Effect of marbling and chilled ageing on meat-quality traits, volatile compounds and sensory characteristics of beef longissimus dorsi muscle

2017 ◽  
Vol 57 (5) ◽  
pp. 981 ◽  
Author(s):  
Hoa Van Ba ◽  
Cynthia M. Oliveros ◽  
KyoungMi Park ◽  
Dashmaa Dashdorj ◽  
Inho Hwang
Keyword(s):  
Volatile Compounds ◽  
Shear Force ◽  
Fat Content ◽  
Eating Quality ◽  
Longissimus Dorsi ◽  
Quality Traits ◽  
Longissimus Dorsi Muscle ◽  
Dorsi Muscle ◽  
Technological Quality

Effects of marbling and chilled ageing on technological quality traits, volatile compounds and sensory characteristics of Hanwoo beef were investigated. Three marbling groups of longissimus dorsi muscles (n = 10 each), namely, high marbling (HM), moderate marbling (MM) and slight marbling (SM), classified according to the Korean carcass-grading system, were used. Each longissimus dorsi muscle from each marbling group was divided into two equal portions, vaccum-packaged and then assigned to 1- and 7-day ageing groups. The ageing was conducted in a chilling room at 4°C. Marbling level was significantly correlated with intramuscular fat content, shear force, cooking loss, tenderness and flavour. Particularly, the HM group had a lower shear force value, and higher fat content, lightness, tenderness, flavour and overall-liking scores than did MM and SM groups. Ageing significantly reduced the shear force value and increased tenderness, flavour and overall-liking scores for the HM group. Twenty-four volatile compounds were significantly influenced by marbling and/or ageing. The SM group had the highest concentration of benzaldehyde, while HM group had the highest concentrations of octanal, nonanal and dimethyl sulfide. In conclusion, our results demonstrated that a high marbling positively affected some technological quality traits and eating quality of beef, and ageing for 7 days reduced the shear force and improved eating quality of samples in the HM group, suggesting that the highly marbled beef responds to the ageing at a faster rate.

Evaluation of period of fasting and mixing of steers prior to slaughter on meat eating quality

2009 ◽  
Vol 2009 ◽  
pp. 138-138
Author(s):  
F O Lively ◽  
B W Moss ◽  
T W J Keady ◽  
L Farmer ◽  
N F S Gault ◽  
...  
Keyword(s):  
Shear Force ◽  
Eating Quality ◽  
Longissimus Dorsi ◽  
Glycogen Depletion ◽  
Meat Eating ◽  
Quadratic Relationship

Mixing of cattle prior to slaughter which results in aggressive activity (Mohan Raj et al 1992) leads to glycogen depletion pre-slaughter and subsequently meat with a higher ultimate pH (pHu). Purchas et al (1990) reported a quadratic relationship between pHu and tenderness with highest shear force values recorded between pHu 5.8 to 6.2. The aim of this study was to determine the effect of fasting and mixing of steers prior to slaughter on the meat eating quality of longissimus dorsi (LD) muscle.

scholarly journals Data from proteomic analysis of bovine Longissimus dorsi muscle associated with intramuscular fat content

Data in Brief ◽  
2018 ◽  
Vol 19 ◽  
pp. 1314-1317 ◽  
Author(s):  
Mirele D. Poleti ◽  
Luciana C.A. Regitano ◽  
Gustavo H.M.F. Souza ◽  
Aline S.M. Cesar ◽  
Rosineide C. Simas ◽  
...  
Keyword(s):  
Proteomic Analysis ◽  
Intramuscular Fat ◽  
Fat Content ◽  
Longissimus Dorsi ◽  
Longissimus Dorsi Muscle ◽  
Dorsi Muscle ◽  
Intramuscular Fat Content

scholarly journals Identification of eQTLs and sQTLs associated with meat quality in beef

2019 ◽  
Author(s):  
Joel David Leal Gutierrez ◽  
Mauricio A. Elzo ◽  
Raluca G. Mateescu
Keyword(s):  
Meat Quality ◽  
Fixed Effects ◽  
Differential Expression Analysis ◽  
Cytoskeletal Proteins ◽  
Longissimus Dorsi ◽  
Quality Traits ◽  
Master Regulators ◽  
Longissimus Dorsi Muscle ◽  
Meat Quality Traits ◽  
Dorsi Muscle

Abstract Background: Transcription has a substantial genetic control and genetic dissection of gene expression could help us understand the genetic architecture of complex phenotypes such as meat quality in cattle. The objectives of the present research were: 1) to perform eQTL and sQTL mapping analyses for meat quality traits in longissimus dorsi muscle; 2) to uncover genes whose expression is influenced by local or distant genetic variation; 3) to identify expression and splicing hot spots; and 4) to uncover genomic regions affecting the expression of multiple genes. Results: Eighty steers were selected for phenotyping, genotyping and RNA-seq evaluation. A panel of traits related to meat quality was recorded in longissimus dorsi muscle. Information on 112,042 SNPs and expression data on 8,588 autosomal genes and 87,770 exons from 8,467 genes were included in an expression and splicing quantitative trait loci (QTL) mapping (eQTL and sQTL, respectively). A gene, exon and isoform differential expression analysis previously carried out in this population identified 1,352 genes, referred to as DEG, as explaining part of the variability associated with meat quality traits. The eQTL and sQTL mapping was performed using a linear regression model in the R package Matrix eQTL. Genotype and year of birth were included as fixed effects, and population structure was accounted for by including as a covariate the first PC from a PCA analysis on genotypic data. The identified QTLs were classified as cis or trans using 1 Mb as the maximum distance between the associated SNP and the gene being analyzed. A total of 8,377 eQTLs were identified, including 75.6% trans, 10.4% cis, 12.5% DEG trans and 1.5% DEG cis; while 11,929 sQTLs were uncovered: 66.1% trans, 16.9% DEG trans, 14% cis and 3% DEG cis. Twenty-seven expression master regulators and 13 splicing master regulators were identified and were classified as membrane-associated or cytoskeletal proteins, transcription factors or DNA methylases. These genes could control the expression of other genes through cell signaling or by a direct transcriptional activation/repression mechanism. Conclusion: In the present analysis, we show that eQTL and sQTL mapping makes possible positional identification of gene and isoform expression regulators.

scholarly journals Meat Quality and Fatty Acid Profiles of Chinese Ningxiang Pigs Following Supplementation with N-Carbamylglutamate

Animals ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 88 ◽  
Author(s):  
Yueteng Xing ◽  
Xin Wu ◽  
Chunyan Xie ◽  
Dingfu Xiao ◽  
Bin Zhang
Keyword(s):  
Fatty Acid ◽  
Meat Quality ◽  
Shear Force ◽  
Control Diet ◽  
Basal Diet ◽  
Longissimus Dorsi ◽  
Fatty Acid Profiles ◽  
Adipose Tissues ◽  
Longissimus Dorsi Muscle ◽  
Dorsi Muscle

The present study evaluated the effects of dietary N-carbamylglutamate (NCG) on carcass traits, meat quality, and fatty acid profiles in the longissimus dorsi muscle and adipose tissues of Chinese Ningxiang pigs. A total of 36 castrated female pigs with a similar initial weight (43.21 ± 0.57 kg) were randomly assigned to two treatments (with six pens per treatment and three pigs per pen) and fed either a basal diet or a basal diet supplemented with 0.08% NCG for 56 days. Results showed that dietary NCG reduced shear force (p = 0.004) and increased drip loss (p = 0.044) in longissimus dorsi muscle of Ningxiang pigs. Moreover, increased levels of oleic acid (C18:1n9c) (p = 0.009), paullinic acid (C20:1) (p = 0.004), and α-linolenic acid (C18:3n3) (p < 0.001), while significant reduction in the proportions of arachidonic acid (C20:4n6) (p < 0.001) and polyunsaturated fatty acid (PUFA) (p = 0.017) were observed in the longissimus dorsi muscle of pigs fed NCG when compared with those fed the control diet. As for adipose tissues, the C20:1 (p = 0.045) proportion in dorsal subcutaneous adipose (DSA), as well as the stearic acid (C18:0) (p = 0.018) level in perirenal adipose (PA) were decreased when pigs were fed the NCG diet compared with those of the control diet. In contrast, the margaric acid (C17:0) (p = 0.043) proportion in PA were increased. Moreover, the NCG diet produced PA with a greater proportion of total PUFAs (p = 0.001) (particularly linoleic acid (C18:2n6c) (p = 0.001)) compared with those produced by the control diet. These findings suggest that dietary NCG has beneficial effects by decreasing the shear force and improving the healthfulness of fatty acid profiles, providing a novel strategy for enhancing meat quality of pigs.

Blade Tenderization Effects on Cooking and Palatability Characteristics of Steaks from Bullock and Cow Carcasses

1979 ◽  
Vol 42 (7) ◽  
pp. 563-566 ◽  
Author(s):  
G. C. SMITH ◽  
S. C. SEIDEMAN ◽  
Z. L. CARPENTER
Keyword(s):  
Connective Tissue ◽  
Shear Force ◽  
Cooking Time ◽  
Longissimus Dorsi ◽  
Sensory Panel ◽  
High Quality ◽  
Longissimus Dorsi Muscle ◽  
Dorsi Muscle ◽  
Blade Tenderization ◽  
Panel Evaluation

Steaks (n = 240) from bullock and cow carcasses were studied to determine effects of blade tenderization on cooking and palatability characteristics. After two control (0×) steaks were removed, strip loins, inside rounds, outside rounds and top sirloin butts (all boneless) were blade-tenderized; additional steaks were removed after one (1×) and two (2×) passes through a blade tenderizer. Evaluations included cooking time, cooking loss, visual degree of doneness, Warner-Bratzler shear force and sensory panel evaluation for tenderness, amount of organoleptically detectable connective tissue, flavor, juiciness and overall palatability. Blade tenderization of bullock muscles resulted in steaks which required less time to cook, had decreased amounts of organoleptically detectable connective tissue and had increased tenderness, flavor and overall palatability ratings. Blade tenderization of cow muscles had little or no effect on cooking characteristics, tenderness, flavor, or overall palatability of muscles from the round but increased the tenderness, decreased the shear force value and amount of organoleptically detectable connective tissue, and increased the overall palatability of the longissimus dorsi muscle. Blade tenderization, though it will usually improve tenderness, will not improve the product enough to make beef of unsatisfactory quality comparable to that from high quality beef.

Sign in / Sign up

Export Citation Format

Share Document