Efficient development of cycle time response surfaces using progressive simulation metamodeling

2013 ◽  
Vol 52 (10) ◽  
pp. 3097-3109 ◽  
Author(s):  
Liam Y. Hsieh ◽  
Kuo-Hao Chang ◽  
Chen-Fu Chien
Keyword(s):  
Cycle Time ◽  
Response Surfaces ◽  
Time Response ◽  
Simulation Metamodeling

Application of the Warm Hydroforming Process to the Manufacturing of Pre-Aged 6xxx Series Components Using a Numerical/Experimental Approach

2014 ◽  
Vol 622-623 ◽  
pp. 701-708 ◽  
Author(s):  
G. Palumbo ◽  
Antonio Piccininni ◽  
Pasquale Guglielmi ◽  
Donato Sorgente ◽  
Leonardo Daniele Scintilla ◽  
...  
Keyword(s):  
Cycle Time ◽  
Experimental Approach ◽  
Response Surfaces ◽  
Forming Limit ◽  
Bursting Pressure ◽  
Process Conditions ◽  
Al Alloy ◽  
Fe Model ◽  
Warm Hydroforming ◽  
6Xxx Series

In this work the Warm Hydroforming (WHF) process for the production of a 6xxx series Al alloy component has been investigated using a numerical/experimental approach: both experimental and numerical hydroforming tests were carried out using the alloy AC170PX, a pre aged (T4 condition) Al alloy often adopted for automotive applications. In order to evaluate both the mechanical and strain behaviour of the material, tensile tests were carried out at different temperature and strain rate levels using the Gleeble system 3180, keeping also into account the ageing effect; in addition, formability (Nakazima) tests in warm conditions were performed by means of a specific equipment and the Forming Limit Curves at different temperature levels were evaluated according to the ISO standard 12004-2. Hydroforming experiments were carried out using a prototypal press machine specifically designed for WHF and SuperPlastic Forming tests. Such tests, scheduled by a DoE approach, were aimed at investigating the suitability of using the investigated Al alloy in the WHF process: attention was thus focused on those parameters mainly affecting the aging phenomenon (temperature, heating time and cycle time). In order to overcome the actual physical limitation of the hydroforming facilities, a Finite Element (FE) model of the WHF process was also created implementing experimental data (flow stress curves and FLCs) and tuned using data from preliminary WHF tests. In particular, after setting the Coefficient Of Friction (COF) according to temperature and verifying the robustness of numerical simulations, the FE model was used for investigating: (i) the influence of the Blank Holder Force (neglected in the experimental campaign); (ii) the adoption of quite smaller values of the parameter cycle time (being the aim to determine higher strain rates in the material). Through the definition of proper response variables (Flatness, Bursting Pressure and Thickness Ratio) both experimental and numerical results were analyzed by means of polynomial Response Surfaces in order to evaluate the optimal process conditions.

Design of spline surface vacuum gripper for pick and place robotic arms

2020 ◽  
Vol 4 (2) ◽  
pp. 48-55
Author(s):  
A. S. Jamaludin ◽  
M. N. M. Razali ◽  
N. Jasman ◽  
A. N. A. Ghafar ◽  
M. A. Hadi
Keyword(s):  
Cycle Time ◽  
Industrial Robot ◽  
Annealing Process ◽  
Vacuum Suction ◽  
Robotic Arms ◽  
Custom Made ◽  
Pick And Place ◽  
Manufacturing Procedure ◽  
Production Flexibility ◽  
The Impact

The gripper is the most important part in an industrial robot. It is related with the environment around the robot. Today, the industrial robot grippers have to be tuned and custom made for each application by engineers, by searching to get the desired repeatability and behaviour. Vacuum suction is one of the grippers in Watch Case Press Production (WCPP) and a mechanism to improve the efficiency of the manufacturing procedure. Pick and place are the important process for the annealing process. Thus, by implementing vacuum suction gripper, the process of pick and place can be improved. The purpose of vacuum gripper other than design vacuum suction mechanism is to compare the effectiveness of vacuum suction gripper with the conventional pick and place gripper. Vacuum suction gripper is a mechanism to transport part and which later sequencing, eliminating and reducing the activities required to complete the process. Throughout this study, the process pick and place became more effective, the impact on the production of annealing process is faster. The vacuum suction gripper can pick all part at the production which will lower the loss of the productivity. In conclusion, vacuum suction gripper reduces the cycle time about 20%. Vacuum suction gripper can help lower the cycle time of a machine and allow more frequent process in order to increase the production flexibility.

GROWTH HORMONE AND RADIO-SULFATE INCORPORATION IN COSTAL CARTILAGE

1961 ◽  
Vol 37 (2) ◽  
pp. 176-182 ◽  
Author(s):  
Elliott J. Collins ◽  
Vernon F. Baker
Keyword(s):  
Growth Hormone ◽  
Costal Cartilage ◽  
Time Response ◽  
Hormone Activity ◽  
Reliable Estimation ◽  
Hypophysectomized Rats ◽  
Related Response ◽  
Sulfate Incorporation

ABSTRACT The characteristics and nature of the effect of growth hormone on the incorporation of radio-sulfate into the costal cartilage of hypophysectomized rats has been studied. The time-response studies indicate that a reliable estimation of growth hormone activity can be ascertained within a 24 hour period, and a reproducible dose-related response can be obtained at dosage levels ranging from 12-48 μg. Growth hormone stimulates the synthesis of organic sulfates and accumulation of inorganic sulfates within 48 hours.

Sign in / Sign up

Export Citation Format

Share Document