well as for the assessment of their sealing capacity as hydrocarbon or CO2 barriers. For example, hydrocarbon exploration in the Northern Carnarvon Basin, North-West Shelf, Australia is hindered by the presence of a thick (up to 1 km) smectite-rich shale seal that spreads regionally. Complex structures of the channelised oil and gas fields in the area make it necessary to drill deviated wells through that seal. The maximum deviation angle at which successful drilling is possible depends strongly on the clay mineralogy and, in particular, on the smectite content in the shale. Here, we introduce a novel workflow combining seismic data, well logs and laboratory measurements to infer shale composition at the reservoir scale. It is applied to the Duyfken 3D seismic survey in the central part of the Northern Carnarvon Basin. Interpretation results are verified against the laboratory X-ray diffraction measurements from the test well that was not used for the interpretation. The results match the test data well within the determined uncertainty bounds.

2019 ◽  
Vol 38 (5) ◽  
pp. 385-391
Author(s):  
Roman Beloborodov ◽  
Marina Pervukhina ◽  
Matthew Josh ◽  
Michael B. Clennell ◽  
Juerg Hauser

Shales have always been a difficult target for drilling of deviated and horizontal wells. In the presence of azimuthal stress fields, inclined boreholes in smectite-rich shales exhibit geomechanical instabilities and can result in borehole failure. The complex geology of the major gas fields in the Northern Carnarvon Basin on the North West Shelf of Australia makes it necessary to drill deviated wells through the smectite-rich shale seal extending more than 1 km in thickness. Predicting the mineralogical composition of shales in the area is therefore crucial for the success of drilling operations related to hydrocarbon exploration and production. Here we introduce a novel workflow that combines seismic data, well logs, and laboratory measurements to rapidly infer smectite content in shale. The workflow is applied to the Duyfken 3D seismic survey in the central part of the Northern Carnarvon Basin. The results of our quantitative interpretation are verified against the laboratory X-ray diffraction measurements from the test well that was not used for interpretation, and they match the test data well within the determined uncertainty bounds.


2021 ◽  
Vol 61 (2) ◽  
pp. 640
Author(s):  
Abdul Kholiq ◽  
Claire Jacob ◽  
Bee Jik Lim ◽  
Oliver Schenk ◽  
Anubrati Mukherjee ◽  
...  

The Exmouth Sub-basin represents part of the intracratonic rift system of the northern Carnarvon Basin, Australia. Hydrocarbon exploration has resulted in the discovery of a variety of oil and gas accumulations, mainly in Upper Triassic, Upper Jurassic and Lower Cretaceous intervals. Recent 3D petroleum systems modelling aided in understanding the interaction of the complex basin evolution and hydrocarbon charge history, shedding light on the variety and distribution of hydrocarbon types encountered, whilst also highlighting future remaining potential in both proven and untested plays. As a result of this modelling, the Exmouth Subsurface Characterisation Study was commissioned to further leverage >12000km2of recently acquired and processed seismic data and integrate data from specifically conditioned wells from across the Exmouth Sub-basin. The primary study objective was to better understand the distribution of lithologies across the basin, with focus upon the reservoir presence and properties over proven and potential deeper sections. Furthermore, given the variety of hydrocarbon types encountered, this study set out to understand the amplitude behaviour of these types within the different reservoirs. Collectively, these results have aided in identifying analogous hydrocarbon amplitude responses across the basin, derisking identified plays, prospects and existing discoveries and fields whilst also identifying new plays and leads.


2017 ◽  
Vol 57 (1) ◽  
pp. 263 ◽  
Author(s):  
Roisin McGee ◽  
Jeff Goodall ◽  
Stephen Molyneux

The Lower to Middle Triassic mixed carbonate–clastic system in the Northern Carnarvon Basin is poorly understood relative to the stratigraphically younger Jurassic play systems. Few well penetrations and a lack of quality seismic data have deterred exploration of this interval for many years. In recent times, the Lower to Middle Triassic source potential has been comprehensively de-risked within the Roebuck Basin, with subsequent implications across the entire North West Shelf of Australia, opening up the possibility of an entirely new regional play fairway. This paper focuses on the Candace Terrace, on the southern flank of the Carnarvon Basin, where seismic observations and interpretations of Lower to Middle Triassic submarine canyon systems have been made. The stratigraphic elements of this play interval can now be more clearly observed with the aid of 3D seismic data. Amplitude extractions show the internal geometries of these highly erosive systems are sinuous, compensating flows. The aims of this paper are to postulate the stratigraphy of the Lower to Middle Triassic on the Candace Terrace, highlight the tectonic cause of the canyon systems and discuss the prospectivity of the observed turbidite features.


2002 ◽  
Vol 42 (1) ◽  
pp. 287 ◽  
Author(s):  
L.L. Pryer ◽  
K.K. Romine ◽  
T.S. Loutit ◽  
R.G. Barnes

The Barrow and Dampier Sub-basins of the Northern Carnarvon Basin developed by repeated reactivation of long-lived basement structures during Palaeozoic and Mesozoic tectonism. Inherited basement fabric specific to the terranes and mobile belts in the region comprise northwest, northeast, and north–south-trending Archaean and Proterozoic structures. Reactivation of these structures controlled the shape of the sub-basin depocentres and basement topography, and determined the orientation and style of structures in the sediments.The Lewis Trough is localised over a reactivated NEtrending former strike-slip zone, the North West Shelf (NWS) Megashear. The inboard Dampier Sub-basin reflects the influence of the fabric of the underlying Pilbara Craton. Proterozoic mobile belts underlie the Barrow Sub-basin where basement fabric is dominated by two structural trends, NE-trending Megashear structures offset sinistrally by NS-trending Pinjarra structures.The present-day geometry and basement topography of the basins is the result of accumulated deformation produced by three main tectonic phases. Regional NESW extension in the Devonian produced sinistral strikeslip on NE-trending Megashear structures. Large Devonian-Carboniferous pull-apart basins were introduced in the Barrow Sub-basin where Megashear structures stepped to the left and are responsible for the major structural differences between the Barrow and Dampier Sub-basins. Northwest extension in the Late Carboniferous to Early Permian marks the main extensional phase with extreme crustal attenuation. The majority of the Northern Carnarvon basin sediments were deposited during this extensional basin phase and the subsequent Triassic sag phase. Jurassic extension reactivated Permian faults during renewed NW extension. A change in extension direction occurred prior to Cretaceous sea floor spreading, manifest in basement block rotation concentrated in the Tithonian. This event changed the shape and size of basin compartments and altered fluid migration pathways.The currently mapped structural trends, compartment size and shape of the Barrow and Dampier Sub-basins of the Northern Carnarvon Basin reflect the “character” of the basement beneath and surrounding each of the subbasins.Basement character is defined by the composition, lithology, structure, grain, fabric, rheology and regolith of each basement terrane beneath or surrounding the target basins. Basement character can be discriminated and mapped with mineral exploration methods that use non-seismic data such as gravity, magnetics and bathymetry, and then calibrated with available seismic and well datasets. A range of remote sensing and geophysical datasets were systematically calibrated, integrated and interpreted starting at a scale of about 1:1.5 million (covering much of Western Australia) and progressing to scales of about 1:250,000 in the sub-basins. The interpretation produced a new view of the basement geology of the region and its influence on basin architecture and fill history. The bottom-up or basement-first interpretation process complements the more traditional top-down seismic and well-driven exploration methods, providing a consistent map-based regional structural model that constrains structural interpretation of seismic data.The combination of non-seismic and seismic data provides a powerful tool for mapping basement architecture (SEEBASE™: Structurally Enhanced view of Economic Basement); basement-involved faults (trap type and size); intra-sedimentary geology (igneous bodies, basement-detached faults, basin floor fans); primary fluid focussing and migration pathways and paleo-river drainage patterns, sediment composition and lithology.


2019 ◽  
Vol 59 (2) ◽  
pp. 886
Author(s):  
Alexander Karvelas ◽  
Bee Jik Lim ◽  
Lianping Zhang ◽  
Haryo Trihutomo ◽  
Oliver Schenk ◽  
...  

Hydrocarbon exploration has resulted in the discovery of a variety of oil and gas accumulations mainly in Upper Jurassic and Lower Cretaceous intervals. However, the distribution of the different petroleum system elements including Jurassic and Triassic intervals is poorly determined, but required for improved understanding of the complex charge history, as indicated by the variety of hydrocarbon types encountered in the basin. The new WesternGeco multiclient 3D seismic survey extends to the edges of the basin to give a comprehensive picture. Raw hydrophone data were delivered from the vessel as acquisition progressed to begin the near-surface model building. The model building consisted of two major stages: first, using full waveform inversion (FWI) to derive the near-surface velocity field; and, second, common image point (CIP) tomography to update the deeper section beyond the FWI illumination zone. As illustrated herein, various stages of processing and imaging provided a cleaner and crisper dataset across the record length, allowing (1) detailed picking of the events within the entire Mesozoic (Cretaceous–Triassic) section allowing key events to be interpreted and correlated across the area and (2) accurate investigation of the complexity of different aged fault networks and their relationships across the full Exmouth Sub-basin for the first time. In summary, this survey provides a detailed insight into the deeper basin architecture of the Exmouth Sub-basin. The seamless volume imaged to depth allows accurate mapping which is critical to unravel the complex evolutionary history in a basin with proven and significant remaining hydrocarbon potential.


2000 ◽  
Vol 40 (1) ◽  
pp. 119 ◽  
Author(s):  
R. Cowley ◽  
G.W. O'Brien

An extensive volume of 3D seismic data over a number of oil and gas fields in Australia's North West Shelf and Gippsland Basin has been examined for evidence of the effects of hydrocarbon migration and/or leakage. For comparative purposes, 2D and 3D data have also been studied over a number of adjacent traps, including dry traps and partially to completely breached accumulations. Fields and traps investigated include Bayu-Undan, Jabiru, Skua, Swift and Tahbilk in the Bonaparte Basin, Cornea in the Browse Basin, North Rankin, Chinook, Macedon, Enfield and Zeewulf in the Carnarvon Basin, and Kingfish in the Gippsland Basin. The principal goal of the study is to provide representative case studies from known fields so that, in undrilled regions, the exploration uncertainties associated with the issues of hydrocarbon charge and trap integrity might be reduced.Direct indicators of hydrocarbon migration and/or leakage are relatively rare throughout the basins studied, though the discoveries themselves characteristically show seismic anomalies attributable to hydrocarbon leakage. The nature and intensity of these hydrocarbon-related seismic effects do, however, vary dramatically between the fields. Over traps such as Skua, Swift, Tahbilk and Macedon, they are intense, whereas over others, for example Chinook and North Rankin, they are quite subtle. Hydrocarbon-related diagenetic zones (HRDZs), which had been identified previously above the reservoir zones of leaky traps within the Bonaparte Basin, have also been recognised within the Browse, Carnarvon, Otway and Gippsland Basins. HRDZs are the most common leakage indicators found and are identified easily via a combination of high seismic amplitudes through the affected zone, time pull-up and degraded stack response of underlying reflectors. In some cases (the Skua and Macedon Fields), the HRDZs actually define the extent of the accumulations at depth.Anomalous, subtle to strong, seismic amplitude anomalies are associated with the majority of the major fields within the Carnarvon Basin. The strength and location of the anomalies are related to a complex interplay between trap type (in particular four-way dip-closed versus fault dependent), top seal capacity, fault seal integrity, and charge history. In some areas within the Carnarvon, Browse and Bonaparte Basins, shallow amplitude anomalies can be related directly to gas chimneys emanating from the reservoir zone itself. In other instances, the continuous migration of gas from the reservoir has produced an assortment of pockmarks, mounds and amplitude anomalies on the present day sea floor, which all provide evidence of hydrocarbon seepage. In the Browse Basin, strong evidence has been found that many of the modern carbonate banks and reefs in the region were initially located over hydrocarbon seeps on the palaeo-seafloor.The examples and processes presented demonstrate that the analysis of hydrocarbon leakage indicators on seismic data can help to better understand exploration risk and locate subtle hydrocarbon accumulations. In mature exploration provinces, this methodology may lead to the identification of subtle accumulations previously left undetected by more conventional methods. In frontier regions, it can help to identify the presence of a viable petroleum system, typically the principal exploration uncertainty in undrilled regions.


2021 ◽  
Author(s):  
Jianfeng Yao ◽  
Xiang Li ◽  
Kai Zhao ◽  
Hui Zhang

Abstract Northern Carnarvon Basin is located in North West Shelf of Western Australia. The basin has over 10km sediments and owns both oil-prone and gas-prone sediments and is the current largest oil and gas producing basin in Australia. A geological section through this basin is shown in Figure 1, the complex geological settings from shallow to deep leads to significant processing challenges. In the vintage processing, the seismic image at reservoir level is deteriorated due to the presence of following geological complexities: 1) rugose water bottom, 2) shallow frequent canyons or channel systems, 3) shallow spatial-variant Tertiary carbonates, and 4) shallow gas chimneys and other geo-bodies. These complex overburdens plus limited small-angle coverage of primary reflections from narrow azimuth (NAZ) streamer surveys make it very difficult for ray-based reflection tomography to resolve the shallow velocity. As a result, the target image suffers from large well mis-ties, low signal-to-noise ratio (S/N) and severe event undulations. In addition, shallow fast-velocity layers cause severe illumination issues for deep targets which are compounded by limited offsets of NAZ surveys. Furthermore, localised absorption effects from gas pockets lead to dimming amplitudes for events beneath them. To deal with these issues, we propose to use time-lag full wave-form inversion (TLFWI) to resolve the velocity of complex overburdens and least-squares Q prestack depth migration (LS Q-PSDM) to compensate for illumination issues and absorption effects for the latest reprocessing. In the following sections, application procedure and results of these two technologies will be discussed. Seismic inversion was also conducted to assist the processing and analysis of the final result.


2021 ◽  
Vol 61 (2) ◽  
pp. 611
Author(s):  
Jarrad Grahame ◽  
Jianfeng Yao

The Davros-Typhon Multi-Client 3D surveys are located approximately 70km from the north-west coast of Australia, largely covering the NE trending Dampier Sub-basin and straddling the Rankin Trend within the Northern Carnarvon Basin. The basins within the North West Shelf formed as a result of seafloor spreading, associated with the breakup of the North West margin of East Gondwana. The combined, contiguous Davros-Typhon survey areas cover a number of significant discoveries and producing fields, which include both oil and gas accumulations. The key objective of the survey was to enhance the imaging of Triassic to Lower Cretaceous reservoir units and to develop a new interpretation framework, made possible by the modern broadband acquisition parameters and advanced processing techniques. Challenges associated with imaging and interpretation include the effects of high velocity carbonate overburden, steeply dipping structures, fault shadow and structural complexity at depth, which is critical for evaluation of reservoir targets. A major reprocessing effort was undertaken to further mitigate these issues, which included Davros and a number of adjacent existing 3D surveys, resulting in the Typhon Multi-Client 3D. CGG Multi-client and New Ventures geoscientists, in collaboration with CGG Seismic Imaging, have undertaken new interpretation and amplitude versus offset (AVO) inversion analysis using subsets of the Typhon 3D. The resulting volume-based attribute analysis and integration of new AVO inversion results demonstrates enhanced attribute quality for the reprocessed data and provides a platform for quantitative analysis over a large area of the Northern Carnarvon Basin.


2020 ◽  
Vol 60 (2) ◽  
pp. 753
Author(s):  
Oliver Schenk ◽  
Craig Dempsey ◽  
Robbie Benson ◽  
Michael Cheng ◽  
Sugandha Tewari ◽  
...  

The Exmouth Sub-basin is part of the Northern Carnarvon Basin, offshore north-west Australia, and has undergone a complex tectonic history. Hydrocarbon exploration resulted in the discovery of a variety of oil and gas accumulations; however, their distribution and charge history from different petroleum systems is still poorly understood due to limited knowledge of the deeper basin architecture. The basin-wide, long-offset, broadband 2017 Exmouth 3D multiclient seismic dataset allowed a seamless interpretation into this deeper section. This work revealed new insights on the tectono-stratigraphic evolution of the Exmouth Sub-basin. Mesozoic extension, that was restricted to the latest Triassic, was followed by a sag phase with homogeneous, shale-dominated deposition, resulting in source rock potential for the entire Jurassic section. These findings, together with potential field modelling, were integrated into this first basin-wide 3D petroleum system model to better constrain the thermal history and petroleum systems. The model improved our understanding of the complex charge history of hydrocarbon fields. It predicts that hydrocarbon expulsion from Late Jurassic source rocks continued into the Late Cretaceous, a period when the regional Early Cretaceous Muderong Formation was an efficient seal rock. This implies that, in addition to long-distance, sub-Muderong migration, vertical, short-distance migration may have contributed significant petroleum charge to the discovered accumulations in the southern Exmouth Sub-basin. The model also predicts additional prospective areas: fault-seal structures within Early Cretaceous intervals north of the Novara Arch, intra-formational Late Jurassic sandstones north of the current fields (with low biodegradation risk) and Triassic reservoirs along the basin margins and north of the Jurassic depocentre.


2021 ◽  
Author(s):  
Chris Elders ◽  
Sara Moron

<p>The North West Shelf of Australia has experienced numerous rift events during its prolonged evolution that most likely started in the Lower Palaeozoic and continued through to the formation of the present day passive margin in the Lower Cretaceous.  Carboniferous and Permian is associated with rifting of the Lhasa terrane, a phase extension in the Lower and Middle Jurassic associated with the separation of the Argo terrane Upper Jurassic to Lower Cretaceous extension culminated in the separation of Greater India and Australia.  Investigations based on interpretation of extensive, public domain seismic data, combined with numerical mechanical modelling, demonstrate that crustal structure, rheology and structural fabrics inherited from older events exert a significant control on the architecture of younger rifts.</p><p>Defining the older, more deeply buried rift episodes is challenging, but with seismic data that now images deeper structures more effectively, it is clear that NE-SW oriented Carboniferous to Permian aged rift structures control the overall geometry of the margin.  Variations in the timing, distribution and intensity of that rift may account for some of the complexity that governs the Triassic – a failed arm of the rift system might account for the accumulation of thick sequences of fluvio-delatic sediments in an apparent post-rift setting, while active deformation and igneous activity continued elsewhere on the margin.</p><p>A renewed phase of extension began in the latest Triassic in the western part of the Northern Carnarvon Basin, but became progressively younger to the NE.  High-resolution mechanical numerical experiments show that the dual mode of extension that characterises the Northern Carnarvon Basin, where both distributed and localised deformation occurs at the same time, is best explained by necking and boudinage of strong lower crust, inherited form the Permian rift event, proximal to the continental margin, and a subdued extensional strain rate across the distal extended margin.  A very clear and consistent pattern of ENE oriented extension, which interacts obliquely with the older NE-SW oriented Permian aged structures, is apparent across the whole of the Northern Carnarvon Basin and extends north east into the Roebuck and Browse Basins.  This is at odds with the NW-SE oriented extension predicted by the separation of the Argo terrane which occurs at this time.  This may be explained by the detached style of deformation that characterises the Mesozoic interval.  Alternatively, the separation of Greater India may have exerted a stronger influence on the evolution of the margin during the Jurassic than hitherto recognised.</p>


Sign in / Sign up

Export Citation Format

Share Document