Seasonal changes in the photosynthetic response to CO2 and temperature in apple (Malus domestica cv. ‘Red Gala’) leaves during a growing season with a high temperature event

2015 ◽  
Vol 42 (3) ◽  
pp. 309 ◽  
Author(s):  
Dennis H. Greer
Keyword(s):  
High Temperature ◽  
High Temperatures ◽  
Malus Domestica ◽  
Seasonal Changes ◽  
Detrimental Effect ◽  
Late Summer ◽  
Growing Season ◽  
Heat Event ◽  
Internal Co2 ◽  
Photosynthetic Responses

Changes in the photosynthetic responses of Malus domestica cv. ‘Red Gala’ leaves to internal CO2 concentrations at leaf temperatures from 15°C to 40°C were followed across the growing season in field-grown trees exposed to a high temperature event in late summer. Light and CO2-saturated photosynthesis (Amax), maximum rates of ribulose 1,5-bisphosphate (RuBP) carboxylation (Vcmax) and maximum rates of electron transport (Jmax) were all highest in spring, although Amax was maximal at 30°C, and Vcmax and Jmax were maximal at 40°C. All attributes declined in late summer and reached minima that coincided with the occurrence of the high temperature event. Modelling suggested many of the changes were correlated with the seasonal climate, although the measurement or current temperature had an overriding effect, especially on stomatal conductance. Marked changes in the temperature-dependency of Vcmax and Jmax occurred across the season and appeared to relate to the seasonal changes in climate, especially temperature. The reduction in photosynthesis at high temperatures was, however, partly attributable to a stomatal limitation of up to 60% at the high temperatures. Non-stomatal reductions in photosynthesis during the heat event could be attributed to detrimental effect on RuBP carboxylation and on RuBP regeneration.

Modelling seasonal changes in the temperature-dependency of CO2 photosynthetic responses in two Vitis vinifera cultivars

2018 ◽  
Vol 45 (3) ◽  
pp. 315 ◽  
Author(s):  
Dennis H. Greer
Keyword(s):  
Vitis Vinifera ◽  
Seasonal Changes ◽  
Vitis Vinifera L ◽  
Temperature Dependency ◽  
Seasonal Climate ◽  
Average Temperature ◽  
Internal Co2 ◽  
Photosynthetic Responses ◽  
Temperature Optima ◽  
Cultivar Difference

A study of photosynthesis of two grapevine cultivars, Vitis vinifera L. cv. Chardonnay and cv. Merlot in relation to the seasonal climate and internal CO2 (Ci) concentration at leaf temperatures from 15 to 45°C was undertaken. Average rates of photosynthesis at saturating CO2 concentrations and all leaf temperatures were higher in Merlot compared with Chardonnay leaves. This was attributable to higher rates of ribulose 1,5-bisphosphate (RuBP) carboxylation (Vcmax) and regeneration (Jmax) in Merlot leaves. These differences in photosynthesis were extended as the season progressed, partly because rates of RuBP carboxylation and regeneration of Chardonnay leaves declined markedly whereas rates for Merlot leaves remained high. Although there was no cultivar difference in the seasonal average temperature optima for assimilation (34°C) and the underlying metabolism (40°C for Vcmax and 35°C for Jmax), for temperatures above 35°C, the Merlot leaves had 50% higher rates. Across the season, activation energies of the temperature sensitivity of Vcmax and Jmax declined in response to the seasonal climate but were consistently lower in Merlot than Chardonnay. This suggested some apparent differences in the biochemistry occurred between the two cultivars that limited assimilation in Chardonnay leaves, especially at higher temperatures, but did not limit assimilation in Merlot leaves.

High Temperature n- and p-type Doped Microcrystalline Silicon Layers Grown by VHF PECVD Layer-by-Layer Deposition

2003 ◽  
Vol 762 ◽  
Author(s):  
A. Gordijn ◽  
J.K. Rath ◽  
R.E.I. Schropp
Keyword(s):  
Activation Energy ◽  
High Temperature ◽  
High Temperatures ◽  
Continuous Wave ◽  
Hydrogen Plasma ◽  
Silicon Layer ◽  
Dark Conductivity ◽  
High Deposition Rate ◽  
Layer By Layer ◽  
Microcrystalline Silicon

AbstractDue to the high temperatures used for high deposition rate microcrystalline (μc-Si:H) and polycrystalline silicon, there is a need for compact and temperature-stable doped layers. In this study we report on films grown by the layer-by-layer method (LbL) using VHF PECVD. Growth of an amorphous silicon layer is alternated by a hydrogen plasma treatment. In LbL, the surface reactions are separated time-wise from the nucleation in the bulk. We observed that it is possible to incorporate dopant atoms in the layer, without disturbing the nucleation. Even at high substrate temperatures (up to 400°C) doped layers can be made microcrystalline. At these temperatures, in the continuous wave case, crystallinity is hindered, which is generally attributed to the out-diffusion of hydrogen from the surface and the presence of impurities (dopants).We observe that the parameter window for the treatment time for p-layers is smaller compared to n-layers. Moreover we observe that for high temperatures, the nucleation of p-layers is more adversely affected than for n-layers. Thin, doped layers have been structurally, optically and electrically characterized. The best n-layer made at 400°C, with a thickness of only 31 nm, had an activation energy of 0.056 eV and a dark conductivity of 2.7 S/cm, while the best p-layer made at 350°C, with a thickness of 29 nm, had an activation energy of 0.11 V and a dark conductivity of 0.1 S/cm. The suitability of these high temperature n-layers has been demonstrated in an n-i-p microcrystalline silicon solar cell with an unoptimized μc-Si:H i-layer deposited at 250°C and without buffer. The Voc of the cell is 0.48 V and the fill factor is 70 %.

NICROFER 5520 Co

Alloy Digest ◽  
1995 ◽  
Vol 44 (3) ◽  
Keyword(s):  
High Temperature ◽  
Chemical Composition ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperatures ◽  
Heat Treating ◽  
High Temperature Corrosion ◽  
Creep Properties ◽  
Nickel Chromium ◽  
Temperature Performance

Abstract NICROFER 5520 Co is a nickel-chromium-cobalt-molybdenum alloy with excellent strength and creep properties up to high temperatures. Due to its balanced chemical composition the alloy shows outstanding resistance to high temperature corrosion in the form of oxidation and carburization. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-480. Producer or source: VDM Technologies Corporation.

CARLSON ALLOY C601

Alloy Digest ◽  
1994 ◽  
Vol 43 (7) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
High Temperatures ◽  
Stress Corrosion Cracking ◽  
Heat Treating ◽  
Resistance To Stress ◽  
Extended Exposure ◽  
Sulfur Containing

Abstract Carlson Alloy C601 is characterized by high tensile, yield and creep-rupture strengths for high temperature service. The alloy is not embrittled by extended exposure to high temperatures and has excellent resistance to stress-corrosion cracking, to carburizing, nitriding and sulfur containing environments. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ni-458. Producer or source: G.O. Carlson Inc.

INCOTHERM TD

Alloy Digest ◽  
2005 ◽  
Vol 54 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
High Temperatures ◽  
Rare Earths ◽  
Temperature Performance

Abstract Incotherm TD is a thermocouple-sheathing alloy with elements of silicon and rare earths to enhance oxidation resistance at high temperatures. This datasheet provides information on composition, physical properties, and tensile properties as well as deformation. It also includes information on high temperature performance and corrosion resistance as well as forming. Filing Code: Ni-628. Producer or source: Special Metals Corporation.

HASTELLOY ALLOY X

Alloy Digest ◽  
1954 ◽  
Vol 3 (12) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
High Temperatures ◽  
Heat Treating ◽  
Operating Conditions ◽  
Molybdenum Alloy ◽  
High Temperature Strength ◽  
Nickel Chromium

Abstract HASTELLOY Alloy X is a nickel-chromium-iron-molybdenum alloy recommended for high-temperature applications. It has outstanding oxidation resistance at high temperatures under most operating conditions, and good high-temperature strength. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on forming, heat treating, and machining. Filing Code: Ni-14. Producer or source: Haynes Stellite Company.

KUBOTA ALLOY HT

Alloy Digest ◽  
2011 ◽  
Vol 60 (11) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Oxidation Resistance ◽  
High Temperatures ◽  
Temperature Performance ◽  
Iron Chromium

Abstract Kubota Alloy HT is an iron-chromium-nickel alloy that has both strength and oxidation resistance at high temperatures. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on high temperature performance as well as casting and joining. Filing Code: SS-1108. Producer or source: Kubota Metal Corporation, Fahramet Division.

KENTANIUM K138A

Alloy Digest ◽  
1964 ◽  
Vol 13 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
High Temperature ◽  
Titanium Carbide ◽  
Physical Properties ◽  
Engineering Design ◽  
High Temperatures

Abstract Kentanium K138-A is a high temperature titanium carbide that greatly widens the scope of the engineering design where conditions of intermittent or continuous high temperatures in oxidizing atmospheres are combined with abrasion, and compressive or tensile loads. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as fracture toughness, creep, and fatigue. It also includes information on machining and joining. Filing Code: Ti-40. Producer or source: Kennametal Inc..

RA 309

Alloy Digest ◽  
1963 ◽  
Vol 12 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperatures ◽  
Heat Treating ◽  
Corrosion Resistant Steel ◽  
Resistant Steel ◽  
Corrosion Resistant ◽  
Temperature Performance

Abstract RA 309 is a chromium-nickel heat and corrosion resistant steel recommended for high temperatures applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-142. Producer or source: Rolled Alloys Inc..

scholarly journals Photoprotective Strategies in Mediterranean High-Mountain Grasslands

Diversity ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 137
Author(s):  
Rosina Magaña Ugarte ◽  
María Pilar Gómez-Serranillos ◽  
Adrián Escudero ◽  
Rosario G. Gavilán
Keyword(s):  
Seasonal Changes ◽  
Detrimental Effect ◽  
Ultraviolet B ◽  
High Mountain ◽  
Central Spain ◽  
Adverse Conditions ◽  
Optimal Functioning ◽  
Mountain Grasslands ◽  
Lutein Content ◽  
Mountain Plants

Albeit the remarkably high Ultraviolet B loads, high temperatures, and drought stress substantiate the need for efficient photoprotective strategies in Mediterranean high-mountain plants, these remain understudied. Considering the sensitivity of photosystems to extreme conditions, we evaluated an environmental gradient’s weight on the photoprotection of five high-mountain specialists from Central Spain. Diurnal and seasonal variations in chlorophyll, chlorophyll fluorescence, carotenoids, and xanthophylls in consecutive and climatically contrasting years were taken to evaluate the effect of the impending climate coarsening at the photosystem level. Our results revealed significant differences among species in the xanthophyll cycle functioning, acting either as a continuous photoprotective strategy enhancing photochemistry-steadiness; or prompted only to counteract the cumulative effects of atypically adverse conditions. The lutein cycle’s involvement is inferred from the high lutein content found in all species and elevations, acting as a sustained photoprotective strategy. These findings added to high de-epoxidation state (DEPS) and minor seasonal changes in the chlorophyll a/b ratio, infer the xanthophyll and Lutein cycles are crucial for upkeeping the photosystems’ optimal functioning in these plants heightening their photoprotective capacity during periods of more unfavorable conditions. Nevertheless, an atypically dry growing season’s detrimental effect infers the feasible surpassing of stress-thresholds and the precariousness of the communities’ functional diversity under climate change.

Sign in / Sign up

Export Citation Format

Share Document