scholarly journals Dependence of model-based extreme flood estimation on the calibration period: case study of the Kamp River (Austria)

2015 ◽  
Vol 60 (7-8) ◽  
pp. 1424-1437 ◽  
Author(s):  
P. Brigode ◽  
E. Paquet ◽  
P. Bernardara ◽  
J. Gailhard ◽  
F. Garavaglia ◽  
...  
Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1261
Author(s):  
Christopher Gradwohl ◽  
Vesna Dimitrievska ◽  
Federico Pittino ◽  
Wolfgang Muehleisen ◽  
András Montvay ◽  
...  

Photovoltaic (PV) technology allows large-scale investments in a renewable power-generating system at a competitive levelized cost of electricity (LCOE) and with a low environmental impact. Large-scale PV installations operate in a highly competitive market environment where even small performance losses have a high impact on profit margins. Therefore, operation at maximum performance is the key for long-term profitability. This can be achieved by advanced performance monitoring and instant or gradual failure detection methodologies. We present in this paper a combined approach on model-based fault detection by means of physical and statistical models and failure diagnosis based on physics of failure. Both approaches contribute to optimized PV plant operation and maintenance based on typically available supervisory control and data acquisition (SCADA) data. The failure detection and diagnosis capabilities were demonstrated in a case study based on six years of SCADA data from a PV plant in Slovenia. In this case study, underperforming values of the inverters of the PV plant were reliably detected and possible root causes were identified. Our work has led us to conclude that the combined approach can contribute to an efficient and long-term operation of photovoltaic power plants with a maximum energy yield and can be applied to the monitoring of photovoltaic plants.


2021 ◽  
Vol 1 ◽  
pp. 2127-2136
Author(s):  
Olivia Borgue ◽  
John Stavridis ◽  
Tomas Vannucci ◽  
Panagiotis Stavropoulos ◽  
Harry Bikas ◽  
...  

AbstractAdditive manufacturing (AM) is a versatile technology that could add flexibility in manufacturing processes, whether implemented alone or along other technologies. This technology enables on-demand production and decentralized production networks, as production facilities can be located around the world to manufacture products closer to the final consumer (decentralized manufacturing). However, the wide adoption of additive manufacturing technologies is hindered by the lack of experience on its implementation, the lack of repeatability among different manufacturers and a lack of integrated production systems. The later, hinders the traceability and quality assurance of printed components and limits the understanding and data generation of the AM processes and parameters. In this article, a design strategy is proposed to integrate the different phases of the development process into a model-based design platform for decentralized manufacturing. This platform is aimed at facilitating data traceability and product repeatability among different AM machines. The strategy is illustrated with a case study where a car steering knuckle is manufactured in three different facilities in Sweden and Italy.


Author(s):  
Pantelis Capros ◽  
Marilena Zampara ◽  
Nikos Tasios ◽  
Dimitris Papadopoulos ◽  
Christoph Kost ◽  
...  

2014 ◽  
Vol 14 (5) ◽  
pp. 1283-1298 ◽  
Author(s):  
D. Lawrence ◽  
E. Paquet ◽  
J. Gailhard ◽  
A. K. Fleig

Abstract. Simulation methods for extreme flood estimation represent an important complement to statistical flood frequency analysis because a spectrum of catchment conditions potentially leading to extreme flows can be assessed. In this paper, stochastic, semi-continuous simulation is used to estimate extreme floods in three catchments located in Norway, all of which are characterised by flood regimes in which snowmelt often has a significant role. The simulations are based on SCHADEX, which couples a precipitation probabilistic model with a hydrological simulation such that an exhaustive set of catchment conditions and responses is simulated. The precipitation probabilistic model is conditioned by regional weather patterns, and a bottom–up classification procedure was used to define a set of weather patterns producing extreme precipitation in Norway. SCHADEX estimates for the 1000-year (Q1000) discharge are compared with those of several standard methods, including event-based and long-term simulations which use a single extreme precipitation sequence as input to a hydrological model, statistical flood frequency analysis based on the annual maximum series, and the GRADEX method. The comparison suggests that the combination of a precipitation probabilistic model with a long-term simulation of catchment conditions, including snowmelt, produces estimates for given return periods which are more in line with those based on statistical flood frequency analysis, as compared with the standard simulation methods, in two of the catchments. In the third case, the SCHADEX method gives higher estimates than statistical flood frequency analysis and further suggests that the seasonality of the most likely Q1000 events differs from that of the annual maximum flows. The semi-continuous stochastic simulation method highlights the importance of considering the joint probability of extreme precipitation, snowmelt rates and catchment saturation states when assigning return periods to floods estimated by precipitation-runoff methods. The SCHADEX methodology, as applied here, is dependent on observed discharge data for calibration of a hydrological model, and further study to extend its application to ungauged catchments would significantly enhance its versatility.


Sign in / Sign up

Export Citation Format

Share Document